Mod from Onealex

[Brooksie]

I've followed all the steps for how to install the onealex mod for SH3. And I'm right at the end where I'm trying to get into silent hunter commander, but I can't. When I attempt to launch it, it of course prompts me to run it as admin. I do so. Then it loads up, but doesn't appear on my screen. However, I see it in the taskbar. And when I hover over it with the mouse, it's just all white. I cannot enlarge it or move it or anything. Due to this, I'm unable to use the mod or play the game. I've got no idea what to do.

[Doolar]

Dumb questions here .... only because I really can't think of anything else and sorry about that, but did you set up a save game folder in your Doc Folder and did you point your install to it. If you did, then I don't know. I guess I would delete that save game folder and the rebuild it by ... starting SH3 via the SH3.exe in your game folder, let it run till you see the "options", and while your there set the Language to German (setting the language is NOT causing your issue, but you might as well set it while your there). Exit out. Start SH3 via the Cmdr.exe (Commander). You should get an explorer window asking you you select your install. You've rebuilt your Save Game Folder so if that was messed up, it's fixed. Make sure all your importation .exe's (SH3.exe, Cmdr.exe and JSGME.exe) are set to " Run as Administrator" and set to "Win 7 compatabilly." this is what I would try . If I was unsucessful, then I myself would start from scratch.

INSTALLATION OF ONEALEX
1. Download ONEALEX 1.xx and UnZip the SH3 Folder to your choice of location (not in Program Files).
2. Open the SH3 folder and locate these 3 executables, the SH3.exe, Cmdr.exe (located in the SH3 Commander’s English Folder) and the JSGME.exe. Change each executable, by right clicking and selecting their Properties, to WIN7 compatibly / and run as ADMIN. (this is very important)
3. Start the game via the SH3.exe, (not SH3 Commander) to set a SAVE FOLDER. (if you don’t already have a SAVE FOLDER from a previous installation, this will create one).
4. Set game OPTIONS to GERMAN LANGUAGE (or you will have no voices).
5. Exit game.
6. Add Mods you want from SH3 MODS Folder by activating them via JSGME.
7. I place a Cmdr Shortcut on my desktop, by R-click Cmdr.exe, select "PIN TO TASKBAR" or PIN TO START . (Totally Un-Necessary, I do this for my convenience, to start the game easier)
8. I place a JSGME Shortcut on my desktop, by R-click JSGME.exe, select "PIN TO TASKBAR" or PIN TO START . (Totally Un-Necessary, I do this for my convenience, to adjust the game add-in mods easier)
9. Set OPTIONS in SH3 Cmdr. to your liking.
10. Setup Career & Play, via SH3 Commander

hope this helps

[Brooksie]

Originally Posted by Doolar

Dumb questions here .... only because I really can't think of anything else and sorry about that, but did you set up a save game folder in your Doc Folder and did you point your install to it. If you did, then I don't know. I guess I would delete that save game folder and the rebuild it by ... starting SH3 via the SH3.exe in your game folder, let it run till you see the "options", and while your there set the Language to German (setting the language is NOT causing your issue, but you might as well set it while your there). Exit out. Start SH3 via the Cmdr.exe (Commander). You should get an explorer window asking you you select your install. You've rebuilt your Save Game Folder so if that was messed up, it's fixed. Make sure all your importation .exe's (SH3.exe, Cmdr.exe and JSGME.exe) are set to " Run as Administrator" and set to "Win 7 compatabilly." this is what I would try . If I was unsucessful, then I myself would start from scratch.

INSTALLATION OF ONEALEX
1. Download ONEALEX 1.xx and UnZip the SH3 Folder to your choice of location (not in Program Files).
2. Open the SH3 folder and locate these 3 executables, the SH3.exe, Cmdr.exe (located in the SH3 Commander’s English Folder) and the JSGME.exe. Change each executable, by right clicking and selecting their Properties, to WIN7 compatibly / and run as ADMIN. (this is very important)
3. Start the game via the SH3.exe, (not SH3 Commander) to set a SAVE FOLDER. (if you don’t already have a SAVE FOLDER from a previous installation, this will create one).
4. Set game OPTIONS to GERMAN LANGUAGE (or you will have no voices).
5. Exit game.
6. Add Mods you want from SH3 MODS Folder by activating them via JSGME.
7. I place a Cmdr Shortcut on my desktop, by R-click Cmdr.exe, select "PIN TO TASKBAR" or PIN TO START . (Totally Un-Necessary, I do this for my convenience, to start the game easier)
8. I place a JSGME Shortcut on my desktop, by R-click JSGME.exe, select "PIN TO TASKBAR" or PIN TO START . (Totally Un-Necessary, I do this for my convenience, to adjust the game add-in mods easier)
9. Set OPTIONS in SH3 Cmdr. to your liking.
10. Setup Career & Play, via SH3 Commander

hope this helps

Thank you for your reply. I appreciate the assistance. I have done the following...

-I watched the install tutorial 100% through, twice.
-Restarted my computer every time it didn't work.
-Deleted all anti-virus software from my PC.
-Tried different compatibility modes for all three executables (Windows Vista and Windows XP2).
-Read the install manual from the discord many times.
-Checked drivers, checked for viruses, checked for updates, checked for corrupt files. Fixed any problems that I encountered.
-Watched "how-to" videos on how to fix applications running in the taskbar not showing on display.
-Done a dozen checks for compatibility and admin priv for all three main executables to ensure they're correct.
-Uninstalled and reinstalled +6 times, followed instructions, using different file extractors for some of them.
-Followed the instructions to a tee each time for installation.
-Set up the save game folder in documents after loading into a fresh install of SH3 (not the Steam version but one found in the mod).
-Changed appropriate settings in SH3 to meet requirements for the mod.
-Set up JSGME where there were no overlapping errors for mods.
-Created shortcuts onto my desktop for the main executables.
-Drank half a dozen beers in anger/frustration.

I never get to the point where I see the Explorer window. I can't even get Silent Hunter Commander to display itself on my main screen. Even though it's running (not frozen I checked task manager). All I can do is hover over it on the taskbar with my mouse and see a blank, white page. The same goes for when I try Alt+Tab.

I'm a bit confused. What do you mean by "Did you point your install to it." Are you referring to the JSGME mod loader when it asks me to identify which folder sh3.exe is located in? If so, yes. I've done this correctly. Otherwise, I don't know what you mean. I dropped the GWX Onealex folder in the root C: drive. As shown in the image attached to this post. I've also attached another image of what I'm talking about with the Silent Hunter Commander executable. I have never, in SH3 or SH4 been able to successfully mod the game. This is always how it goes and every single time, it kills me. Something is wrong and I can never find out what. I eagerly await a reply from anyone who has an idea, thank you.

[Brooksie]

Originally Posted by Doolar

Dumb questions here .... only because I really can't think of anything else and sorry about that, but did you set up a save game folder in your Doc Folder and did you point your install to it. If you did, then I don't know. I guess I would delete that save game folder and the rebuild it by ... starting SH3 via the SH3.exe in your game folder, let it run till you see the "options", and while your there set the Language to German (setting the language is NOT causing your issue, but you might as well set it while your there). Exit out. Start SH3 via the Cmdr.exe (Commander). You should get an explorer window asking you you select your install. You've rebuilt your Save Game Folder so if that was messed up, it's fixed. Make sure all your importation .exe's (SH3.exe, Cmdr.exe and JSGME.exe) are set to " Run as Administrator" and set to "Win 7 compatabilly." this is what I would try . If I was unsucessful, then I myself would start from scratch.

INSTALLATION OF ONEALEX
1. Download ONEALEX 1.xx and UnZip the SH3 Folder to your choice of location (not in Program Files).
2. Open the SH3 folder and locate these 3 executables, the SH3.exe, Cmdr.exe (located in the SH3 Commander’s English Folder) and the JSGME.exe. Change each executable, by right clicking and selecting their Properties, to WIN7 compatibly / and run as ADMIN. (this is very important)
3. Start the game via the SH3.exe, (not SH3 Commander) to set a SAVE FOLDER. (if you don’t already have a SAVE FOLDER from a previous installation, this will create one).
4. Set game OPTIONS to GERMAN LANGUAGE (or you will have no voices).
5. Exit game.
6. Add Mods you want from SH3 MODS Folder by activating them via JSGME.
7. I place a Cmdr Shortcut on my desktop, by R-click Cmdr.exe, select "PIN TO TASKBAR" or PIN TO START . (Totally Un-Necessary, I do this for my convenience, to start the game easier)
8. I place a JSGME Shortcut on my desktop, by R-click JSGME.exe, select "PIN TO TASKBAR" or PIN TO START . (Totally Un-Necessary, I do this for my convenience, to adjust the game add-in mods easier)
9. Set OPTIONS in SH3 Cmdr. to your liking.
10. Setup Career & Play, via SH3 Commander

hope this helps

Screenshots attached...

[Doolar]

you mentioned STEAM. did you completely delete all the STEAM Folders including the SAVE GAME FOLDER created by your STEAM install ? It is highly recomended that you remove ALL files left over from a previous install before a new installation of OneAlex or any Super Mod installation as that goes. The pic posted was not clear enough for me to see.

[Brooksie]

Originally Posted by Doolar

you mentioned STEAM. did you completely delete all the STEAM Folders including the SAVE GAME FOLDER created by your STEAM install ? It is highly recomended that you remove ALL files left over from a previous install before a new installation of OneAlex or any Super Mod installation as that goes. The pic posted was not clear enough for me to see.

Yes, I uninstalled SH3 through Steam. Then I deleted the folder in the directory file where Steam is located. After that, I checked the documents and found no saved folders. I think that having multiple screens set up may be a part of my problem. I will try the installation of the mod again while only using one screen.

[Doolar]

after i create my save folder in DOCUMENTS. (Sorry if I didn't see if you did this or not), by first starting SH3 via the SH3.exe not Commander, yet. Exit game. now start the game via Commander (Cmdr.exe). The first thing that pops up will be a small window asking you to select your save game folder, just created for this particular install.

you hav a PM from me.

with the name of Brooksie, are you from the Maryland. That name means alot to Marylanders

[York2016]

Been trying to get back into SH3 via this mod, but i cant for the life of me get it to work. It boots up Academy just fine but both Career and Single Mission are a no go.

It crashes at 25-30% Loading Bar in Career and at 100% in Single Mission, both just go to a black screen and then CTD.
LSH 2022 doesnt seem to have this issue for me from a fresh install of it however. Doing the same for OneAlex (Plus using MultiSH3 to change its save directory and then creating the necessary files by booting via the OneAlex sh3.exe) does not seem to work by comparison.

[hauangua]

Originally Posted by York2016

Been trying to get back into SH3 via this mod, but i cant for the life of me get it to work. It boots up Academy just fine but both Career and Single Mission are a no go.

It crashes at 25-30% Loading Bar in Career and at 100% in Single Mission, both just go to a black screen and then CTD.
LSH 2022 doesnt seem to have this issue for me from a fresh install of it however. Doing the same for OneAlex (Plus using MultiSH3 to change its save directory and then creating the necessary files by booting via the OneAlex sh3.exe) does not seem to work by comparison.

Hi York2016 did you follow the installation instructions step by step? What specifications does your PC have?

[York2016]

Originally Posted by hauangua

Hi York2016 did you follow the installation instructions step by step? What specifications does your PC have?

Hello,


Yeah, i've followed the instructions and also redownloaded/reinstalled the mod just in case that the files got corrupted.
I've also tested Fifi's NYGM version and that one also works.



PC Specs:
GPU: RTX 3070 8GB
CPU: Ryzen 5800X3D
RAM: 32GB 3600Mhz CL16 DDR4

[jaxa]

Originally Posted by Doolar

Dumb questions here .... only because I really can't think of anything else and sorry about that, but did you set up a save game folder in your Doc Folder and did you point your install to it. If you did, then I don't know. I guess I would delete that save game folder and the rebuild it by ... starting SH3 via the SH3.exe in your game folder, let it run till you see the "options", and while your there set the Language to German (setting the language is NOT causing your issue, but you might as well set it while your there). Exit out. Start SH3 via the Cmdr.exe (Commander). You should get an explorer window asking you you select your install. You've rebuilt your Save Game Folder so if that was messed up, it's fixed. Make sure all your importation .exe's (SH3.exe, Cmdr.exe and JSGME.exe) are set to " Run as Administrator" and set to "Win 7 compatabilly." this is what I would try . If I was unsucessful, then I myself would start from scratch.

INSTALLATION OF ONEALEX
1. Download ONEALEX 1.xx and UnZip the SH3 Folder to your choice of location (not in Program Files).
2. Open the SH3 folder and locate these 3 executables, the SH3.exe, Cmdr.exe (located in the SH3 Commander’s English Folder) and the JSGME.exe. Change each executable, by right clicking and selecting their Properties, to WIN7 compatibly / and run as ADMIN. (this is very important)
3. Start the game via the SH3.exe, (not SH3 Commander) to set a SAVE FOLDER. (if you don’t already have a SAVE FOLDER from a previous installation, this will create one).
4. Set game OPTIONS to GERMAN LANGUAGE (or you will have no voices).
5. Exit game.
6. Add Mods you want from SH3 MODS Folder by activating them via JSGME.
7. I place a Cmdr Shortcut on my desktop, by R-click Cmdr.exe, select "PIN TO TASKBAR" or PIN TO START . (Totally Un-Necessary, I do this for my convenience, to start the game easier)
8. I place a JSGME Shortcut on my desktop, by R-click JSGME.exe, select "PIN TO TASKBAR" or PIN TO START . (Totally Un-Necessary, I do this for my convenience, to adjust the game add-in mods easier)
9. Set OPTIONS in SH3 Cmdr. to your liking.
10. Setup Career & Play, via SH3 Commander

hope this helps

Hmm, something is wrong for me
I do everything as described, can play naval school, but trying single missions or campaign I have CTD.

[JohnCarterOfMars]

I think I was getting a CTD until I reran the 4Gb patch, even though I think the SH3.exe was already patched.

Have you tried running the 4Gb patch on the exe?

[jaxa]

No, it didn't help.

[JohnCarterOfMars]

Have you tried going into Career and creating a dummy player, then exiting, then going back into the game and creating your "for real" career and see if that one loads?

Or...

Have you tried locating just the GWX version of SH3 and see if you can get that to run?

[jaxa]

It didn't help.

SH3 + GWX 3.0 works fine, single missions and career.