The Wolves of Steel: Bugs, glitches and issues thread - Page 33

Aktungbby · 01-15-20, 10:40 AM

SOJI!

vdr1981 · 01-15-20, 11:01 AM

Quote:

Originally Posted by Wolfcat

My sonarman still reports the nearest sound contact even after surfacing. Is this due to alt-tabbing?

Absolutelly...You should never alt-tab active game...

Quote:

Originally Posted by Wolfcat

I just ran into a in-game crash that I can reliably reproduce.

1. The 1st campaign: coastal
2. Once the harbor pilot is off
3. Have navigator do a dead-reckon positioning.
4. When you see the new position mark, put a supermark right next to it. The game would freeze up.

I'll try to reproduce this right away...

Quote:

Originally Posted by soji

When ordering the boat to surface or when ordering a dive the speed setting resets to zero. E.g if I'm on the surface at flank speed and order the boat to dive, when the boat switches to electric motors the speed order resets to zero so I have to give a new order again.

Are you sure that you're talking about TWoS the speed order does not reset to 0 in my game...

wien · 01-16-20, 02:49 PM

Halo friends i intal soobers meg.mode yesterday .
Everithing oke , but i dont get out of the bunker .
Dit not know how to move .
Today try wolves of steel .
Now game dont start anymore load error 5:0000065434
Anny thing i can do ?

soji · 01-19-20, 09:09 AM

Quote:

Originally Posted by vdr1981

Are you sure that you're talking about TWoS the speed order does not reset to 0 in my game...

Yep Twos latest version. Clean install of sh5 steam version. Game works perfectly apart from this.

RipTorn · 01-22-20, 02:24 PM

Operating System: Windows 10
Sh5 version 1.2 via Steam.
started a career after steam install.
download latest WOS to the install folder.
Ran as Admin. All folders have admin priv.
Followed all instructions to the letter.
Started new career and saved/reloaded at dock

I'm having a problem with advancing to the next mission after Baltic Operations. I completed both objectives and was told to dock at Kiel, which I did. I saved and reloaded as per normal.

When I tried to get a new mission, the only one on the map was still Baltic Operation.

So I exited out and went and activated the TWos mod to verify mission advancement. sure enough when I reloaded the save, it said there was a problem detected for mission advancement.

What is usually the cause of this?
Thanks in advance
RipTorn

vdr1981 · 01-23-20, 07:08 AM

Quote:

Originally Posted by RipTorn

Operating System: Windows 10
Sh5 version 1.2 via Steam.
started a career after steam install.
download latest WOS to the install folder.
Ran as Admin. All folders have admin priv.
Followed all instructions to the letter.
Started new career and saved/reloaded at dock

I'm having a problem with advancing to the next mission after Baltic Operations. I completed both objectives and was told to dock at Kiel, which I did. I saved and reloaded as per normal.

When I tried to get a new mission, the only one on the map was still Baltic Operation.

So I exited out and went and activated the TWos mod to verify mission advancement. sure enough when I reloaded the save, it said there was a problem detected for mission advancement.

What is usually the cause of this?
Thanks in advance
RipTorn

This is from included TWoS Quick Start Manual...

Quote:

- I've arrived in Kiel but I cant select Eastern British Coastal Waters objective, only Danzing objective is available?
Campaign objectives are date controlled and EBCW objective will not be available until 4th September 1939.

Make sure to read it if you want to avoid confusion. Also read the description of optional JSGME addons you use...

RipTorn · 01-24-20, 10:08 AM

Quote:

Originally Posted by vdr1981

This is from included TWoS Quick Start Manual...

Make sure to read it if you want to avoid confusion. Also read the description of optional JSGME addons you use...

ok, got it, IMO though, we need a mod to change it to go by objectives met.

Another question. I don't know how this got into the WOS install as I never added the enigma mod but I am receiving coded messages.

Generic Mod Enabler - v2.6.0.157
[C:\Steam\steamapps\common\Silent Hunter 5\TWoS_Parts]

TWoS UI cmd_Auto Target ID
TWoS Aspect Ratio Fix 21x9
TWoS Env Settings - Brighter Nights
TWoS FX_Reduc. Fires and Expl._Incr. Flooding via Zones
TWoS Harbors Chimney Smoke
TWoS Map Contact Colors
TWoS Officer Icons as Stations
TWoS Neutrals Illuminated Only_Until [Date]
TWoS Remove Map Plastic Cover
TWoS Remove Sub Flags

Aktungbby · 01-24-20, 12:30 PM

Riptorn!

some long silent runs since 2007!

vdr1981 · 01-24-20, 01:15 PM

Quote:

Originally Posted by RipTorn

ok, got it, IMO though, we need a mod to change it to go by objectives met.

That wouldn't be a good idea due to old "tonnage bar" bug. Objectives can not work that way...

Quote:

Another question. I don't know how this got into the WOS install as I never added the enigma mod but I am receiving coded messages.

Do I need to quote that Quick start manual again ?

THEBERBSTER · 01-24-20, 02:45 PM

A Warm Welcome Back To The Subsim Community > RipTorn
Subsim <> Make A Donation <> See The Benefits <> Support The Community
SH3 – 4 - 5 Tutorials > Downloads > Other Useful Information > See Links in My Signature Below

Baraa22 · 02-12-20, 01:32 PM

Hello !

When i start a mission or a camping the top left corner of the screen be balck but the menu is normal.
Please help me captains

divemonkie · 02-15-20, 06:06 PM

hello
when I select weapons officer than select para-scope far left to select ID Target clear target fire torp theirs a camera icon far right in that group.

if I click on it I get CTD. Happens every time in single mission. haven't tried it in campaign yet.

Zinmar · 02-15-20, 11:23 PM

Is there a way to stop the rocking motion when in the exterior view of our boat? I enjoy watching the boat bouncing around but not the camera doing it as well. Not sure if that is an option in the Wolves of Steel Editor.

adrians69 · 02-16-20, 06:52 AM

Quote:

Originally Posted by wien

Halo friends i intal soobers meg.mode yesterday .
Everithing oke , but i dont get out of the bunker .
Dit not know how to move .
Today try wolves of steel .
Now game dont start anymore load error 5:0000065434
Anny thing i can do ?

Before you install TWoS, uninstall everything to do with SH5 and the SH5 folder in documents and start again. Did you do this? Also are you running v1.2 of SH5 official patch?

Nhysalotep · 02-24-20, 01:16 PM

Hi, I just joined the other day as I cannot progress with the SH5 story at all, so I installed TWoS in order to improve my lacklustre experience.

Unfortunately that hasn't worked.

My speciications are as follows:
OS: Win 10 x64
CPU: i7-9750H
RAM: 32 GB
GPU: RTX 2060

Game version was DEFINITELY 1.2.0, I checked multiple times.

My install was completely fresh, I had played without mods, but no other mods have been installed other than TWoS.

Generic patcher was activated and successfully restored the snapshot, however I will note that despite the fact the game was 1.2.0 the patcher claimed that the EXE version was 00000000000000, which differs from what it wanted.
Screenshots of my SH5 Root folder and my JSGME are attatched.

Issue occurs at load of any form of save, whether new or old, campaign or mission, just as the screen goes dark when it finishes loading.

01-15-20, 10:40 AM	#481
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 27,837 Downloads: 22 Uploads: 0	welcome aboard! SOJI! __________________ "Only two things are infinite; The Universe and human squirrelyness; and I'm not too sure about the Universe"

01-16-20, 02:49 PM	#483
wien Swabbie Join Date: Jan 2017 Location: nederland Posts: 5 Downloads: 318 Uploads: 0	sh5 dont stat Halo friends i intal soobers meg.mode yesterday . Everithing oke , but i dont get out of the bunker . Dit not know how to move . Today try wolves of steel . Now game dont start anymore load error 5:0000065434 Anny thing i can do ?

01-22-20, 02:24 PM	#485
RipTorn Swabbie Join Date: Apr 2007 Location: USA New Jersey Posts: 12 Downloads: 57 Uploads: 0	Mission Advance Problem Operating System: Windows 10 Sh5 version 1.2 via Steam. started a career after steam install. download latest WOS to the install folder. Ran as Admin. All folders have admin priv. Followed all instructions to the letter. Started new career and saved/reloaded at dock I'm having a problem with advancing to the next mission after Baltic Operations. I completed both objectives and was told to dock at Kiel, which I did. I saved and reloaded as per normal. When I tried to get a new mission, the only one on the map was still Baltic Operation. So I exited out and went and activated the TWos mod to verify mission advancement. sure enough when I reloaded the save, it said there was a problem detected for mission advancement. What is usually the cause of this? Thanks in advance RipTorn

01-24-20, 12:30 PM	#488
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 27,837 Downloads: 22 Uploads: 0	Welcome aboard! & welcome back Riptorn! some long silent runs since 2007! __________________ "Only two things are infinite; The Universe and human squirrelyness; and I'm not too sure about the Universe"

01-24-20, 02:45 PM	#490
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Dibden Purlieu - Southampton Posts: 9,605 Downloads: 1123 Uploads: 0	A Warm Welcome Back To The Subsim Community > RipTorn Subsim <> Make A Donation <> See The Benefits <> Support The Community SH3 – 4 - 5 Tutorials > Downloads > Other Useful Information > See Links in My Signature Below __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

02-12-20, 01:32 PM	#491
Baraa22 Swabbie Join Date: Aug 2019 Posts: 8 Downloads: 27 Uploads: 0	A black box on the top left corner of the screen. Hello ! When i start a mission or a camping the top left corner of the screen be balck but the menu is normal. Please help me captains __________________ Wize captane

02-15-20, 06:06 PM	#492
divemonkie Medic Join Date: Aug 2018 Posts: 166 Downloads: 1031 Uploads: 0	hello when I select weapons officer than select para-scope far left to select ID Target clear target fire torp theirs a camera icon far right in that group. if I click on it I get CTD. Happens every time in single mission. haven't tried it in campaign yet.

02-15-20, 11:23 PM	#493
Zinmar Commander Join Date: Oct 2004 Location: Harrisburg, PA Posts: 304 Downloads: 276 Uploads: 0	Is there a way to stop the rocking motion when in the exterior view of our boat? I enjoy watching the boat bouncing around but not the camera doing it as well. Not sure if that is an option in the Wolves of Steel Editor.