SUBSIM Radio Room Forums


SUBSIM: The Web's #1 BBS for all submarine and naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > SHIII Mods Workshop
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 08-23-2008, 10:43 AM   #1
Redwine
Sea Lord
 
Join Date: Jan 2002
Location: San Martin de los Andes, Neuquen, , Argentina.
Posts: 1,994
Downloads: 9
Uploads: 0
Default [Help] How to enable these keyboard commands ?

Hi all... i remember i was able to use this keyboard commands in the past... i was using them to adjust the economical speed lot of time ago.

But for some of the trillion mods i am using they doesnt works any more...

Shift+G Maximum range at current speed
Ctrl+G Range to course end
G Time to course end

Any help will be welcome...
Redwine is offline   Reply With Quote
Old 08-23-2008, 05:25 PM   #2
nirwana
Sonar Guy
 
Join Date: Jun 2008
Posts: 380
Downloads: 17
Uploads: 0
Default

I just run my test gwx installation with no mods at all. Those 3 u asked for didnt work so i guess its not in gwx but another supermode. I found one page which i printed from a pdf with all new/diff key commands include those 3 but it doesnt tell me from what smod manual i printed the page. i try to find the file.

LOL i found it its a word doc:

Sheet1
RFB 1.5
New / Different key commands


Return to course Ctrl+R
Report Time to Turn Shift+G
Time to Course End G
Range to Course end Ctrl+G


Report Weather Ctrl+W


Fire Torpedo Ctrl+ Enter
Cycle Torpedo tube W
Toggle open/close torpedo tube door Q


Report nearest Visual Contact Ctrl+V
Repeat last Report Ctrl+B
Report Nearest Sound Contact Ctrl+N
Report Nearest Warship Contact Shift+N
Follow_nearest_sound_contact Ctrl+M
Follow_nearest_warship_sound_contact Shift+M


Raise / lower Radar mast (uses snorkel command) R
Snorkel depth , (comma)



Page 1
nirwana is offline   Reply With Quote
Old 08-23-2008, 06:14 PM   #3
Redwine
Sea Lord
 
Join Date: Jan 2002
Location: San Martin de los Andes, Neuquen, , Argentina.
Posts: 1,994
Downloads: 9
Uploads: 0
Default

Many thanks... that i am interesting is it:

Shift+G Maximum range at current speed

Gives you the range at present speed at zero fuel.

Nice is some body know how to enable it.
Redwine is offline   Reply With Quote
Old 08-24-2008, 01:19 PM   #4
von Zelda
Samurai Navy
 
Join Date: Jul 2006
Posts: 557
Downloads: 152
Uploads: 0
Default

Quote:
Originally Posted by nirwana
New / Different key commands

Return to course Ctrl+R
Report Time to Turn Shift+G
Time to Course End G
Range to Course end Ctrl+G

Report Weather Ctrl+W

Fire Torpedo Ctrl+ Enter
Cycle Torpedo tube W
Toggle open/close torpedo tube door Q

Report nearest Visual Contact Ctrl+V
Repeat last Report Ctrl+B
Report Nearest Sound Contact Ctrl+N
Report Nearest Warship Contact Shift+N
Follow_nearest_sound_contact Ctrl+M
Follow_nearest_warship_sound_contact Shift+M

Raise / lower Radar mast (uses snorkel command) R
Snorkel depth , (comma)
The only keystroke from the above list that works with GWX is "Report Weather" and I believe it was from the stock SH3.

I have made a mini-mod for myself that adds keystrokes for the following:

Time Compression Increase, Decrease and Normal (needed since I use a laptop)
ID Target and Solution to Target
Report Nearest Visual Target
Return to Course
Get Depth Under Keel
Got to Conning Tower View
Man the Flak Guns and Fire AA Guns at Will
Man the Deck Gun
Man the Watch Crew
Propulsion Recharge
Propulsion Standard

If anyone wants a copy of my Commands_en file and directions, please send me a personal message with your email address.
von Zelda is offline   Reply With Quote
Old 08-24-2008, 02:32 PM   #5
Redwine
Sea Lord
 
Join Date: Jan 2002
Location: San Martin de los Andes, Neuquen, , Argentina.
Posts: 1,994
Downloads: 9
Uploads: 0
Default

Quote:
Originally Posted by von Zelda
The only keystroke from the above list that works with GWX is "Report Weather" and I believe it was from the stock SH3.

I have made a mini-mod for myself that adds keystrokes for the following:

Time Compression Increase, Decrease and Normal (needed since I use a laptop)
ID Target and Solution to Target
Report Nearest Visual Target
Return to Course
Get Depth Under Keel
Got to Conning Tower View
Man the Flak Guns and Fire AA Guns at Will
Man the Deck Gun
Man the Watch Crew
Propulsion Recharge
Propulsion Standard

If anyone wants a copy of my Commands_en file and directions, please send me a personal message with your email address.
Many thanks von Zelda...

Do you know how to recover this command ?

Shift+G Maximum range at current speed

Thanks in advance !
Redwine is offline   Reply With Quote
Old 08-24-2008, 04:35 PM   #6
von Zelda
Samurai Navy
 
Join Date: Jul 2006
Posts: 557
Downloads: 152
Uploads: 0
Default

Quote:
Originally Posted by Redwine
Do you know how to recover this command ?

Shift+G Maximum range at current speed
I looked but I could not find the commands for Maximum Range at Current Speed, Distance to End or Time to End. I guess we'll have to continue to point and click with the mouse on these.

Note: On my above post regarding my Setkey Mini-mod, the 'mouse wheel' will also rotate the hydrophone, the sonar and the radar at the appropriate station.
von Zelda is offline   Reply With Quote
Old 08-24-2008, 05:11 PM   #7
Redwine
Sea Lord
 
Join Date: Jan 2002
Location: San Martin de los Andes, Neuquen, , Argentina.
Posts: 1,994
Downloads: 9
Uploads: 0
Default

Quote:
Originally Posted by von Zelda
Quote:
Originally Posted by Redwine
Do you know how to recover this command ?

Shift+G Maximum range at current speed
I looked but I could not find the commands for Maximum Range at Current Speed, Distance to End or Time to End. I guess we'll have to continue to point and click with the mouse on these.
It is from an old mod, but i cant remember, but i am sure i was using it lot of time ago, when i made an adjust of the sub speeds to mach the most economical speed at the Ahead Standard.

Quote:
Originally Posted by von Zelda
Note: On my above post regarding my Setkey Mini-mod, the 'mouse wheel' will also rotate the hydrophone, the sonar and the radar at the appropriate station.
So good !
Redwine is offline   Reply With Quote
Old 08-24-2008, 06:02 PM   #8
von Zelda
Samurai Navy
 
Join Date: Jul 2006
Posts: 557
Downloads: 152
Uploads: 0
Default UPDATE to my Setkey mini-mod

Quote:
Originally Posted by von Zelda
Quote:
Originally Posted by Redwine
Do you know how to recover this command ?

Shift+G Maximum range at current speed
I looked but I could not find the commands for Maximum Range at Current Speed, Distance to End or Time to End. I guess we'll have to continue to point and click with the mouse on these.
I have now been able to add Maximum Range at Current Speed, Range to Course End and Time to Course End, as well as Search Pattern 1 to my mini-mod.

Send me a Private Message if you want a copy of my Commands_en v3 and include your email address.

Last edited by von Zelda; 08-24-2008 at 06:19 PM.
von Zelda is offline   Reply With Quote
Old 08-24-2008, 07:41 PM   #9
Redwine
Sea Lord
 
Join Date: Jan 2002
Location: San Martin de los Andes, Neuquen, , Argentina.
Posts: 1,994
Downloads: 9
Uploads: 0
Default

Quote:
Originally Posted by von Zelda
Quote:
Originally Posted by von Zelda
Quote:
Originally Posted by Redwine
Do you know how to recover this command ?

Shift+G Maximum range at current speed
I looked but I could not find the commands for Maximum Range at Current Speed, Distance to End or Time to End. I guess we'll have to continue to point and click with the mouse on these.
I have now been able to add Maximum Range at Current Speed, Range to Course End and Time to Course End, as well as Search Pattern 1 to my mini-mod.

Send me a Private Message if you want a copy of my Commands_en v3 and include your email address.
Done...

Many thanks... !
Redwine is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:07 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright © 1995- 2019 Subsim