Anvart's GWX_DFa-Flag & Pens_2010 mod

John Pancoast · 10-25-19, 10:02 PM

With Anvart's GWX_DFa-Flag&Pens_2010 mod, do you have to open the .eqp files to get the pennants to display on the boat in the harbor, or just follow the readme instructions key commands once in the harbor ?

In the readme, it states "Two files (Pennants.jpg, ListOfPens.jpg) with the image of pennants and with the list of pennants, which you can write down in file "..\data\Submarine\NSS_Uboat$$\NSS_Uboat$$.eqp " after each patrol (as sunk tonnage), are presented."

I'm confused by the meaning of this statement; it says *after* the patrol........and if opening the .eqp files are needed, what program does that ?

mikey117us · 10-25-19, 11:31 PM

You enable it last through JSGME the mod should
Have a data folder with animations, library, and objects. A commands file .etc Shift F raises the flag
CTRL F lowers it. Pennants raise by CTRL Page Uo
and only display within 500 meters of Port ie begin
A patrol, make it all the way back to dock. Equipment files should all be in the mod no editing
Is required. It only works with the U-Boats in GWX 3.0
RDF antenna is raised by shift v. When a dive command is given the flag automatically lowers, and the antenna as well.

Anvar1061 · 10-26-19, 03:48 AM

At the end of your campaign, you can independently create a set of pennants that you want to hang on the basis of the previous military campaign. To do this, you must edit your .eqp file according to List of Pennants

Number and set of pennants according to your merits. But not more than a doz. (12).
Hardly enough torpedoes for you more.
If you want to.

John Pancoast · 10-26-19, 06:10 AM

Quote:

Originally Posted by mikey117us

You enable it last through JSGME the mod should
Have a data folder with animations, library, and objects. A commands file .etc Shift F raises the flag
CTRL F lowers it. Pennants raise by CTRL Page Uo
and only display within 500 meters of Port ie begin
A patrol, make it all the way back to dock. Equipment files should all be in the mod no editing
Is required. It only works with the U-Boats in GWX 3.0
RDF antenna is raised by shift v. When a dive command is given the flag automatically lowers, and the antenna as well.

Thanks, I've done all that and the flag/rdf work good. Just wasn't sure if something else had to be done for the pennants.

When you enable the pennants coming into port, are they generic or does each one have the correct info. on it from what you actually sank ?

John Pancoast · 10-26-19, 06:13 AM

Quote:

Originally Posted by Anvar1061

At the end of your campaign, you can independently create a set of pennants that you want to hang on the basis of the previous military campaign. To do this, you must edit your .eqp file according to List of Pennants

Number and set of pennants according to your merits. But not more than a doz. (12).
Hardly enough torpedoes for you more.
If you want to.

Ok, I see. Since it's campaign end, would these still show up on the sub somehow ? Or is the process;

- save close to port after a patrol.

- edit the .eqp files with what you sunk.

- reload the game, go to port and the flags are displayed with the correct info. on what you sunk.

Is that it ?

And what can be used to open the .eqp files ? S3d doesn't do it for me anyway.

Thanks for the replies guys.

Anvar1061 · 10-26-19, 06:41 AM

Quote:

Originally Posted by John Pancoast

And what can be used to open the .eqp files ? S3d doesn't do it for me anyway.

.cfg .eqp .sns ...
Notepad

John Pancoast · 10-26-19, 08:03 AM

Quote:

Originally Posted by Anvar1061

.cfg .eqp .sns ...
Notepad

Strange; notepad isn't doing it either. First thing I tried. I'll keep messing with it.

John Pancoast · 10-26-19, 08:37 AM

Got notepad working now, not sure why it didn't before.

Thanks again guys ! Great mod.

Anvar1061 · 10-26-19, 09:45 AM

Quote:

Originally Posted by John Pancoast

Got notepad working now, not sure why it didn't before.

It is necessary to change the gasket on the computer.

John Pancoast · 10-26-19, 10:14 AM

Quote:

Originally Posted by Anvar1061

It is necessary to change the gasket on the computer.

Bigger hammer <g>

John Pancoast · 10-27-19, 04:34 PM

Can't get the pennants to show.

- sunk four ships.

- in port, just outside the pens. WO is not searching; binos are down.

- mod is installed via JSGME.

- everything works; flag, DF antenna, attack scope goes up/down, just no pennants showing.

- via google thread, I verified the commands file is ok too (as above anyway, all commands work, just no pennants showing.

- I do have Hsie's supplement folder installed after this mod, but it only has an Type VIIf in it. I assume it's the ai sub for the wolfpack mod ?
I'm in a VIIB.

Any hints ? Sub is sitting outside pen still.

FUBAR295 · 10-27-19, 05:13 PM

John,

I guess you are doing this on a NYGM install, correct? I had the same problem long ago and spent many hours attempting to get the pennants to work, no joy. It works just fine in GWX and WAC5 installs.

I gave up and just did without. There is just something in NYGM not enabling it to work. It is just eye candy anyway and that is why I spend my time playing NYGM mostly.

If I get a hankering for bright shiny objects with whistles and bells then I play one of the others.

Know it is not much help.

Godd hunting,
FUBAR295

John Pancoast · 10-27-19, 05:49 PM

Quote:

Originally Posted by FUBAR295

John,

I guess you are doing this on a NYGM install, correct? I had the same problem long ago and spent many hours attempting to get the pennants to work, no joy. It works just fine in GWX and WAC5 installs.

I gave up and just did without. There is just something in NYGM not enabling it to work. It is just eye candy anyway and that is why I spend my time playing NYGM mostly.

If I get a hankering for bright shiny objects with whistles and bells then I play one of the others.

Know it is not much help.

Godd hunting,
FUBAR295

Actually this is on my GWX 3 install. But thanks for the reply anyway !

John Pancoast · 10-27-19, 06:48 PM

Quote:

Originally Posted by FUBAR295

John,

I guess you are doing this on a NYGM install, correct? I had the same problem long ago and spent many hours attempting to get the pennants to work, no joy. It works just fine in GWX and WAC5 installs.

I gave up and just did without. There is just something in NYGM not enabling it to work. It is just eye candy anyway and that is why I spend my time playing NYGM mostly.

If I get a hankering for bright shiny objects with whistles and bells then I play one of the others.

Know it is not much help.

Godd hunting,
FUBAR295

Btw, to get the pennants, do you just raise the scope within range of the harbor ?

Also, I bet if you import the GWX subs/turms into NYGM the mod would work.

John Pancoast · 10-27-19, 07:06 PM

Well, I docked and started the next patrol. Pennants show up now when I'm leaving the pen.

Strange. Guess it'll work now though at the end of the patrol too. All the pennants are showing too; no way to make it so it represents just the ones you sunk ?

10-25-19, 10:02 PM	#1
John Pancoast Ocean Warrior Join Date: Apr 2002 Location: Minnysoda Posts: 3,174 Downloads: 490 Uploads: 4	Anvart's GWX_DFa-Flag & Pens_2010 mod With Anvart's GWX_DFa-Flag&Pens_2010 mod, do you have to open the .eqp files to get the pennants to display on the boat in the harbor, or just follow the readme instructions key commands once in the harbor ? In the readme, it states "Two files (Pennants.jpg, ListOfPens.jpg) with the image of pennants and with the list of pennants, which you can write down in file "..\data\Submarine\NSS_Uboat$$\NSS_Uboat$$.eqp " after each patrol (as sunk tonnage), are presented." I'm confused by the meaning of this statement; it says after the patrol........and if opening the .eqp files are needed, what program does that ? __________________ "Realistic" is not always GAME-GOOD." - Wave Skipper

10-26-19, 03:48 AM	#3
Anvar1061 Ocean Warrior Join Date: May 2012 Location: In the sea, on land and above Posts: 3,344 Downloads: 846 Uploads: 0	At the end of your campaign, you can independently create a set of pennants that you want to hang on the basis of the previous military campaign. To do this, you must edit your .eqp file according to List of Pennants ;Pennant 1 [Equipment ] NodeName=F03 LinkName=cargo_13850 StartDate=19380101 EndDate=19451231 ;Pennant 2 [Equipment ] NodeName=F04 LinkName=cargo_8000 StartDate=19380101 EndDate=19451231 ;Pennant 3 [Equipment ] NodeName=F05 LinkName=cargo_2920 StartDate=19380101 EndDate=19451231 ;Pennant 4 [Equipment ] NodeName=F06 LinkName=cargo_2150 StartDate=19380101 EndDate=19451231 ;Pennant 5 [Equipment ] NodeName=F07 LinkName=cargo_1100 StartDate=19380101 EndDate=19451231 ;Pennant 6 [Equipment ] NodeName=F08 LinkName=war_Plane StartDate=19380101 EndDate=19451231 ;Pennant 7 [Equipment *] NodeName=F09 LinkName=cargo_6850 StartDate=19380101 EndDate=19451231 Etc. Number and set of pennants according to your merits. But not more than a doz. (12). Hardly enough torpedoes for you more. If you want to. __________________ Last edited by Anvar1061; 10-26-19 at 04:03 AM.*

10-26-19, 08:37 AM	#8
John Pancoast Ocean Warrior Join Date: Apr 2002 Location: Minnysoda Posts: 3,174 Downloads: 490 Uploads: 4	Got notepad working now, not sure why it didn't before. Thanks again guys ! Great mod. __________________ "Realistic" is not always GAME-GOOD." - Wave Skipper

10-27-19, 04:34 PM	#11
John Pancoast Ocean Warrior Join Date: Apr 2002 Location: Minnysoda Posts: 3,174 Downloads: 490 Uploads: 4	Can't get the pennants to show. - sunk four ships. - in port, just outside the pens. WO is not searching; binos are down. - mod is installed via JSGME. - everything works; flag, DF antenna, attack scope goes up/down, just no pennants showing. - via google thread, I verified the commands file is ok too (as above anyway, all commands work, just no pennants showing. - I do have Hsie's supplement folder installed after this mod, but it only has an Type VIIf in it. I assume it's the ai sub for the wolfpack mod ? I'm in a VIIB. Any hints ? Sub is sitting outside pen still. __________________ "Realistic" is not always GAME-GOOD." - Wave Skipper

10-27-19, 05:13 PM	#12
FUBAR295 Krusty Krab Join Date: Mar 2002 Location: Decks awash in the North Atlantic Posts: 1,270 Downloads: 439 Uploads: 0	John, I guess you are doing this on a NYGM install, correct? I had the same problem long ago and spent many hours attempting to get the pennants to work, no joy. It works just fine in GWX and WAC5 installs. I gave up and just did without. There is just something in NYGM not enabling it to work. It is just eye candy anyway and that is why I spend my time playing NYGM mostly. If I get a hankering for bright shiny objects with whistles and bells then I play one of the others. Know it is not much help. Godd hunting, FUBAR295 __________________ Good judgment comes from experience. Unfortunately, the experience usually comes from bad judgment.

10-25-19, 11:31 PM	#2
mikey117us Engineer Join Date: Mar 2012 Location: Kalifornia Posts: 211 Downloads: 162 Uploads: 0	You enable it last through JSGME the mod should Have a data folder with animations, library, and objects. A commands file .etc Shift F raises the flag CTRL F lowers it. Pennants raise by CTRL Page Uo and only display within 500 meters of Port ie begin A patrol, make it all the way back to dock. Equipment files should all be in the mod no editing Is required. It only works with the U-Boats in GWX 3.0 RDF antenna is raised by shift v. When a dive command is given the flag automatically lowers, and the antenna as well.

10-27-19, 07:06 PM	#15
John Pancoast Ocean Warrior Join Date: Apr 2002 Location: Minnysoda Posts: 3,174 Downloads: 490 Uploads: 4	Well, I docked and started the next patrol. Pennants show up now when I'm leaving the pen. Strange. Guess it'll work now though at the end of the patrol too. All the pennants are showing too; no way to make it so it represents just the ones you sunk ? __________________ "Realistic" is not always GAME-GOOD." - Wave Skipper