SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > Silent Hunter 5
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 04-14-21, 10:59 PM   #1
Compans57
Officer
 
Join Date: Apr 2020
Posts: 236
Downloads: 71
Uploads: 0
Default Help with RAOBF dis. My measurements are off.

I'm using real navigation and trying to get a handle on the RAOBF disc, but my findings are consistently about 1500m to 2000m off. I've followed video and pictorial tutorials so I can't figure out what I'm doing wrong.

For example, I had a Nelson class battleship at 2 optics mast height. Actual mast height is 55m. This reads off as (IIRC) 8500m but (I'm testing results with map icons) when I use the map ruler the actual range is around 7000m.

Are there different optic graphics? I realize that optic height can be out due to waterline but not this much.

Anyone have any solutions?
Compans57 is offline   Reply With Quote
Old 04-15-21, 08:40 AM   #2
3catcircus
Grey Wolf
 
Join Date: Sep 2011
Posts: 951
Downloads: 241
Uploads: 0
Default

The difficulty is in the fact that the graticules are not centered, which makes it very difficult to confirm the actual number of ticks. You might be at 2.2, or 1.9, or some other not exactly 2.

I'd work backwards. Get range on the map, dial it in to the mast height, and see how many ticks are shown at the hash mark. If it is slightly different than the 2 you've indicated, then you're just not being precise enough. If it is vastly different, it could be that you need to select a different multiplier or hash position on the disk for the magnification you are using.

That having been said, I've not seen *any* correct implementation of the RAOBF beyond karamazov's initial implementation up to and including Makman's. Everything after that seems to be off.

I've had problems moreso with determining AOB - the value dialed in and known to be good because I checked before hand with the map tools, doesn't match the value that shows up in the scratchpad.
3catcircus is offline   Reply With Quote
Old 04-15-21, 10:11 AM   #3
Compans57
Officer
 
Join Date: Apr 2020
Posts: 236
Downloads: 71
Uploads: 0
Default

Quote:
Originally Posted by 3catcircus View Post
The difficulty is in the fact that the graticules are not centered, which makes it very difficult to confirm the actual number of ticks. You might be at 2.2, or 1.9, or some other not exactly 2.

I'd work backwards. Get range on the map, dial it in to the mast height, and see how many ticks are shown at the hash mark. If it is slightly different than the 2 you've indicated, then you're just not being precise enough. If it is vastly different, it could be that you need to select a different multiplier or hash position on the disk for the magnification you are using.

That having been said, I've not seen *any* correct implementation of the RAOBF beyond karamazov's initial implementation up to and including Makman's. Everything after that seems to be off.

I've had problems moreso with determining AOB - the value dialed in and known to be good because I checked before hand with the map tools, doesn't match the value that shows up in the scratchpad.
Thanks mate. Could it be the magnification on the attack periscope? I seem to just have two magnifications - zoom in and out. I'm not sure of the power of this, ie 6X or 1.5 but I imagine that would affect things.
Compans57 is offline   Reply With Quote
Old 04-15-21, 02:41 PM   #4
Compans57
Officer
 
Join Date: Apr 2020
Posts: 236
Downloads: 71
Uploads: 0
Default

Following your advice I find that if the contact is far off and fairly small in the scope, an addition of .5 of an optic height works. If the target is large in the scope an addition of 1 optic works.

For example: if the optic height in the scope is 2.5 and the ship is far away, I make the reading 3. This however is incredibly unscientific. Do other people have these problems? Range is not too important as regards torpedoes unless the range is beyond the capabilities of the torpedo. It's quite another matter with fats, as setting when the leg starts is vital.

Mt stadimeter readings seem way off as well.

Another question is when measuring mast height with ships that have a mast coming from the bridge, do you take this mast as the measurement or one of the ones on deck?
Compans57 is offline   Reply With Quote
Old 04-15-21, 06:05 PM   #5
3catcircus
Grey Wolf
 
Join Date: Sep 2011
Posts: 951
Downloads: 241
Uploads: 0
Default

Typically the intent is to measure from waterline to the tallest mast.

Although range isn't that vital, a good range is needed to then determine AOB using the RAOBF.

Last edited by 3catcircus; 04-15-21 at 07:40 PM.
3catcircus is offline   Reply With Quote
Old 04-16-21, 06:03 AM   #6
bstanko6
Admiral
 
Join Date: Feb 2015
Location: Murwik Naval Academy
Posts: 2,122
Downloads: 390
Uploads: 13


Default

I never zoom in when calculating with RAOBF. There are tick marks that allow you to use the zoom, but it complicates things.
__________________
[SIGPIC][/SIGPIC]
BSTANKO6'S SH5 NAVAL ACADEMY
http://www.youtube.com/channel/UCPbe...W2NArCA/videos

DISCORD
https://discord.gg/6tFeTSUmVc
bstanko6 is offline   Reply With Quote
Old 04-16-21, 06:54 AM   #7
3catcircus
Grey Wolf
 
Join Date: Sep 2011
Posts: 951
Downloads: 241
Uploads: 0
Default

Quote:
Originally Posted by bstanko6 View Post
I never zoom in when calculating with RAOBF. There are tick marks that allow you to use the zoom, but it complicates things.
The problem is, for us old guys, the Mark 1 Eyeball has some difficulty with the 1.5x in seeing sufficient detail.

For me, it would be a lot easier (in any of them: SH3, SH4, and SH5) to have the graticules centered rather than offset - most mods don't allow you to move the scope or the raobf dial while paused to get an accurate count of the tick marks, so if stabilization isn't on, it becomes very difficult - almost to the point that guesstimating based upon image size and experience is just as accurate.
3catcircus is offline   Reply With Quote
Old 04-16-21, 08:30 AM   #8
Compans57
Officer
 
Join Date: Apr 2020
Posts: 236
Downloads: 71
Uploads: 0
Default

The thing is, from the video tutorials I’ve watched I assumed they were zoomed in too. Otherwise you’re limited to finding range when the contact is right on top of you. I prefer to attack from very long range, especially after 1942 when the escort presence is heavy - 8k to 10k.
Compans57 is offline   Reply With Quote
Old 04-16-21, 09:06 AM   #9
3catcircus
Grey Wolf
 
Join Date: Sep 2011
Posts: 951
Downloads: 241
Uploads: 0
Default

Quote:
Originally Posted by Compans57 View Post
The thing is, from the video tutorials I’ve watched I assumed they were zoomed in too. Otherwise you’re limited to finding range when the contact is right on top of you. I prefer to attack from very long range, especially after 1942 when the escort presence is heavy - 8k to 10k.
It doesn't even need to be very long range. The images size is tiny up until you're just under 5,000 m or so. At that point you really have no ability to maneuver since you should be submerged already.
3catcircus is offline   Reply With Quote
Old 04-24-21, 09:29 AM   #10
Compans57
Officer
 
Join Date: Apr 2020
Posts: 236
Downloads: 71
Uploads: 0
Default

I've been continuing to investigate this and it doesn't make much sense. My question is have other people checked the measurements on RAOBF with the map tools? Why are my findings so off? I've double, and triple checked everything.

I've found that if the target is fairly close, I can get accurate results if I subtract 500 metres. ie - 2500 metres on the RAOBF is actually 2000 metres. But at longer ranges it gets completely out of whack. 2000 metres and more off.

Could mast heights be wrong, either in the 3D models or documentation in SOANS?

I'm genuinely interested to see if others have tested this.
Compans57 is offline   Reply With Quote
Old 04-24-21, 11:47 AM   #11
derstosstrupp
Grey Wolf
 
derstosstrupp's Avatar
 
Join Date: Aug 2008
Posts: 879
Downloads: 489
Uploads: 0


Default

Quote:
Originally Posted by Compans57 View Post
I've been continuing to investigate this and it doesn't make much sense. My question is have other people checked the measurements on RAOBF with the map tools? Why are my findings so off? I've double, and triple checked everything.

I've found that if the target is fairly close, I can get accurate results if I subtract 500 metres. ie - 2500 metres on the RAOBF is actually 2000 metres. But at longer ranges it gets completely out of whack. 2000 metres and more off.

Could mast heights be wrong, either in the 3D models or documentation in SOANS?

I'm genuinely interested to see if others have tested this.
Please post some screenshots with information on the ship in the scope, and then we can get to the bottom of this.

In the meantime though, I only use the centiradian marks in the scope, because I normally shoot at such low gyro angles that range doesn’t matter. I would suggest you do the same. RAOBF is a handy tool, but there was a reason why they dispensed with it (as well as the split-prism stadimeter) on scopes after 1939 (namely on the C/2 Stand-Sehrohr attack scope you see in game in the tower), because mast heights were seldom known or relied on, nor was that information really needed when in practice they minimized their gyro angles making range have no impact on the lead angle.
__________________
Ask me anything about the Type VII or IX!

One-Stop Targeting Shop:
https://drive.google.com/drive/folde...WwBt-1vjW28JbO
My YT Channel:
https://www.youtube.com/channel/UCIJ...9FXbD3S2kgwdPQ
derstosstrupp is offline   Reply With Quote
Old 04-24-21, 06:53 PM   #12
Compans57
Officer
 
Join Date: Apr 2020
Posts: 236
Downloads: 71
Uploads: 0
Default

Quote:
Originally Posted by derstosstrupp View Post
Please post some screenshots with information on the ship in the scope, and then we can get to the bottom of this.

In the meantime though, I only use the centiradian marks in the scope, because I normally shoot at such low gyro angles that range doesn’t matter. I would suggest you do the same. RAOBF is a handy tool, but there was a reason why they dispensed with it (as well as the split-prism stadimeter) on scopes after 1939 (namely on the C/2 Stand-Sehrohr attack scope you see in game in the tower), because mast heights were seldom known or relied on, nor was that information really needed when in practice they minimized their gyro angles making range have no impact on the lead angle.
Thanks I’ll take some shots. I agree with gyro angles and I use fixed wire attack. The thing is it does matter with fat torps. Also, other than using WEPS or Obs officer, there is no way of getting range during pursuit phase or when spotting a ship in the distance.
Compans57 is offline   Reply With Quote
Old 04-24-21, 11:04 PM   #13
les green01
Seasoned Skipper
 
les green01's Avatar
 
Join Date: Jan 2002
Location: Freeman Missouri
Posts: 1,735
Downloads: 1375
Uploads: 0
Default

range even with fat was a estimate unless they was using radar longer the range less loops it will make and the newest TWoS update you can't preheat the g7e so the range is even shorten
__________________
I'll tell you what bravery really is. Bravery is just determination to do a job that you know has to be done.
Audie Murphy
les green01 is offline   Reply With Quote
Old 04-26-21, 12:13 AM   #14
Compans57
Officer
 
Join Date: Apr 2020
Posts: 236
Downloads: 71
Uploads: 0
Default

Quote:
Originally Posted by les green01 View Post
range even with fat was a estimate unless they was using radar longer the range less loops it will make and the newest TWoS update you can't preheat the g7e so the range is even shorten
The problem is with sticking to strict historical comparisons is that this is a game. It's very hard to tell sometimes in SH5, which ship is in front of the other for example. As we don't have any peripheral vision (which is essential for judging far away objects) in the game we're forced to compromise.
Compans57 is offline   Reply With Quote
Old 08-29-21, 12:58 PM   #15
Able72
Captain
 
Able72's Avatar
 
Join Date: Mar 2008
Location: Somewhere in the North Atlantic
Posts: 338
Downloads: 299
Uploads: 0
Default

Quote:
Originally Posted by Compans57 View Post
I'm using real navigation and trying to get a handle on the RAOBF disc, but my findings are consistently about 1500m to 2000m off. I've followed video and pictorial tutorials so I can't figure out what I'm doing wrong.

For example, I had a Nelson class battleship at 2 optics mast height. Actual mast height is 55m. This reads off as (IIRC) 8500m but (I'm testing results with map icons) when I use the map ruler the actual range is around 7000m.

Are there different optic graphics? I realize that optic height can be out due to waterline but not this much.

Anyone have any solutions?

I'm having the same issue, but worse. Even paused and counting tick marks comparing it to the map distance, I'm coming up sometimes more than 1100m off of range. This makes AOB using the RAOBF way off. I remember using the original RAOBF with SH3 and it was a fantastically accurate tool. Perhaps, just my thoughts, we need to have someone take the time to rescale the reticle markers and replace the default ones in TWOS. Perhaps over time the scale has gotten off and a correction is needed.
__________________
"Some ships are designed to sink, others require our assistance." Nathan Zelk
Able72 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:40 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1995- 2024 Subsim®
"Subsim" is a registered trademark, all rights reserved.