Mods conflict...?

CapZap1970 · 06-30-20, 12:29 AM

I would like to use the NVDrifter Longer Wakes for GWX V1.0 mod, but I see that it uses the .VAL files of every ship in the Sea folder, same ones that use Rubini - Lifeboats & Debirs V4.

Now, the question is: are these 2 mods incompatible beacuase of this or is it possible to use both mods without one breaking the other? if they are incompatible, is the a way to make them compatible or is there another mod similar to NVDrifetr's one that can be used in conjunction with Rubini's? The truth is that I found NVDrifter's mod in a very old disk and maybe it's outdated and other versions were made in the following years after this one.

Any comments will be most welcome. Thanks a lot guys!!

CapZap

Fifi · 06-30-20, 12:53 AM

To see if they are compatible, only way is to open both .VAL files using S3D and compare...
Never used any of them so can’t tell. But I suspect Rubini use .VAL to make life boats appearing for each ships while the NVDrifter use .VAL for each ships to behave the new waves…
It’s only hypothesis from me so take it with care

Anyway you’ll have to add the Right values from one to the other To make it fully compatible

CapZap1970 · 06-30-20, 01:01 AM

Quote:

Originally Posted by Fifi

To see if they are compatible, only way is to open both .VAL files using S3D and compare...
Never used any of them so can’t tell. But I suspect Rubini use .VAL to make life boats appearing for each ships while the NVDrifter use .VAL for each ships to behave the new waves…
It’s only hypothesis from me so take it with care

Anyway you’ll have to add the Right values from one to the other To make it fully compatible

There is a big problem for me, since I was never able to istall S3D... for a reason unknown I get an error msg everytime I try... downloaded both progs required by S3D to run and still get the same error msg, so I gave up using S3D...

Fifi · 06-30-20, 01:17 AM

That’s a major problem if you want to mod ... S3D is THE application for modding!
I too can’t run it on my new rig...have to switch each time on my old one to use S3D...a real pain.
I know some stuff are missing on my new rig to run S3D, but as i don’t want it to connect internet, it’s like that!

CapZap1970 · 06-30-20, 01:21 AM

Quote:

Originally Posted by Fifi

That’s a major problem if you want to mod ... S3D is THE application for modding!
I too can’t run it on my new rig...have to switch each time on my old one to use S3D...a real pain.
I know some stuff are missing on my new rig to run S3D, but as i don’t want it to connect internet, it’s like that!

Then it is something with Win 10 that causes those problems... wish I could find out how to solve the problem...

Fifi · 06-30-20, 01:34 AM

About your PM, give me half an hour or so and I’ll send you what you are looking for

(Via PM)

CapZap1970 · 06-30-20, 01:35 AM

Quote:

Originally Posted by Fifi

About your PM, give me half an hour or so and I’ll send you what you are looking for

(Via PM)

don't worry, there is no rush... forgot to tell you i am a GWX player..

Fifi · 06-30-20, 01:38 AM

Quote:

Originally Posted by CapZap1970

don't worry, there is no rush... forgot to tell you i am a GWX player..

Yes, it will be all needed for GWX in only 1 mod

Only for GWX! (Ie For NYGM it can’t work)

Fifi · 06-30-20, 01:50 AM

PM sent

RickSarg · 06-30-20, 03:37 AM

Quote:

Originally Posted by CapZap1970

Then it is something with Win 10 that causes those problems... wish I could find out how to solve the problem...

S3D Editor works fine on my Windows 10

Rick

Fifi · 06-30-20, 04:20 AM

Quote:

Originally Posted by RickSarg

S3D Editor works fine on my Windows 10

Rick

Yes it’s running fine on Win10 of my old rig, but can’t remember what files my new rig is missing to make it run...have to check again closer when some free time.

Anvar1061 · 06-30-20, 09:02 AM

Quote:

Originally Posted by Fifi

Yes it’s running fine on Win10 of my old rig, but can’t remember what files my new rig is missing to make it run...have to check again closer when some free time.

Microsoft NET Framework 2.0

Fifi · 06-30-20, 12:32 PM

Quote:

Originally Posted by Anvar1061

Microsoft NET Framework 2.0

Yes, it’s a possible miss on my new rig, I’ll check that thanks mate

Fifi · 07-01-20, 02:34 AM

Quote:

Originally Posted by Anvar1061

Microsoft NET Framework 2.0

COOOOOL

Had to download and install NET FRAMEWORK 3.5 + update my directX9 and my S3D is finally running fine on new computer!

Thanks a lot Anvar

Anvar1061 · 07-01-20, 05:00 AM

Quote:

Originally Posted by Fifi

COOOOOL
Thanks a lot Anvar1061

06-30-20, 12:29 AM	#1
CapZap1970 Sea Lord Join Date: Mar 2007 Location: La Paz, Bolivia Posts: 1,956 Downloads: 259 Uploads: 51	Mods conflict...? I would like to use the NVDrifter Longer Wakes for GWX V1.0 mod, but I see that it uses the .VAL files of every ship in the Sea folder, same ones that use Rubini - Lifeboats & Debirs V4. Now, the question is: are these 2 mods incompatible beacuase of this or is it possible to use both mods without one breaking the other? if they are incompatible, is the a way to make them compatible or is there another mod similar to NVDrifetr's one that can be used in conjunction with Rubini's? The truth is that I found NVDrifter's mod in a very old disk and maybe it's outdated and other versions were made in the following years after this one. Any comments will be most welcome. Thanks a lot guys!! CapZap __________________

06-30-20, 12:53 AM	#2
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 5,717 Downloads: 452 Uploads: 0	To see if they are compatible, only way is to open both .VAL files using S3D and compare... Never used any of them so can’t tell. But I suspect Rubini use .VAL to make life boats appearing for each ships while the NVDrifter use .VAL for each ships to behave the new waves… It’s only hypothesis from me so take it with care Anyway you’ll have to add the Right values from one to the other To make it fully compatible __________________ https://www.mediafire.com/file/oirl8...ION_V5.7z/file

06-30-20, 01:17 AM	#4
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 5,717 Downloads: 452 Uploads: 0	That’s a major problem if you want to mod ... S3D is THE application for modding! I too can’t run it on my new rig...have to switch each time on my old one to use S3D...a real pain. I know some stuff are missing on my new rig to run S3D, but as i don’t want it to connect internet, it’s like that! __________________ https://www.mediafire.com/file/oirl8...ION_V5.7z/file

06-30-20, 01:34 AM	#6
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 5,717 Downloads: 452 Uploads: 0	About your PM, give me half an hour or so and I’ll send you what you are looking for (Via PM) __________________ https://www.mediafire.com/file/oirl8...ION_V5.7z/file

06-30-20, 01:50 AM	#9
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 5,717 Downloads: 452 Uploads: 0	PM sent __________________ https://www.mediafire.com/file/oirl8...ION_V5.7z/file

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode