[REL] TriRingsCompass and Other Combine Version - Page 2

ottos · 03-20-10, 08:23 AM

Quote:

Originally Posted by wildcards

Great looking compass you crafted Ottos, thanks for sharing.

Would it be possible to thinker this great looking compass to show up with out any of the radio buttons (radio function disabled)

I see no need for the radio, but do however for this big compass.

Hi wildcards, sorry to rate for reply.

this is a quite rough method...
open data\menu\pages\Page UserRadio.ini with notepad.

from [G2C I3] to [G2C I11]
change value of Materials to ZERO, Materials=x -> Materials=0
and add comment out. ToolTipText=5854 -> ;ToolTipText=5854

!!! If you do this, you cant operate UserRadio perfectly, ok?!!!

p.s.
I am trying to improve in standalone and slide out version with script,
but I dont know I can do...

wildcards · 03-22-10, 09:59 AM

Thanks Ottos, I'll tweak my code when I get home and give it a test spin.

ottos · 03-22-10, 10:17 PM

SlideOUT and Stand Alone version is OUT
　
　- SlideOut/ SlideIn from Left Top edge of game screen.
　- remove from UserRadio Page.
　- Add CheckBox to stay on the game screen

ottos · 03-25-10, 11:40 AM

-Notice-
Corresponding　to "NewUIs_TDC_1_0_0_ByTheDarkWraith", I have replaced exec file. 3in1_vol2-> 3in1_vol3.

old one makes CTD under "NewUIs_TDC_1_0_0_ByTheDarkWraith" circumustace,
because I did not consider about comment out ";" at initial file. SO SORRY.

If you have used exec file, please download again from top of this thread link.

BTW, nobody meet some troubles? or nobody use this SlideOut version ??

Regards,

t0maz · 03-25-10, 03:36 PM

There is still link to version with v2 exe instead of v3...

Looks interesting. I wonder if it's possibe to use this as Angle on Bow Calculator like this one -> http://www.subsim.com/radioroom/down...do=file&id=596

I will give it a try when you upload v3 exe

ottos · 03-26-10, 09:19 AM

Quote:

Originally Posted by t0maz

There is still link to version with v2 exe instead of v3...

Geeeee, what a stupid I am.

I did changed face url, not link url.

Very sorry to all, could you try it again? I have just corrected link url.
and t0maz! thanks to let me know.

Quote:

Originally Posted by t0maz

Looks interesting. I wonder if it's possibe to use this as Angle on Bow Calculator like this one -> http://www.subsim.com/radioroom/down...do=file&id=596

you may know already, I am fool... Are there much in demand?
Honestly said, I have never used AOB find tool, because I think SH3&5 (manual input) TDC play this role enough.
I consider about this matter this weekend....

Ablemaster · 03-26-10, 10:38 AM

Nice work, always liked the large dials, remember Sixfeeling mod for SH3, excellent stuff. Big dials that slide out are the way ahead i think, personal preferance i know, thanks for the work.

antanio · 03-31-10, 02:32 PM

Hi, I'm trying to use 3in1_vol3.exe with NewUIs_TDC_1_1_0_ByTheDarkWraith installed but if I try to check the SlideOutCompass option when I run it I receive the following error message "U-Script: a type isn't correct. or overflow.
PAGE_LAYOUT_SLIDECOMPASS.UWS:at line 126: SLEEP(0.1)"

What is wrong? Any suggestions?
Thank you.

ottos · 04-01-10, 10:21 AM

Quote:

Originally Posted by antanio

PAGE_LAYOUT_SLIDECOMPASS.UWS:at line 126: SLEEP(0.1)"

What is wrong? Any suggestions?
Thank you.

Hello,
Sounds too strange. SLEEP means just only SLEEP.... is it April fool? :P
I don't know what code has problem, cause by multiple statement code? cause by OS language??

Anyway, I have uploaded trial exec version which does not use multiple statement code.
Can you try?
And in case it does not work, I've prepared files for NewUIs_TDC_1_0_0_ByTheDarkWraith MOD in document folder.

Regards,

antanio · 04-01-10, 02:38 PM

Quote:

Originally Posted by ottos

Hello,
Sounds too strange. SLEEP means just only SLEEP.... is it April fool? :P
I don't know what code has problem, cause by multiple statement code? cause by OS language??

Anyway, I have uploaded trial exec version which does not use multiple statement code.
Can you try?
And in case it does not work, I've prepared files for NewUIs_TDC_1_0_0_ByTheDarkWraith MOD in document folder.

Link:http://www.mediafire.com/?mydwlgotd22

Regards,

HI ottos, unfortunally I have the exactly same problem with trial version. Please note that I'm using the last "NewUIs_TDC_1_1_0_ByTheDarkWraith" Mod and not the NewUIs_TDC_1_0_0_ByTheDarkWraith. Perhaps this is tha cause of the error. If you cannot find a solution, could you please send me the download link of the files for the NewUIs_TDC_1_1_0_ByTheDarkWraith MOD?
Thank you for you effort,

Regards.

ottos · 04-02-10, 09:38 AM

Quote:

Originally Posted by antanio

HI ottos, unfortunally I have the exactly same problem with trial version. Please note that I'm using the last "NewUIs_TDC_1_1_0_ByTheDarkWraith" Mod and not the NewUIs_TDC_1_0_0_ByTheDarkWraith. Perhaps this is tha cause of the error. If you cannot find a solution, could you please send me the download link of the files for the NewUIs_TDC_1_1_0_ByTheDarkWraith MOD?
Thank you for you effort,

Regards.

Hello, captain antanio,
Hmmm, Can you try once again? probably this is the last try...
change only Sleep(0.1sec)-> Sleep(1.0sec)

BTW, I do not notice NewUIs was version up. (I like old style version :-P)
Sorry to waste your time.

download: http://www.mediafire.com/?axjywdmn31i

Regards,

antanio · 04-02-10, 09:51 AM

Quote:

Originally Posted by ottos

Hello, captain antanio,
Hmmm, Can you try once again? probably this is the last try...
change only Sleep(0.1sec)-> Sleep(1.0sec)

BTW, I do not notice NewUIs was version up. (I like old style version :-P)
Sorry to waste your time.

download: http://www.mediafire.com/?axjywdmn31i

Regards,

Thank you very much, I can't give it a try until tuesday. I will let you know. Have a nice weekend!

antanio · 04-07-10, 10:21 AM

Quote:

Originally Posted by ottos

Hello, captain antanio,
Hmmm, Can you try once again? probably this is the last try...
change only Sleep(0.1sec)-> Sleep(1.0sec)

BTW, I do not notice NewUIs was version up. (I like old style version :-P)
Sorry to waste your time.

download: http://www.mediafire.com/?axjywdmn31i

Regards,

Hi captain ottos, this new .exe version works perfectly ! Thank you very much.

ottos · 04-08-10, 10:05 AM

Quote:

Originally Posted by antanio

Hi captain ottos, this new .exe version works perfectly ! Thank you very much.

Sounds good

thanks for your many trial. this imfomation is very useful for me.

ottos · 04-08-10, 10:15 AM

(12.Apr.2010 edit)
I can get rid of the "Beta" description!

* Known Issue
　　- Grab Position of MiddleSlideRule <--- SOLVED

　　- Grab Position of SlideRuleCursor <--- SOLVED

　　- This SlideRule's scale is not precision.

* Note
　I don't know whether was or was not ARISTO's SlideRule used by U-Boat submariner, historically.
　Besides, I could find only one picture of SlideRule on the net, Marineschule's No: 20 'Kiel' model.
http://www.atlantik-pirat.com/Gallery1.htm

* Special thanks
　　http://www.atlantik-pirat.com/
　　http://www.sliderulemuseum.com/
　　http://www.oughtred.org/

03-22-10, 10:17 PM	#18
ottos Mate Join Date: May 2005 Posts: 57 Downloads: 63 Uploads: 0	SlideOut version is OUT SlideOUT and Stand Alone version is OUT 　　- SlideOut/ SlideIn from Left Top edge of game screen. 　- remove from UserRadio Page. 　- Add CheckBox to stay on the game screen Last edited by ottos; 03-25-10 at 11:35 AM.

03-26-10, 10:38 AM	#22
Ablemaster An able master Join Date: Jan 2010 Location: England Posts: 274 Downloads: 121 Uploads: 5	Nice work, always liked the large dials, remember Sixfeeling mod for SH3, excellent stuff. Big dials that slide out are the way ahead i think, personal preferance i know, thanks for the work. __________________

03-31-10, 02:32 PM	#23
antanio Watch Join Date: May 2005 Location: Florence Italy Posts: 29 Downloads: 232 Uploads: 0	error message Hi, I'm trying to use 3in1_vol3.exe with NewUIs_TDC_1_1_0_ByTheDarkWraith installed but if I try to check the SlideOutCompass option when I run it I receive the following error message "U-Script: a type isn't correct. or overflow. PAGE_LAYOUT_SLIDECOMPASS.UWS:at line 126: SLEEP(0.1)" What is wrong? Any suggestions? Thank you. __________________ Medal,medal ,medal...

04-08-10, 10:15 AM	#30
ottos Mate Join Date: May 2005 Posts: 57 Downloads: 63 Uploads: 0	Add SlideRule_Reitz (Release) (12.Apr.2010 edit) I can get rid of the "Beta" description! * Known Issue 　　- Grab Position of MiddleSlideRule <--- SOLVED 　　- Grab Position of SlideRuleCursor <--- SOLVED 　　- This SlideRule's scale is not precision. * Note 　I don't know whether was or was not ARISTO's SlideRule used by U-Boat submariner, historically. 　Besides, I could find only one picture of SlideRule on the net, Marineschule's No: 20 'Kiel' model. http://www.atlantik-pirat.com/Gallery1.htm * Special thanks 　　http://www.atlantik-pirat.com/ 　　http://www.sliderulemuseum.com/ 　　http://www.oughtred.org/ Last edited by ottos; 04-12-10 at 11:15 AM. Reason: Change the status of the MOD

03-22-10, 09:59 AM	#17
wildcards Sailor man Join Date: Mar 2008 Posts: 46 Downloads: 58 Uploads: 0	Thanks Ottos, I'll tweak my code when I get home and give it a test spin.

03-25-10, 11:40 AM	#19
ottos Mate Join Date: May 2005 Posts: 57 Downloads: 63 Uploads: 0	-Notice- Corresponding　to "NewUIs_TDC_1_0_0_ByTheDarkWraith", I have replaced exec file. 3in1_vol2-> 3in1_vol3. old one makes CTD under "NewUIs_TDC_1_0_0_ByTheDarkWraith" circumustace, because I did not consider about comment out ";" at initial file. SO SORRY. If you have used exec file, please download again from top of this thread link. BTW, nobody meet some troubles? or nobody use this SlideOut version ?? Regards,

03-25-10, 03:36 PM	#20
t0maz Ensign Join Date: Apr 2007 Location: Poland Posts: 231 Downloads: 44 Uploads: 0	There is still link to version with v2 exe instead of v3... Looks interesting. I wonder if it's possibe to use this as Angle on Bow Calculator like this one -> http://www.subsim.com/radioroom/down...do=file&id=596 I will give it a try when you upload v3 exe