Navigation and Attack maps not extending

[DeckHand]

I'm stumped. I have read the tutorials and everything makes sense to me. Still, my two maps are not extending while using ARB WideGUI 1920 x 1080.

My system:
A Surface Book running Windows 10
Steam SHIII running GWX3 Gold

My JSGME state:
Activated Mods:
M.E.P. v6
GWX - Open Hatch Mod
Thomsens's Sound Pack V3.2cfg
GWX - Enhanced Damage Effects
Ahnenerbe WideGui 1920 x 1080 Final
supplement

(Why are the first three in a light shade of gray?)

I made a backup of sh3.exe.

I unzipped [S3H]_SH3-H.sie_V16B1-Patch-Kit

I copied my unpatched sh3.exe to [S3H]_SH3-H.sie_V16B1-Patch-Kit.

I ran Patch_SH3.bat which results in a patched sh3.exe and a backup
10/21/2019 04:10 PM <DIR> supplement
02/20/2012 12:35 PM <DIR> tool
06/13/2011 01:36 PM 154,171 Optional O2-Gauges v2 (JSGME).7z
02/20/2012 12:07 PM 5,491,158 Supplement to V16B1 (JSGME).7z
02/20/2012 12:55 PM 1,389 Patch_SH3.bat
02/20/2012 12:54 PM 10,456 HSIEoptions.chm
07/06/2011 02:26 AM 323,584 HsieOptionsSelector.exe
10/21/2019 04:05 PM 1,384,448 sh3.exe
10/14/2011 11:53 AM 5,810 _Merge_with_Campaign_SCR.mis
09/25/2019 03:47 PM 1,339,392 sh3.old
02/20/2012 12:48 PM 175,977 Readme_V16B1.pdf
02/10/2012 01:24 PM 6,283 _Append_to_de_menu.txt
02/10/2012 01:25 PM 4,818 _Append_to_en_menu.txt
02/16/2012 02:43 PM 1,182 HSIEContents.txt

I unzipped TychoSh3Patch

I copy the patched sh3.exe from [S3H]_SH3-H.sie_V16B1-Patch-Kit to TychoSh3Patch\WorkFolder.

I run TychoSh3Patch.bat without modifying TychoSh3Patch.map.

I copy newly patched sh3.exe to "\Program Files (x86)\Steam\steamapps\common\Silent Hunter 3"

I run sh3 and check my navigation map. Didn't work.

I read the tutorials and realized that I need to modify TychoSh3Patch.map.

Here are my mods:

@@@ Expand Nav and Attack maps render limit, from 1024x1024 to 2048x2048.
@@
000A8E75: 00 00
000A8E76: 04 08
000A8E77: 00 00
000A8E78: 00 00
@@
000A8E7A: 00 00
000A8E7B: 04 08
000A8E7C: 00 00
000A8E7D: 00 00
@@
00109003: 00 00
00109004: 04 08
00109005: 00 00
00109006: 00 00
@@
00109008: 00 00
00109009: 04 08
0010900A: 00 00
0010900B: 00 00
@@
000739E4: 04 00
[Hint - I removed the '@@@' in front of the addresses]

I copy newly, newly patched sh3.exe to "\Program Files (x86)\Steam\steamapps\common\Silent Hunter 3"

I run sh3 and check my navigation map. Didn't work.

I read the tutorials and realized that I need to modify maps.cfg as well.

Upon examination I found maps.cfg was already modified:
[Map0]
MapID=Navigation_map
Position=-449,0
;Resolution=1024,656
Resolution=1920,1057
;MajorSqrs=4,2.4
MajorSqrs=4,3.3
MinorSqrs=5,5
PixPerUnit=50
ZoomLevels=1,2,5,10,20,50,100,200,500,1000,2000,40 00,7000,10000,20000,40000 ;meters per pixel
InitialZoom=500
SymbolZoom=10;units are drawn as symbols from this zoom up
GroupsZoom=100;units are drawn in groups from this zoom up
CityZoom=10000;city names are displayed from this zoom down
KriegZoom=2000;krieg labels are separated displayed from this zoom up
HarborZoom=50;harbors will be displayed from this zoom up

[Map1]
MapID=Attack_map
Position=-449,0
;Resolution=1024,656
Resolution=1920,1057

I am STUMPED!!

Thanks for any help.
Paul

[Aktungbby]

DeckHand!

[mikey117us]

It could be steam. SH3 in steam program files (x86)
Will pose a problem if you patch your SH3.exe to large address aware 4gb patch it won’t work and Large mods that use Excessive ram will crash or give poor results.
Steam Has to be outside program files (x86) I just use a made up root folder called games. I don’t have SH3 from steam, but I do have steam and it runs fine outside the default install location. there may be other helpful tips on steam and SH3 in the forum.
Steam does not like mods, and mods don’t like steam.

[blackswan40]

Hi DeckHand check this Thread from the Line Chief Chief Mod Guru THEBERBSTER



https://www.subsim.com/radioroom/sho...d.php?t=219068

[DeckHand]

Originally Posted by blackswan40

Hi DeckHand check this Thread from the Line Chief Chief Mod Guru THEBERBSTER



https://www.subsim.com/radioroom/sho...d.php?t=219068

This is a great page. I found it a few days ago.

[THEBERBSTER]

A Warm Welcome To The Subsim Community > DeckHand
Subsim <> Make A Donation <> See The Benefits <> Support The Community
SH3 – 4 - 5 Tutorials > Downloads > Other Useful Information > See Links in My Signature Below

First of all I know nothing about STEAM "propbeanie" is the king of STEAM.

[QUOTE]Navigation and Attack maps not extending[/QUOTE] With your game installed unmodded were you able to run the stock game?

GWX 3.0 and HSIE applications both are patched to the SH3.exe

Also added is

Ahnenerbe WideGui 1920 x 1080 Final supplement

Do not know what you mean by the word "supplement"

Also added is

TychoSh3Patch

There is a lot going on here, have you read these instructions properly?
https://www.subsim.com/radioroom/sho...d.php?t=231140
This patch will not work by default with Steam version of the "sh3.exe"! In order to use it, you must first apply "H.Sie patch".

This patch will change your "sh3.exe" file.
You have to follow some rules, to avoid possible problems:
1. Archive and keep somewhere safe your original "sh3.exe" file.
2. There are other patches, that make changes to the "sh3.exe" file, like "Hardcode fixes (H.Sie)" and "Add-on for hardcore fixes (Stiebler)", install these before my patch.
3. When you are dealing with such patches, you must always start from original "clean" "sh3.exe" file.
Here I think of four variants:

• Your SH3 is not Steam version, and you do not use "H.Sie fixes" and "Stiebler add-on": you take your original "sh3.exe" and patch it with my patch.
• You use "H.Sie fixes": you take your original "sh3.exe" and patch and set-up it according to H.Sie's instructions. After that you copy this already patched "sh3.exe" file and patch it with my patch.
• You use "H.Sie fixes" and "Stiebler add-on": you take your original "sh3.exe" and patch it with "H.Sie fixes", then patch and set-up it with "Stiebler add-on", according to Stiebler's instructions. After that you copy this already patched "sh3.exe" file and patch it with my patch.
• If you use the Steam version of the game. You must first use the "Hardcode fixes (H.Sie)" before my patch. "Add-on for hardcore fixes (Stiebler)" is optional, but also before my patch.

Test each stage as you go.
Disable the Ahnenerbe mod and test your game and see if you are getting the same problem?

If yes, you need to IMO start again and take each stage of the instructions one at a time and check that your game runs correctly before adding another application.

Disable the rest of the mods if necessary these can be added later.

Peter

[DeckHand]

Originally Posted by mikey117us

It could be steam.
Steam does not like mods, and mods don’t like steam.

You are probably right. I will be back in Ohio in November. My original SHIII is in storage. I think I need to dig it out.