s3d issue

kaizerkat · 07-01-17, 05:35 PM

downloaded S3D editor V0.99 and i run windows 7 64bit and can not get it to download onto my computer. Clean registry, defragged etc, still nothing, any ideas?

BigWalleye · 07-01-17, 06:23 PM

Using WinRAR, or 7Zip? WinZip won't unpack .rar files.

kaizerkat · 07-01-17, 06:51 PM

using 7 zip. it unpacks the files but when it comes to installing it goes almost to the end and then gives a error 1001 message"can not load file or assembly 'sort.nip' or one of its dependencies.

THEBERBSTER · 07-02-17, 03:40 AM

Hi k
The file may be blocked or read only.
In Properties, security, advanced, Edit, allow full control.
Peter

kaizerkat · 07-02-17, 11:59 AM

thank you. Hey berb do u think trying to download the S3d corrupted a sound file? i get no voice sound for commands, all other sounds ok

BTW just looked at my installer file and it does have full permission. Maybe it does not like windows 7, although it was on there before.

THEBERBSTER · 07-02-17, 01:26 PM

Hi k
Just reading up on S3d on Subsim.
It is a 10 year old application so it may or may not be compatible with your current Windows OS?
I take it that you have checked that you have the system requirements especially Microsoft .NET 2.0?

No experience of this I am afraid as I am not one who likes tinkering with game files.
Peter

Fubar2Niner · 07-02-17, 02:50 PM

Quote:

Originally Posted by kaizerkat

using 7 zip. it unpacks the files but when it comes to installing it goes almost to the end and then gives a error 1001 message"can not load file or assembly 'sort.nip' or one of its dependencies.

Hi mate.

Look at your download shortcut/zip go props then select the unblock tab. It should show some like the file is an untrusted or such wording. Hit unblock then unzip and install.

Hope this helps, been trying to find something on my rig I could s/s but no joy....

Any probs hoot

Best regards.

Fubar

kaizerkat · 07-02-17, 05:06 PM

wow still no go. is there another program besides a hex editor i can use to open sh3 files?

hauangua · 07-03-17, 12:13 AM

I have Windows 10 64 and S3d work good... Maybe you have corrupted download file?
Which files want open with S3d?

kaizerkat · 07-03-17, 04:41 PM

maybe. i downloaded off the home site 4x and i think my os is rejecting it, although i had it there before.

Lance71 · 07-04-17, 02:13 AM

Hi, kaizerkat!
From readme of S3D:
"IMPORTANT: The installer included in this package does NOT install the required components listed below. Please use the links to download the components if you don't have them installed on your computer:

* Microsoft .NET 2.0

Vista users can skip this component (.NET 2 comes out of the box with Vista).

For 32-bit editions of Windows:
http://www.microsoft.com/downloads/d...displaylang=en

For 64-bit editions of Windows:
http://www.microsoft.com/downloads/d...displaylang=en

* Microsoft DirectX 9.0c (Managed)

http://www.microsoft.com/downloads/details.aspx?familyid=2da43d38-db71-4c1b-bc6a-9b6652cd92a3&displaylang=en"

May be this will help...
(on my win7 x64 install, reinstall and run clearly)
Best regards.

kaizerkat · 07-04-17, 03:33 PM

do you mean remove directX 11 and install 9.0c?everything else is on my computer

Olamagato · 07-04-17, 04:12 PM

Install DirectX 9.x without remove DirectX 10+ because DX 10+ is not compatible with DX <= 9. Then both packages may be exist on this same Windows OS. You can install DX 9 in compatible mode Windows XP SP2 (not SP3 because almost old games are compatible with this version of Service Pack)

kaizerkat · 07-08-17, 01:27 PM

ok im back. can someone please send me a working version of this S3d tool. i have tried everything u guys said and maybe the file i download several times is corrupt. I had it on my computer b4 so i do not understand why its impossible now. DAMN IT i need this tool. thank you everyone for ur participation.

propbeanie · 07-08-17, 03:34 PM

http://s3d.skwas.com/downloads.aspx

http://www.subsim.com/radioroom/down...o=file&id=4489

The only places I'd trust... and I'd trust SubSim way before Swas' site...

07-01-17, 05:35 PM	#1
kaizerkat Helmsman Join Date: May 2006 Posts: 110 Downloads: 498 Uploads: 0	s3d issue downloaded S3D editor V0.99 and i run windows 7 64bit and can not get it to download onto my computer. Clean registry, defragged etc, still nothing, any ideas?

07-02-17, 03:40 AM	#4
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Dibden Purlieu - Southampton Posts: 9,605 Downloads: 1123 Uploads: 0	Hi k The file may be blocked or read only. In Properties, security, advanced, Edit, allow full control. Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

07-02-17, 11:59 AM	#5
kaizerkat Helmsman Join Date: May 2006 Posts: 110 Downloads: 498 Uploads: 0	thank you. Hey berb do u think trying to download the S3d corrupted a sound file? i get no voice sound for commands, all other sounds ok BTW just looked at my installer file and it does have full permission. Maybe it does not like windows 7, although it was on there before. Last edited by kaizerkat; 07-02-17 at 12:10 PM.

07-02-17, 01:26 PM	#6
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Dibden Purlieu - Southampton Posts: 9,605 Downloads: 1123 Uploads: 0	Hi k Just reading up on S3d on Subsim. It is a 10 year old application so it may or may not be compatible with your current Windows OS? I take it that you have checked that you have the system requirements especially Microsoft .NET 2.0? No experience of this I am afraid as I am not one who likes tinkering with game files. Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

07-03-17, 12:13 AM	#9
hauangua Grey Wolf Join Date: Jul 2011 Location: Verona, Italy Posts: 913 Downloads: 1333 Uploads: 0	I have Windows 10 64 and S3d work good... Maybe you have corrupted download file? Which files want open with S3d? __________________ Parked under the balcony with my U-27 waiting Juliet finish makeup

07-01-17, 06:23 PM	#2
BigWalleye Sea Lord Join Date: Jul 2012 Location: On the Eye-lond, mon! Posts: 1,987 Downloads: 465 Uploads: 0	Using WinRAR, or 7Zip? WinZip won't unpack .rar files.

07-01-17, 06:51 PM	#3
kaizerkat Helmsman Join Date: May 2006 Posts: 110 Downloads: 498 Uploads: 0	using 7 zip. it unpacks the files but when it comes to installing it goes almost to the end and then gives a error 1001 message"can not load file or assembly 'sort.nip' or one of its dependencies.

07-02-17, 05:06 PM	#8
kaizerkat Helmsman Join Date: May 2006 Posts: 110 Downloads: 498 Uploads: 0	wow still no go. is there another program besides a hex editor i can use to open sh3 files?

07-03-17, 04:41 PM	#10
kaizerkat Helmsman Join Date: May 2006 Posts: 110 Downloads: 498 Uploads: 0	maybe. i downloaded off the home site 4x and i think my os is rejecting it, although i had it there before.

07-04-17, 02:13 AM	#11
Lance71 Watch Join Date: Nov 2009 Posts: 20 Downloads: 74 Uploads: 0	Hi, kaizerkat! From readme of S3D: "IMPORTANT: The installer included in this package does NOT install the required components listed below. Please use the links to download the components if you don't have them installed on your computer: * Microsoft .NET 2.0 Vista users can skip this component (.NET 2 comes out of the box with Vista). For 32-bit editions of Windows: http://www.microsoft.com/downloads/d...displaylang=en For 64-bit editions of Windows: http://www.microsoft.com/downloads/d...displaylang=en * Microsoft DirectX 9.0c (Managed) http://www.microsoft.com/downloads/details.aspx?familyid=2da43d38-db71-4c1b-bc6a-9b6652cd92a3&displaylang=en" May be this will help... (on my win7 x64 install, reinstall and run clearly) Best regards.

07-04-17, 03:33 PM	#12
kaizerkat Helmsman Join Date: May 2006 Posts: 110 Downloads: 498 Uploads: 0	do you mean remove directX 11 and install 9.0c?everything else is on my computer

07-04-17, 04:12 PM	#13
Olamagato Torpedoman Join Date: Nov 2010 Location: Zielona Góra, Poland Posts: 116 Downloads: 72 Uploads: 0	Install DirectX 9.x without remove DirectX 10+ because DX 10+ is not compatible with DX <= 9. Then both packages may be exist on this same Windows OS. You can install DX 9 in compatible mode Windows XP SP2 (not SP3 because almost old games are compatible with this version of Service Pack)

07-08-17, 01:27 PM	#14
kaizerkat Helmsman Join Date: May 2006 Posts: 110 Downloads: 498 Uploads: 0	ok im back. can someone please send me a working version of this S3d tool. i have tried everything u guys said and maybe the file i download several times is corrupt. I had it on my computer b4 so i do not understand why its impossible now. DAMN IT i need this tool. thank you everyone for ur participation.

07-08-17, 03:34 PM	#15
propbeanie CTD - it's not just a job Join Date: May 2016 Location: One hour from Music City USA! Posts: 9,735 Downloads: 439 Uploads: 2	http://s3d.skwas.com/downloads.aspx http://www.subsim.com/radioroom/down...o=file&id=4489 The only places I'd trust... and I'd trust SubSim way before Swas' site... __________________ "...and bollocks to the naysayer/s" - Jimbuna