[REL] CSP Magui Interface for SH5 - Page 66

hschmitz · 04-10-13, 06:47 AM

Hello DrJones,

Just a small Question: Is there a a way to switch Travel Mode on/off
or to switch to 1 TC on every report ?

In the moment i have the problem that i will often miss contact reports
from my bridge crew.

Best Regards

hschmitz

04-10-13, 08:20 AM

Quote:

Originally Posted by hschmitz

Hello DrJones,

Just a small Question: Is there a a way to switch Travel Mode on/off
or to switch to 1 TC on every report ?

In the moment i have the problem that i will often miss contact reports
from my bridge crew.

Best Regards

hschmitz

take a look here http://www.subsim.com/radioroom/show...78&postcount=3

BigWalleye · 04-10-13, 09:24 AM

I've used MaGui myself and think it looks great! But I don't recall ever seeing a switch for Travel mode. Does anyone know if there is one built into the interface?

DrJones · 04-10-13, 12:07 PM

Quote:

Originally Posted by BigWalleye

I've used MaGui myself and think it looks great! But I don't recall ever seeing a switch for Travel mode. Does anyone know if there is one built into the interface?

Hey Mates...

the Switch for the Travelmode can be found on the captains Panel...

You can make it visible by clicking on the captains face in the lower menu bar...

Best Regards

DrJones

BigWalleye · 04-10-13, 03:30 PM

Thank you. DrJones.

hschmitz · 04-11-13, 05:08 AM

Hello,

Thank you.

Best Regards

hschmitz

SH_Player · 04-27-13, 01:48 PM

Hello all,

sorry for my possibly poor english. First I want to say: great work, this mod looks absolutely amazing

.
But I have a problem using this mod with Schleichfahrt.

Schleichfahrt_1_0a_part1
Parts Magui V 3.01 by DrJones
IO_StrategicMap_4_3_for_Parts Magui V 3.0 by DrJones
MineFieldMap for IO_StrategicMap_for_CSPMagui
Schleichfahrt_1_0h_part2
Schleichfahrt_1_0h_deutschpatch

So, when the mod is enabled, after a few minutes the following problem appears:

It is like the hud is frozen. After the start of the game everything is fine. But when the bottom-right menu slides in and then klicking at watch officer and for example the deck gun, the menü won't slide out (menu-fixing disabled). Another problem is, when i go to periscope and/or uzo and then leave the station with esc, the tdc and torpedo tube controls stay on screen. Both things happen "random", means, sometimes after I entered the Station second or third time (not first), same for the "menu-slide-problem". The stuck-menu thing concerns only the bottom-right menu the others work fine, no matter if this menu is stuck or not.

Result is, after a random time in game, it crashes with ctd. For example when in klick on load game or when i get near Kiel harbor after the first mission in baltic sea (time acceleration x8 or x256 doesn't matter).

It happens also when the CSP Magui is enabled on a vanilla-version of SH5 without other mods.

The above mentioned mod-combination (Schleichfahrt) runs fine, when the TDW UI is enabled instead of CSP Magui. But i prefer the Magui, excellent work! Any chance to get this problem solved?

Machine specs:
i7 3770k (no extra oc)
16Gb Ram
GTX 670

I tried Nvidia-Driver 314.07 and the newest 314.22 with no luck.

regards,
SH_P

EDIT: I got ctd with TDW UI also. But not so often as with Magui. :-/

Silent Steel · 04-28-13, 11:23 AM

Quote:

Originally Posted by SH_Player

Hello all,

But I have a problem using this mod with Schleichfahrt.

Schleichfahrt_1_0a_part1
Parts Magui V 3.01 by DrJones
IO_StrategicMap_4_3_for_Parts Magui V 3.0 by DrJones
MineFieldMap for IO_StrategicMap_for_CSPMagui
Schleichfahrt_1_0h_part2
Schleichfahrt_1_0h_deutschpatch

It is like the hud is frozen. After the start of the game everything is fine. But when the bottom-right menu slides in and then klicking at watch officer and for example the deck gun, the menü won't slide out (menu-fixing disabled). Another problem is, when i go to periscope and/or uzo and then leave the station with esc, the tdc and torpedo tube controls stay on screen. Both things happen "random", means, sometimes after I entered the Station second or third time (not first), same for the "menu-slide-problem". The stuck-menu thing concerns only the bottom-right menu the others work fine, no matter if this menu is stuck or not.

Result is, after a random time in game, it crashes with ctd. For example when in klick on load game or when i get near Kiel harbor after the first mission in baltic sea (time acceleration x8 or x256 doesn't matter).

It happens also when the CSP Magui is enabled on a vanilla-version of SH5 without other mods.

The above mentioned mod-combination (Schleichfahrt) runs fine, when the TDW UI is enabled instead of CSP Magui. But i prefer the Magui, excellent work! Any chance to get this problem solved?

Machine specs:
i7 3770k (no extra oc)
16Gb Ram
GTX 670

I tried Nvidia-Driver 314.07 and the newest 314.22 with no luck.

regards,
SH_P

EDIT: I got ctd with TDW UI also. But not so often as with Magui. :-/

Hallo SH Player and welcome to the forum

Your specs are most perfect.
First, are you sure your SH5 is updated to v1.2.0 ?

Maybe you could try this load order (I've not tried this one myself yet);

Schleichfahrt_1_0a_part1
Schleichfahrt_1_0h_part2
Schleichfahrt_1_0h_deutschpatch
Parts Magui V 3.01 by DrJones
IO_StrategicMap_4_3_for_Parts Magui V 3.0 by DrJones
MineFieldMap for IO_StrategicMap_for_CSPMagui

I recognize your problem and I've tried several times to get SH5 running with the Schleichfart + CSP Magui and never got it running

Like you I prefer the CSP and if there is some solution om how to get it running with Schleichfahrt I beg you all mates around to share it with us.

Could you please report back (or send me a PM) and let me know if you get it running.

As for the Nvidia driver I think the 314.22 is the most stable one. Beware! There is a new 320.00 Beta out now - DON'T TRY IT, it's just crap.

Gute Jagd Herr Kaleun

SH_Player · 04-28-13, 02:14 PM

Quote:

Originally Posted by Silent Steel

First, are you sure your SH5 is updated to v1.2.0 ?

Thanks for your reply

Sure, SH5 is patched to v 1.2.0.

I'll try that with your load order and report here.

BigWalleye · 04-28-13, 04:16 PM

I run Schliechfahrt with Magui without problems. I use the this modlist:

sobers game loading tips V4 SH5
Schleichfahrt_1_0a_part1 (STOCK KBD)
Parts Magui V 3.01 by DrJones
Schleichfahrt_1_0h_part2
IO_StrategicMap_4_3_for_Parts Magui V 3.0 by DrJones
IO_MapCourseLine_sharp pencil_mod
IO_ShapeTextures_NO_mod
EQuaTool 01.01 by AvM - Kriegsmarine Woody Regular Style
EQuaTool 01.01 by AvM - add-on - Large Style Ruler
EQuaTool 01.01 by AvM - add-on - Coloured Simple Tools
Fix clock rear torpedo room VIIA
SH5_7A_Conning_Fix
Accurate German Flags
Fuel Gauge WoGaDi_SteelViking's Interior
MCCD_1.04_MFCM_1.2.1_compatible
German U-Boat Crew Language Pack
Grossdeutscher Rundfunk
Messervy_s_gramophone_pack1
Speech Recognition_MiTons_v0.4_english for Magui
TDW_GenericPatcher_v1_0_79_0

I also run Schliechfahrt with TDW's New_UIs. In both cases, I put only the UI mod itself inside the "Schliechfahrt sandwich." I put all add-ons to the UI mod after Schliechfahrt part 2. I may have picked up this tip from someone on this forum. (If so, thank you and I wish I could remember who you are and give you credit!) In any case, it works.

Another tip: I run both Schliechfahrt modpacks at reduced graphic quality. I have a middle-weight machine and it can't handle the load. I have not tried to find the optimum setting. I just strap everything down to the minimum. To my (perhaps uncritical) eye, it still looks pretty good! YMMV. I set the SH5 graphics options to the "Low" setting, except for AA, which I turn up full. I set my graphics card settings all to "application-controlled." And on the Compatibility tab of the Windows 7 Properties dialog, I check "Disable visual themes" and "Disable desktop composition."

This reduced graphics quality may not suit everyone. But, as I said, it looks good to me and I can play the game without CTDs. If you try this approach and it works, you can always improve the graphics quality incrementally to achieve your own balance of appearance and stability.

Hope these suggestions are useful. Best of luck!

SH_Player · 04-28-13, 05:01 PM

Ok, I tried Silent Steels load list and the result was a ctd. Then I tried BigWalleyes method with just this combination:

Schleichfahrt_1_0a_part1
Parts Magui V 3.01 by DrJones
Schleichfahrt_1_0h_part2
IO_StrategicMap_4_3_for_Parts Magui V 3.0 by DrJones

But the problem still exists.
BigWalleye can you tell me what "STOCK KBD" means in your list? (Schleichfahrt part 1)

Thank you very much for your help, both of you! But THIS game makes me sick -.-

BigWalleye · 04-28-13, 05:30 PM

"STOCK KBD" is just the stock commands.cfg file. I don't want to have to relearn the key bindings for different mods, so I just drop it into the mod's Cfg folder. That shouldn't create any different behavior.

Did you dial down the graphics quality? If I run with the high settings, I can't use Schliechfahrt at all. It will CTD on loading.

SH_Player · 04-29-13, 04:04 AM

Quote:

Originally Posted by BigWalleye

"STOCK KBD" is just the stock commands.cfg file.

Ah, ok. Thanks.

Quote:

Originally Posted by BigWalleye

Did you dial down the graphics quality? If I run with the high settings, I can't use Schliechfahrt at all. It will CTD on loading.

Yes. I tried with maximum and minimal graphic settings. Loading is not the problem. I start new career, skip tutorial. When entering the base, I check if I can klick on the options to equip my sub, if not... reloading. If everything is 'fine' I start the patrol (loading screen comes up).

And then, when I am at the subs bridge and I click on uzo and then leave the station. the tdc-controls freeze on screen like in the posted screenshot above. And when i slide out the officers-menu (bottom right) and klick on an officer (e.g. watchofficer and THEN e.g. on the deckgun), the menu will not slide out of the screen and freezes like the tdc-controls (wich are still clickable).

Maximum or minimum graphics settings doesn't matter. I can't see a difference in game behaviour.

Silent Steel · 04-29-13, 04:23 AM

Quote:

Originally Posted by BigWalleye

I run Schliechfahrt with Magui without problems.
Hope these suggestions are useful. Best of luck!

Thank you BigWalleye!

For sure interesting suggestions. Will try this, never thought of activating the CSP BETWEEN the Schleichfahrt mod parts.
BTW - what GPU are you running?
RAM?

Here are my suggestions to improve your mods list (and one question);

No Logo Intro Menu_Animation by AvM < Add this one to get rid of the annoying intro
sobers game loading tips V4 SH5
Schleichfahrt_1_0a_part1 (STOCK KBD)
Parts Magui V 3.01 by DrJones
Schleichfahrt_1_0h_part2
IO_StrategicMap_4_3_for_Parts Magui V 3.0 by DrJones
IO_MapCourseLine_sharp pencil_mod
IO_ShapeTextures_NO_mod
EQuaTool 01.01 by AvM - Kriegsmarine Woody Regular Style
EQuaTool 01.01 by AvM - add-on - Large Style Ruler
EQuaTool 01.01 by AvM - add-on - Coloured Simple Tools
Fix clock rear torpedo room VIIA
SH5_7A_Conning_Fix
Accurate German Flags
Fuel Gauge WoGaDi_SteelViking's Interior
MightyFine Crew Mod < To get the 'MCCD_1.04_MFCM_1.2.1_compatible' mod running properly - add this one
MCCD_1.04_MFCM_1.2.1_compatible
German U-Boat Crew Language Pack < Is this one needed when you run the Schleichfahrt mod?
Grossdeutscher Rundfunk
Messervy_s_gramophone_pack1
Speech Recognition_MiTons_v0.4_english for Magui
TDW_GenericPatcher_v1_0_79_0

BTW - to get better FPS - have you tried this one - Antilag?
Make sure you read the 'readme.txt' file - this not an ordinary mod that can be activated with JSGME

BigWalleye · 04-29-13, 06:47 AM

SS, thanks for the tips. I do run antilag - forgot about it, since it's not on the modlist! And it does help.

Running an Dell Alienware M11X r3. 17@1.70 with 8GB and NVidia 540M. Tweaked-up mini laptop. I am mobile much of the time, so I need a very toteable machine.

I use No Logo on my Sober's-based modlist. Don't need it with Schliechfahrt - load graphic is a U-boat entering the pens. And I prolly don't need the German Language Pack with Schliechfahrt. But I thought MFCM was built into Schliechfahrt, so I didn't need to add it. Am I incorrect?

SH_Player. we gotta get you going! Does the stock game run OK? Have you tried any other modlists? Do you have any other mods loaded? Are you running a download from Steam?

04-10-13, 06:47 AM	#976
hschmitz Nub Join Date: Mar 2013 Posts: 2 Downloads: 17 Uploads: 0	Travel Mode Hello DrJones, Just a small Question: Is there a a way to switch Travel Mode on/off or to switch to 1 TC on every report ? In the moment i have the problem that i will often miss contact reports from my bridge crew. Best Regards hschmitz

04-11-13, 05:08 AM	#981
hschmitz Nub Join Date: Mar 2013 Posts: 2 Downloads: 17 Uploads: 0	Travel Mode Hello, Thank you. Best Regards hschmitz

04-27-13, 01:48 PM	#982
SH_Player Swabbie Join Date: Apr 2013 Location: Germany Posts: 8 Downloads: 117 Uploads: 0	Hello all, sorry for my possibly poor english. First I want to say: great work, this mod looks absolutely amazing . But I have a problem using this mod with Schleichfahrt. Schleichfahrt_1_0a_part1 Parts Magui V 3.01 by DrJones IO_StrategicMap_4_3_for_Parts Magui V 3.0 by DrJones MineFieldMap for IO_StrategicMap_for_CSPMagui Schleichfahrt_1_0h_part2 Schleichfahrt_1_0h_deutschpatch So, when the mod is enabled, after a few minutes the following problem appears: It is like the hud is frozen. After the start of the game everything is fine. But when the bottom-right menu slides in and then klicking at watch officer and for example the deck gun, the menü won't slide out (menu-fixing disabled). Another problem is, when i go to periscope and/or uzo and then leave the station with esc, the tdc and torpedo tube controls stay on screen. Both things happen "random", means, sometimes after I entered the Station second or third time (not first), same for the "menu-slide-problem". The stuck-menu thing concerns only the bottom-right menu the others work fine, no matter if this menu is stuck or not. Result is, after a random time in game, it crashes with ctd. For example when in klick on load game or when i get near Kiel harbor after the first mission in baltic sea (time acceleration x8 or x256 doesn't matter). It happens also when the CSP Magui is enabled on a vanilla-version of SH5 without other mods. The above mentioned mod-combination (Schleichfahrt) runs fine, when the TDW UI is enabled instead of CSP Magui. But i prefer the Magui, excellent work! Any chance to get this problem solved? Machine specs: i7 3770k (no extra oc) 16Gb Ram GTX 670 I tried Nvidia-Driver 314.07 and the newest 314.22 with no luck. regards, SH_P EDIT: I got ctd with TDW UI also. But not so often as with Magui. :-/ Last edited by SH_Player; 04-27-13 at 02:13 PM.

04-28-13, 05:01 PM	#986
SH_Player Swabbie Join Date: Apr 2013 Location: Germany Posts: 8 Downloads: 117 Uploads: 0	Ok, I tried Silent Steels load list and the result was a ctd. Then I tried BigWalleyes method with just this combination: Schleichfahrt_1_0a_part1 Parts Magui V 3.01 by DrJones Schleichfahrt_1_0h_part2 IO_StrategicMap_4_3_for_Parts Magui V 3.0 by DrJones But the problem still exists. BigWalleye can you tell me what "STOCK KBD" means in your list? (Schleichfahrt part 1) Thank you very much for your help, both of you! But THIS game makes me sick -.- Last edited by SH_Player; 04-28-13 at 05:13 PM.

04-10-13, 09:24 AM	#978
BigWalleye Sea Lord Join Date: Jul 2012 Location: On the Eye-lond, mon! Posts: 1,987 Downloads: 465 Uploads: 0	I've used MaGui myself and think it looks great! But I don't recall ever seeing a switch for Travel mode. Does anyone know if there is one built into the interface?

04-10-13, 03:30 PM	#980
BigWalleye Sea Lord Join Date: Jul 2012 Location: On the Eye-lond, mon! Posts: 1,987 Downloads: 465 Uploads: 0	Thank you. DrJones.

04-28-13, 04:16 PM	#985
BigWalleye Sea Lord Join Date: Jul 2012 Location: On the Eye-lond, mon! Posts: 1,987 Downloads: 465 Uploads: 0	I run Schliechfahrt with Magui without problems. I use the this modlist: sobers game loading tips V4 SH5 Schleichfahrt_1_0a_part1 (STOCK KBD) Parts Magui V 3.01 by DrJones Schleichfahrt_1_0h_part2 IO_StrategicMap_4_3_for_Parts Magui V 3.0 by DrJones IO_MapCourseLine_sharp pencil_mod IO_ShapeTextures_NO_mod EQuaTool 01.01 by AvM - Kriegsmarine Woody Regular Style EQuaTool 01.01 by AvM - add-on - Large Style Ruler EQuaTool 01.01 by AvM - add-on - Coloured Simple Tools Fix clock rear torpedo room VIIA SH5_7A_Conning_Fix Accurate German Flags Fuel Gauge WoGaDi_SteelViking's Interior MCCD_1.04_MFCM_1.2.1_compatible German U-Boat Crew Language Pack Grossdeutscher Rundfunk Messervy_s_gramophone_pack1 Speech Recognition_MiTons_v0.4_english for Magui TDW_GenericPatcher_v1_0_79_0 I also run Schliechfahrt with TDW's New_UIs. In both cases, I put only the UI mod itself inside the "Schliechfahrt sandwich." I put all add-ons to the UI mod after Schliechfahrt part 2. I may have picked up this tip from someone on this forum. (If so, thank you and I wish I could remember who you are and give you credit!) In any case, it works. Another tip: I run both Schliechfahrt modpacks at reduced graphic quality. I have a middle-weight machine and it can't handle the load. I have not tried to find the optimum setting. I just strap everything down to the minimum. To my (perhaps uncritical) eye, it still looks pretty good! YMMV. I set the SH5 graphics options to the "Low" setting, except for AA, which I turn up full. I set my graphics card settings all to "application-controlled." And on the Compatibility tab of the Windows 7 Properties dialog, I check "Disable visual themes" and "Disable desktop composition." This reduced graphics quality may not suit everyone. But, as I said, it looks good to me and I can play the game without CTDs. If you try this approach and it works, you can always improve the graphics quality incrementally to achieve your own balance of appearance and stability. Hope these suggestions are useful. Best of luck!

04-28-13, 05:30 PM	#987
BigWalleye Sea Lord Join Date: Jul 2012 Location: On the Eye-lond, mon! Posts: 1,987 Downloads: 465 Uploads: 0	"STOCK KBD" is just the stock commands.cfg file. I don't want to have to relearn the key bindings for different mods, so I just drop it into the mod's Cfg folder. That shouldn't create any different behavior. Did you dial down the graphics quality? If I run with the high settings, I can't use Schliechfahrt at all. It will CTD on loading.

04-29-13, 06:47 AM	#990
BigWalleye Sea Lord Join Date: Jul 2012 Location: On the Eye-lond, mon! Posts: 1,987 Downloads: 465 Uploads: 0	SS, thanks for the tips. I do run antilag - forgot about it, since it's not on the modlist! And it does help. Running an Dell Alienware M11X r3. 17@1.70 with 8GB and NVidia 540M. Tweaked-up mini laptop. I am mobile much of the time, so I need a very toteable machine. I use No Logo on my Sober's-based modlist. Don't need it with Schliechfahrt - load graphic is a U-boat entering the pens. And I prolly don't need the German Language Pack with Schliechfahrt. But I thought MFCM was built into Schliechfahrt, so I didn't need to add it. Am I incorrect? SH_Player. we gotta get you going! Does the stock game run OK? Have you tried any other modlists? Do you have any other mods loaded? Are you running a download from Steam?