[REL] Multiple UIs for SH5 with TDC - Page 639

Fifi · 01-15-13, 06:30 PM

Quote:

Originally Posted by volodya61

You should download NewUIs v7.2.0.. then enable this option in the Generic Patcher.. then enable this option in the OptionsFileEditorViewer and set depth.. and then.. enjoy..

Ahh...so i have to use 7.2 version finally

Pfff...have to restart career to change 7.1 to 7.2, or i can do it in bunker?

TheDarkWraith · 01-15-13, 06:42 PM

Quote:

Originally Posted by Fifi

Ahh...so i have to use 7.2 version finally

Pfff...have to restart career to change 7.1 to 7.2, or i can do it in bunker?

can do it anytime. If you want to be really, really safe do it in bunker

Fifi · 01-15-13, 06:44 PM

Awesome!

Fifi · 01-15-13, 11:25 PM

Ok, i have installed New UIs 7.2, and did all the requirements

I can run the engine of my choice (electric or diesel) by firstly (and ONLY firstly)"stopping all" then clicking one of the two little buttons between compass/fuel gauge, then ahead 1/2/3 etc...

But sometime (don't know why) doing that, my speed cursor (indicating 1/2/3 ect) is stuck on 0...but sub is still moving with prop turning!
I have to run backward for short time, and then it moves again

I also had a look in the engine room, to see if only one diesel was animated.
Both were working, even though i had selected one engine...(well that's no big deal

)
But manipulating engines controls from this engine room, each time my cursor speed is stuck on 0

And last question, do i have to map a hotkey via the New UIs filesviewer, to press before each engine selection?
(it seems to me i have readed that somewhere...)

Thanks for your reply, it's a fantastic feature

Scupper · 01-16-13, 02:54 AM

Still trying to get this mod working...

Sober, thanks for your help. I input the install path and menu.txt path and it pretty much looks the same. What do I do next, - open something?

Also, are there instructions somewhere for doing all this?

THE_MASK · 01-16-13, 03:10 AM

Click on where it says open
and then click on TheDarkWraithUserOptions

Scupper · 01-16-13, 03:32 AM

Quote:

and then click on TheDarkWraithUserOptions

And.. erm... where would those be?

Fifi · 01-16-13, 04:03 AM

In the file button (top left) clic "open..." (not "open") and follow this path:
C:/ubisoft/SH5/MODS/TDW New UIs 7.2/data/scripts/menu/TheDarkWraithUserOption.py
Then open it

Scupper · 01-16-13, 04:54 AM

Thanks Fifi, - that worked. I've got all the tabs now.

I tried a new campaign after doing this but the new GUI still isn't available. Any ideas as to what I have to do next?

THE_MASK · 01-16-13, 04:57 AM

Is this in the tutorial ?

Scupper · 01-16-13, 05:13 AM

Quote:

Is this in the tutorial ?

Are you asking me? If anyone can point me to a tutorial that deals with this I'd be very happy.

Otherwise, - what do I have to do to make it work?

Thanks.

THE_MASK · 01-16-13, 05:15 AM

No , when starting a new campaign are you playing the tutorial .

Fifi · 01-16-13, 05:19 AM

Quote:

Originally Posted by Scupper

Thanks Fifi, - that worked. I've got all the tabs now.

I tried a new campaign after doing this but the new GUI still isn't available. Any ideas as to what I have to do next?

All your changes in the file viewer has to be made without the mod activated.
At least here...i had to deactivate New UIs for changes to work and reactivate once changes made.

Scupper · 01-17-13, 03:21 AM

Quote:

No , when starting a new campaign are you playing the tutorial .

Sorry, I misunderstood. No, - I start in the bunker after completing the tutorial. I pick up the new sensor, accept the British coast mission and head out, then I raise the attack periscope, but always get the standard SH5 interface. I've also tried starting a completely new campaign, skipping the tutorial.

Fifi, - thanks for the suggestion. I tried disabling the mod and redoing the file stuff in the options file editor/viewer (see below), then re-enabling it and starting the new campaign, but ... it still doesn't work. One thing I notice, - after I close the viewer, when I open it again I just have the file menu, - not all the options tabs. Is that normal or does it suggest a problem?

I really appreciate your help.

Any other ideas?

Fifi · 01-17-13, 05:52 AM

Quote:

when I open it again I just have the file menu, - not all the options tabs. Is that normal or does it suggest a problem?

Yes it's normal. You have to open the UserFile.py each time.

On other hand, why your game is installed in programfileX86?

01-15-13, 06:44 PM	#9573
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 6,110 Downloads: 467 Uploads: 0	Awesome!

01-15-13, 11:25 PM	#9574
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 6,110 Downloads: 467 Uploads: 0	Ok, i have installed New UIs 7.2, and did all the requirements I can run the engine of my choice (electric or diesel) by firstly (and ONLY firstly)"stopping all" then clicking one of the two little buttons between compass/fuel gauge, then ahead 1/2/3 etc... But sometime (don't know why) doing that, my speed cursor (indicating 1/2/3 ect) is stuck on 0...but sub is still moving with prop turning! I have to run backward for short time, and then it moves again I also had a look in the engine room, to see if only one diesel was animated. Both were working, even though i had selected one engine...(well that's no big deal ) But manipulating engines controls from this engine room, each time my cursor speed is stuck on 0 And last question, do i have to map a hotkey via the New UIs filesviewer, to press before each engine selection? (it seems to me i have readed that somewhere...) Thanks for your reply, it's a fantastic feature

01-16-13, 02:54 AM	#9575
Scupper Swabbie Join Date: Jan 2013 Location: Auckland, New Zealand Posts: 10 Downloads: 5 Uploads: 0	Still trying to get this mod working... Sober, thanks for your help. I input the install path and menu.txt path and it pretty much looks the same. What do I do next, - open something? Also, are there instructions somewhere for doing all this?

01-16-13, 03:10 AM	#9576
THE_MASK Ace of the deep . Join Date: Jan 2006 Posts: 9,226 Downloads: 901 Uploads: 73	Click on where it says open and then click on TheDarkWraithUserOptions

01-16-13, 04:03 AM	#9578
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 6,110 Downloads: 467 Uploads: 0	In the file button (top left) clic "open..." (not "open") and follow this path: C:/ubisoft/SH5/MODS/TDW New UIs 7.2/data/scripts/menu/TheDarkWraithUserOption.py Then open it

01-16-13, 04:54 AM	#9579
Scupper Swabbie Join Date: Jan 2013 Location: Auckland, New Zealand Posts: 10 Downloads: 5 Uploads: 0	Thanks Fifi, - that worked. I've got all the tabs now. I tried a new campaign after doing this but the new GUI still isn't available. Any ideas as to what I have to do next?

01-16-13, 04:57 AM	#9580
THE_MASK Ace of the deep . Join Date: Jan 2006 Posts: 9,226 Downloads: 901 Uploads: 73	Is this in the tutorial ?

01-16-13, 05:15 AM	#9582
THE_MASK Ace of the deep . Join Date: Jan 2006 Posts: 9,226 Downloads: 901 Uploads: 73	No , when starting a new campaign are you playing the tutorial .