game setup il2

Sniper450 · 04-02-08, 07:49 PM

cant get joystick to work...got a usb saitek cyborg 3d adn dont know how to make it work with the game. Have it plugged in but isnt recognized....

CCIP · 04-02-08, 09:30 PM

you need to install the drivers that came with it.

Alternatively, go to the game's "setup" from its menu (programs => ubisoft => il-2 1946) and make sure it's set to recognize your stick as input.

Steel_Tomb · 04-03-08, 04:33 AM

Make sure you use Saitek's SST programming software too so you can create a profile for your stick. I've got the wireless version of that sucker so if you have any more problems just throw them my way and I'll try to help as best I can

.

Kratos · 04-03-08, 05:29 AM

If you go to your control panel, then game controllers,and find out if your joystick is in the list then click add.

Sniper450 · 04-03-08, 07:06 AM

when i try to add it from control panel it says that the usb for game controller is not configured. I thougth i had the SSt software loaded from a long time ago. I will double check today when I get back home. Thanks for all the help! Ill b home mid day and can check it all out.

Dowly · 04-03-08, 07:12 AM

I have the exact same problem with my Saitek Cyborg EVO. What I did to solve that is I went to the device manager (Start->Control Panel->Performance & maintenance->System->Hardware tab-> device manager) and looked under the Universal Serial Bus controllers. What was the case in my problem was that I had to disable the "Standard Enchanced PCI to USB Host controller". After doing that, it immediatly recognized the joystick.

Now, disabling it isnt permanent, if it doesnt work or you lose control of your e.g. keyboard, just enable it back.

Hope this helps!

Sniper450 · 04-03-08, 08:38 AM

Thanks Dowly! Ill try that first when I get home!!!

Sniper450 · 04-03-08, 11:44 AM

Well maybe a hardware issue with my Saitek. im gonna try it on a diff computer later today. I keep getting the yellow exclamation mark under device drivers.

Kratos · 04-03-08, 12:11 PM

Quote:

Originally Posted by Sniper450

Well maybe a hardware issue with my Saitek. im gonna try it on a diff computer later today. I keep getting the yellow exclamation mark under device drivers.

If thats in the device manager window? double click on it and go to driver, and where it says update driver, click.... and put your software disc in drive, and it should find the appropriate drivers from there.

Sniper450 · 04-03-08, 12:22 PM

"this device cannot start (code 10)" was the reply when i tried that Kratos.

HunterICX · 04-03-08, 12:32 PM

sounds like a USB issue to me,

try this out: http://www.pchell.com/hardware/usbcode10.shtml

good luck,
HunterICX

Sniper450 · 04-03-08, 12:40 PM

Im heading back to work in about 30 min and will try itin a computer there...thats where ill start.

Thanks!

Sniper450 · 04-03-08, 03:08 PM

Its the joystick...off to bestbuy on the way home!!

XabbaRus · 04-03-08, 04:57 PM

You don't have to have the SST programming software installed. I don't but it means you have to set the button config up in game.

Sniper450 · 04-03-08, 08:16 PM

ok got new saitek............now i just have to learn to fly...lol

04-02-08, 07:49 PM	#1
Sniper450 Lieutenant Join Date: Jan 2004 Posts: 251 Downloads: 177 Uploads: 0	game setup il2 cant get joystick to work...got a usb saitek cyborg 3d adn dont know how to make it work with the game. Have it plugged in but isnt recognized....

04-02-08, 09:30 PM	#2
CCIP Navy Seal Join Date: Apr 2005 Location: Waterloo, Canada Posts: 8,700 Downloads: 29 Uploads: 2	you need to install the drivers that came with it. Alternatively, go to the game's "setup" from its menu (programs => ubisoft => il-2 1946) and make sure it's set to recognize your stick as input. __________________ There are only forty people in the world and five of them are hamburgers. -Don Van Vliet (aka Captain Beefheart)

04-03-08, 04:33 AM	#3
Steel_Tomb Ace of the Deep Join Date: Mar 2007 Location: Cambridgeshire - UK Posts: 1,128 Downloads: 0 Uploads: 0	Make sure you use Saitek's SST programming software too so you can create a profile for your stick. I've got the wireless version of that sucker so if you have any more problems just throw them my way and I'll try to help as best I can . __________________ _______________________________________________ System Spec: Intel Core 2 Duo 2.4Ghz \| 4Gb Corsair XMS2 Dominator DDR2 PC-2 6400 RAM \| XFX GeForce 8800GTS 640mb PCI-E \| Creative X-fi sound card \| 250Gb HDD \| *Rest In Peace Dave, you will be missed.*

04-03-08, 05:29 AM	#4
Kratos Ace of the Deep Join Date: Apr 2007 Posts: 1,267 Downloads: 0 Uploads: 0	If you go to your control panel, then game controllers,and find out if your joystick is in the list then click add. __________________

04-03-08, 12:32 PM	#11
HunterICX Rear Admiral Join Date: May 2006 Location: Malaga, España Posts: 10,750 Downloads: 8 Uploads: 0	sounds like a USB issue to me, try this out: http://www.pchell.com/hardware/usbcode10.shtml good luck, HunterICX __________________

04-03-08, 07:06 AM	#5
Sniper450 Lieutenant Join Date: Jan 2004 Posts: 251 Downloads: 177 Uploads: 0	when i try to add it from control panel it says that the usb for game controller is not configured. I thougth i had the SSt software loaded from a long time ago. I will double check today when I get back home. Thanks for all the help! Ill b home mid day and can check it all out.

04-03-08, 07:12 AM	#6
Dowly Lucky Jack Join Date: Apr 2005 Location: Finland Posts: 25,052 Downloads: 32 Uploads: 0	I have the exact same problem with my Saitek Cyborg EVO. What I did to solve that is I went to the device manager (Start->Control Panel->Performance & maintenance->System->Hardware tab-> device manager) and looked under the Universal Serial Bus controllers. What was the case in my problem was that I had to disable the "Standard Enchanced PCI to USB Host controller". After doing that, it immediatly recognized the joystick. Now, disabling it isnt permanent, if it doesnt work or you lose control of your e.g. keyboard, just enable it back. Hope this helps!

04-03-08, 08:38 AM	#7
Sniper450 Lieutenant Join Date: Jan 2004 Posts: 251 Downloads: 177 Uploads: 0	Thanks Dowly! Ill try that first when I get home!!!

04-03-08, 11:44 AM	#8
Sniper450 Lieutenant Join Date: Jan 2004 Posts: 251 Downloads: 177 Uploads: 0	Well maybe a hardware issue with my Saitek. im gonna try it on a diff computer later today. I keep getting the yellow exclamation mark under device drivers.

04-03-08, 12:22 PM	#10
Sniper450 Lieutenant Join Date: Jan 2004 Posts: 251 Downloads: 177 Uploads: 0	"this device cannot start (code 10)" was the reply when i tried that Kratos.

04-03-08, 12:40 PM	#12
Sniper450 Lieutenant Join Date: Jan 2004 Posts: 251 Downloads: 177 Uploads: 0	Im heading back to work in about 30 min and will try itin a computer there...thats where ill start. Thanks!

04-03-08, 03:08 PM	#13
Sniper450 Lieutenant Join Date: Jan 2004 Posts: 251 Downloads: 177 Uploads: 0	Its the joystick...off to bestbuy on the way home!!

04-03-08, 04:57 PM	#14
XabbaRus Navy Seal Join Date: Sep 2001 Posts: 5,330 Downloads: 5 Uploads: 0	You don't have to have the SST programming software installed. I don't but it means you have to set the button config up in game. __________________

04-03-08, 08:16 PM	#15
Sniper450 Lieutenant Join Date: Jan 2004 Posts: 251 Downloads: 177 Uploads: 0	ok got new saitek............now i just have to learn to fly...lol