Quote:
Originally Posted by Onkel Neal
I bought 2 of these Akula models so this is a practice run!  |
You've figured out how the Pros do it.
One trick for P/E is figuring out what type of glue to use and when to use it.
CA glue is not the ideal solution. It crystalizes when it cures which results in a bond that looks permanent but really isn't. Apply enough force to the glue joint and the bond will fail quickly causing the P/E to "ping" away and fall into The Carpet of Eternity.
Your other option is to recognize that you're gluing metal to plastic which never forms a true bond. Acrylic-based glues are a good option as long as you realize that the P/E-to-plastic joint will
always be weak. Open a jar/pot of acrylic paint and you'll understand why these glues are effective. The acrylic part forms a fairly hard and solid mass once it cures. Add that notion to your tool kit.
The best way to glue P/E metal parts to each other is solder and heat. This process is extremely "fiddly" and does nothing when you want a bond between metal and plastic or resin.
So, you need to get creative.
Recognize that P/E is going to be a hassle. Do you really need to use it? I've had some luck using CA glue to "tack" the P/E to plastic then using an acrylic type glue (even the Tamiya "clear" acrylic paints can make a good glue) as the main part of the glue joint. If possible, a pin vise with a small drill bit and a shirt/sewing pin can make that glue joint much stronger.
The pin acts like a nail plus the glue joint is much larger and spread out.
We should also touch on two part epoxy. This
should be the best alternative for bonding metal to plastic. The problem is that even the thinnest liquid epoxies start out as two puddles of goop and get mixed together into one large puddle of goop. Epoxy does not shrink as it cures, like acrylics do, so whatever winds up on your model is going to stay there.
This does bring up an idea that is totally impractical, but I have thought about it.
Clear coat. In the car modelling world, two part or "2K" clear coats are all the rage. This is basically a two part, extremely thin epoxy that cures super clear and glossy.
Along those same lines would be "dental bonding agent". This is the clear water-like fluid that cures when exposed to concentrated UV light. Eight million dentists can't be wrong.
This stuff bonds metal, hybrid resins, porcelain, what ever, to tooth enamel.
It also has to last in a fairly hostile environment for many years. UV bonding agent was all the rage with airplane modelers for a couple of years (gluing the clear canopy parts to the fuselage) before things went quiet.
