Quote:
|
Originally Posted by ivank
|
You know how you can tell it's not done....it doesn't work.  It should show up in a single mission but it doesn't.
two things I noticed immediately, in the roster .cfg file you have Unittype=11. If you look at the other subs they are type 200. Change that, it has to be a sub.
In the sim file you have 10 torp tubes, in your .dat there is only one. And each tube has an inner door and an outer door (at least on the sub you used). You only have the outer door, if you are only going to use one (the cap on the tube itself) it must be the inner door. In this case door02. (some subs don't have outer doors) and that has to be the same in the upc too. Also I didn't check the storage, if it has storage in the sim it should be the same in the upc.
Try those changes, enable it and see if it shows up in a single mission as playable.
Peabody
__________________
System Spec: Gigabyte GA-965P-DS3, PentiumD Dual Core Presler 945 3.4Ghz, Gigabyte Geforce 7600GS, 2-1GB Corsair XMS2 800Mhz in Dual Channel, 2-WD 250 SATA 3Gb/s, Onboard Realtek HD 7.1 Audio, DVD ROM, DVD burner, Hiper 580 Watt Power supply, WinXP SP2.
|