Hi SW
I recommend that you use Rockin Robbins YouTube Dick O Kane tutorial.
It is very easy to understand and explains easily what you need to do.
This is what I do f.or easy manual targeting.
Get the targets speed and course.
Take up a 90 degree position to the targets course line.
Take up a position 800 to 1000 yards away.
0 or 360 degrees periscope bearing = 90 degrees AOB.
15 or 345 degrees periscope bearing = 75 degrees AOB port or starboard.
Get the targets speed and then enter into the TDC pressing the button twice.
On the range pull the plastic bearing marker fully down, it will show 1241 yards and enter into the TDC pressing the button twice.
The range is not important on a 90 degree fast shoot but a range still needs to be entered in the TDC.
Place the periscope at 15 or 345 degrees and enter 75 AOB degrees port or starboard into the TDC pressing the button twice..
When entering TDC data always press the button twice.
While you are waiting set up your torpedoes.
Contact > Fast > Depth 10 unless you know the targets depth.
Make sure the tube doors are open (Q key), or you will miss.
Use the W key to move/cycle to the next torpedo if firing more than one.
The firing position is 15 or 345 degrees as the target enters it.
Peter
|