SUBSIM Radio Room Forums

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)
-   PC Hardware/Software forum (https://www.subsim.com/radioroom/forumdisplay.php?f=235)
-   -   ATI CCC.. whered my overdrive go? (https://www.subsim.com/radioroom/showthread.php?t=171546)

SteamWake 06-25-10 05:00 PM

ATI CCC.. whered my overdrive go?
 
Okay before you begin harping on riva tuner I have tried it but prefer CCC okay ;)

Recently upgraded my install of CCC and diligently un-installed the previous drivers.

Two things ..

First the hardware is identified as a [H190L] in CCC but displayed properly as a HD4650 in device manager. Performance has been acceptable for now.

Second the 'ati overdrive' is no where to be seen. :stare:

I did a little web searching on the issue but found confusing conflicting information.

Arclight 06-25-10 05:53 PM

Overdrive is disabled for cards that dont have a temperature sensor. My guess would be the driver/CP is not identifying the card properly and/or not picking up the sensor.

I'd say either wait for a hotfix or use ATI Tray Tools for the time being (if that still exists :lol:).


Might wanna keep an eye on what the fan does during gaming. If the software is indeed not picking up on the sensor, it's possible the fan will not be controlled either. You'd get the same situation as with a recent Nvidia driver that ended up damaging cards because of it. :hmmm:

frau kaleun 06-25-10 08:51 PM

Hmm... I've got the same card and CCC as well.

Haven't checked for updates on CCC in a while, I know I did it when I first got this rig last fall and again at least once since then. Was this a recently released driver update? Maybe I should forgo updating for the time being if that's the case. I'm not having any problems with what I've got right now.

Gerald 06-25-10 09:02 PM

ATI Tray TOOLS..
 
Quote:

Originally Posted by Arclight (Post 1428310)
Overdrive is disabled for cards that dont have a temperature sensor. My guess would be the driver/CP is not identifying the card properly and/or not picking up the sensor.

I'd say either wait for a hotfix or use ATI Tray Tools for the time being (if that still exists :lol:).


Might wanna keep an eye on what the fan does during gaming. If the software is indeed not picking up on the sensor, it's possible the fan will not be controlled either. You'd get the same situation as with a recent Nvidia driver that ended up damaging cards because of it. :hmmm:

Exists.yes,,but try CPU-Z if CCC cant help you....:up:

Kaleun 06-26-10 05:42 AM

hi,

I have a 4890 have have found "quirks" with CCC not functioning correctly when updating drivers (so i'm still running 09.11) - my advice is to; uninstall everything and update the CCC as well as the driver (there is full driver package on the driver download page)

I believe AMD/ATI only recommed a CCC version 2 driver updates old.

hope this helps

Kaleun

SteamWake 06-26-10 07:24 AM

Well updating the drivers and CCC is what got me here in the first place.

The previous version 9.xxx had the overdrive but when I updated to 10.xxx (after removing the previous drivers) the overdrive went away.

I updated due to the fact that the previous version was having some issues (VPU recovery) after playing some games for a while. The new version fixed that issue but now no overdrive.

As to the gpu fan there is no real way to tell what its doing thats actually the main reason I want the overdrive.

Oh and to Frau.... If it works dont fix it ;)

frau kaleun 06-26-10 07:27 AM

Quote:

Originally Posted by SteamWake (Post 1428625)
Oh and to Frau.... If it works dont fix it ;)

Always the best policy IMO. :up:


All times are GMT -5. The time now is 10:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.