[REL] Input Target Distance on TBT (ready for 1.2patch)
 

--Clickable target distance dial--
Hi all,
Wanna directly move TARGET DISTANCE DIAL instead of TAGET MAST HEIGHT DIAL on the attack data tool?
I found the way, its piece of cake.

Open the file \Data\Menu\cfg\Dials.cfg
Just only add or delete semicolon at each top of 4 lines and change 1 value,
OR copy and paste following description
--------------------------------------------------------------------------------
[Dial58]
; will be changed by code
Name=TorpedoSolution_Mast_Height
Type=70; DIAL_TGT_MAST_HEIGHT_INTERNATIONAL
;Cmd=Set_tgt_mast_height_international; <--- add semicolon
Dial=0x431A0002
CrtVal=0x431A0001
NewVal=0x0
DialVal=-90,98
RealVal=15,130; height
Circular=Yes
;CmdOnDrag=Yes; <--- add semicolon
Logarithmic=7.189;4.656
;RelativeDrag=Yes
;SndStep=5
;SndList=1,Menu.TDC.AngleOnBow,360
[Dial59]
; will be changed by code
Name=TorpedoSolution_Temporary_Range
Type=68; DIAL_TGT_RANGE
Cmd=Set_tgt_sel_value; <--- delete semicolon
Dial=0x431A0001
CrtVal=0x431A0003
NewVal=0x0
;DialVal=10,0 <--- add semicolon
DialVal=17,0 <--- change value (*)
RealVal=11000,220; range
Circular=Yes
CmdOnDrag=Yes; <--- delete semicolon
Logarithmic=-0.98;51.0
RelativeDrag=Yes <---delete semicolon (edit:fix for mouse point problem)
;SndStep=5
;SndList=1,Menu.TDC.AngleOnBow,360
--------------------------------------------------------------------------------
That's all!

JSGME compliant file (for patch1.2)
http://rapidshare.com/files/26509790...forPatch12_.7z

note:
*I have measured the degree. but if you feel complaint about the result (=distance value), please adjust DialVal from15to20.
*Check mark of RECmanual (TAGET MAST HEIGHT) funcion normally, dont worry about it.
*If you install any mod using Dials.cfg already. Please edit the file by yourself.
*Any modders can use or arrange this method without my permission, if you want.

cheers,:D
sorry for my poor English.


(edit)
I notice that mouse point problem can solve with delete semicolon at above PINK colour line.
So I have replaced the DL file..

:sunny: Nice find! When doing a true manual TDC, it was frustrating not being able to input directly the range data for a ship beyond ~1500 yards without dancing around the frigging must lock a ship stadimeter work around.

Thank you!

Superb!!! Just made a submerged attack using the periscope to point to bearing, the sonar to estimate range and the manual dialing to send the range to the TDC.

It works, I hit em!!! One at very long range!!

redy for 1.2 patch
 

Dials.cfg file has be changed by 1.2 patch, but editing part of this MOD is not change.
Thus I only replace DLfile link, and leave ReadmeFile and topic description as it is.

http://rapidshare.com/files/26509790...forPatch12_.7z

Cheers,

Here's a JSGME-ready version of the above mod. It also uses Jimimadrid's excellent JTxE for installation. It should work with any other mod on any version of SH4.

Installation instructions:

1. Unrar to your MODS-folder
2. Enable in JSGME
3. Run JTxE.exe from your SH4 root folder and enable the mod

Uninstallation is done in reversed order, ie. first disable it from JTxE


Download here

Can the range still be inputted using the stadimeter with this mod or is it strictly manual range inputs, now?

Stadimeter still works as before

Great fix I have had several situations where I wnated to do this. thanks

If I wanted to do this manually, would I edit the Data\Menu\cfg\Dials.cfg file as illustrated in the initial post?

Yep, just follow ottos' instructions and you'll be fine. Even though it says 1.2 it works fine in both 1.4 and 1.5 if you do it manually or use JTxE.

Great, thanks!!

I tried the mod and found that the index marker was stuck in one position on the mast height dial. So I fiddled with the settings in both sections (Dial58/59) without much luck until I finally decided to see what happens if I enabled both. Turns out it can be done.

This is what I did:
Now, I can input any range to the TDC and also adjust the mast height by doing this:

• Drag index marker (outer dial) full left.
• Rotate inner dial counter-clockwise to desired range.
• Send range to the TDC.

Enabling “RelativeDrag” makes it possible to manipulate the two dials accurately. Also, the stadimeter still works ... and I feel like I’m using it as intended: measuring mast height.

:up: Thanks for pointing me in the right direction.

Could some of you post the original values for those two sections ?

I have lost my original dials.cfg file and can not make it work. Neither the new modification nor the original that lets you slide the mast head height

Here is my settings now:

[Dial58]
; will be changed by code
Name=TorpedoSolution_Mast_Height
Type=70; DIAL_TGT_MAST_HEIGHT_INTERNATIONAL
Cmd=Set_tgt_mast_height_international;
Dial=0x431A0002
CrtVal=0x431A0001
NewVal=0x0
DialVal=-90,98
RealVal=15,130; height
Circular=Yes
CmdOnDrag=Yes
Logarithmic=7.189;4.656
;RelativeDrag=Yes
;SndStep=5
;SndList=1,Menu.TDC.AngleOnBow,360

[Dial59]
; will be changed by code
Name=TorpedoSolution_Temporary_Range
Type=68; DIAL_TGT_RANGE
;Cmd=Set_tgt_sel_value;
Dial=0x431A0001
CrtVal=0x431A0003
NewVal=0x0
DialVal=10,0
RealVal=11000,220; range
Circular=Yes
;CmdOnDrag=Yes
Logarithmic=-0.98;51.0
;RelativeDrag=Yes
;SndStep=5
;SndList=1,Menu.TDC.AngleOnBow,360

[Dial58]
; will be changed by code
Name=TorpedoSolution_Mast_Height
Type=70; DIAL_TGT_MAST_HEIGHT_INTERNATIONAL
Cmd=Set_tgt_mast_height_international;
Dial=0x431A0002
CrtVal=0x431A0001
NewVal=0x0
DialVal=-90,98
RealVal=15,130; height
Circular=Yes
CmdOnDrag=Yes
Logarithmic=7.189;4.656
;RelativeDrag=Yes
;SndStep=5
;SndList=1,Menu.TDC.AngleOnBow,360

[Dial59]
; will be changed by code
Name=TorpedoSolution_Temporary_Range
Type=68; DIAL_TGT_RANGE
;Cmd=Set_tgt_sel_value;
Dial=0x431A0001
CrtVal=0x431A0003
NewVal=0x0
DialVal=10,0
RealVal=11000,220; range
Circular=Yes
;CmdOnDrag=Yes
Logarithmic=-0.98;51.0
;RelativeDrag=Yes
;SndStep=5
;SndList=1,Menu.TDC.AngleOnBow,360

Now THAT is strange. I have the correct Dial settings, but still can not turn the mast height indicator at all. Its stuck at 64 somehow.....