SUBSIM Radio Room Forums - LIVING SILENT HUNTER 3 - EDITION 2020

Page 13 of 25

Show 20 post(s) from this thread on one page

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)

- SHIII Mods Workshop (https://www.subsim.com/radioroom/forumdisplay.php?f=195)

- - LIVING SILENT HUNTER 3 - EDITION 2020 » Discussion and Support (https://www.subsim.com/radioroom/showthread.php?t=247796)

VONHARRIS

04-25-21 10:04 AM

Quote:

Originally Posted by Sangamon Taylor (Post 2744343)

Hello Kaleuns -

1. The HSIE patches don't all seem to be working. After installation the HSIE Options Selector reported only a few of the possible patches were activated. I have tried activating more of them and some are working and some are not. The Oxygen Fix does not work as advertised. I have run my boat completely out of oxygen and the CE reports that we are out of oxygen and must surface, but I see no distinction between renewable and non-renewable. Also the Periscope Fix isn't working. I can cruise along at 8 knots in a Type VIIB and the image is completely clear and the periscope stays up. I was also able to reload external torpedoes on the surface with 15 k/s winds, fog and rain. The fixes that came pre-installed all seem to be working.

Any ideas what's happening?

2. Is there any way to remove that annoying orange marker on the surface when the boat is submerged? It seems to have been added to SH3 from FOTRSU and was one of the reasons (along with the colored contacts) for my abandoning FOTRSU. (And thanks for including a MOD to make the contacts all black).

Thanks in advance for any advise. :Kaleun_Salute:

For No1
Go to the mods folder of your LSH3 2020 installation and find the LSH3 2020 HSie patch mod
Open it and run the selector within the mod and activate whatever you want
Close everything and activate the LSH3 2020 HSie patch mod with JSGME
All done

For No2
I don't know , I want the same as well .

Fifi	04-25-21 10:10 AM

For N°2, deleting the UMark tga in Data/Misc should do it.
But best is to play just with event camera on...this way no orange UMark and no need for black contacts, a lot more immersive :)

La vache

04-25-21 11:21 AM

Quote:

Originally Posted by VONHARRIS (Post 2744289)

I would like to ask if there is or isn't any traffic in the Indian Ocean in LS3 2020.
It is June 1943 game time , and I just enter into the port of Durban (hostile) in SE Africa which was empty.
Also I haven;t found any ship or plane on the way either.
I have checked in the LSH3 2020 manual but I came up empty handed.
Am I missind something?
Thank you in advance.

I found traffic in the Indian Ocean so everything is in order.
The empty port remains a mystery

There is traffic in the Indic but no harbor traffic, except in Colombo. No mystery, no content.

Sangamon Taylor

04-25-21 03:11 PM

Quote:

Originally Posted by VONHARRIS (Post 2744351)

Thank you! That worked!:Kaleun_Salute:

And for N°2, deleting the UMark tga in Data/Misc does it.

Sangamon Taylor

04-28-21 10:23 PM

Where is the chart with the flags of all nations on it?

I've searched and can't find it.

TIA

Bob Idit

04-28-21 11:24 PM

Stuck with a mess.

Installed ARB WideGui 1920x1080 v0.3.1 and its just great, it makes the game feel playable again after all these years. Problem is I have a map thats split in two and just a mess I can make no sense of it, when I look for information it seems Im not alone but I am unclear how to fix it.
This is a steam version of the game and from what I have read its been said [S3H]_SH3-H.sie_V16B1-Patch-Kit should be installed first but when I downloaded that file there was a ton of other files and no install instructions. Can anyone advise? am I doing the right thing how should I procced?
Thanks for your help.:arrgh!:

borknagor

05-02-21 04:28 AM

Installation troubles

Hello,
I downloaded the Mod LSH3 2020, but somehow I cannot install it. Clicking the installation file the smart screen pops up, I clicked "run anyway" but then the error message "could not create folder ".". Access denied" appears.
I have clean installed SH3 from uplay on this location "C:\SH3"
also tried "C:\SilentHunter3" no luck with both of them. I also deactivated every Windows Security, run as administrator, gave the exe all the rights possible... still no luck.

I am running Windows 10.
Any help on this would be awesome. Thank you very much.

Urmel

05-05-21 09:58 AM

Hello L/SH3 friends

We are sorry that some players cannot install Supermod "LSH3-Edition-2020".

Those who have an official UBI license for SH3 can install Supermod "LSH3-Edition-2020" for free.

This applies to ALL SH3 purchasers (from SH3-DVD, SH3-UPLAY, SH3-STEAM or SH3-AMAZON)!

Here are the EXACT installation instructions for a "quick" LSH3 installation:

1. first create a NEW folder yourself, with name "SilentHunter3" (no matter where).

2. start the loaded LSH3-2020-file "LSH3-2020-INSTALLATION.EXE" (as Administrator)

3. select (in the installation programme) your new folder "SilentHunter3" as "SH3 ORIGINAL FOLDER"!

After that, the LSH3 installation will run optimally.

5. pay attention to all further questions in the LSH3 installation program for a successful installation.

More LSH3 support here or individual at support@lsh3.com.

Thank you, please stay healthy and greetings, Urmel ��

Urmel

05-05-21 10:41 AM

Information for L/SH3 players and valued old and new SH3 modders:

We strongly recommend to play the supermod "LSH3 Edition 2020" in "original state" first!

First test out what is already built in and activated in LSH3 (example: HSIE and TYCHO patch).

Or also which LSH3 add-on mods (via LSH3-2020-MODARCHIVE) can be switched on.

Information for all "old" esteemed SH3 modders:

Our supermod "LSH3 Edition 2020" is NOT compatible with GWX 3, WAC XX or the last version CCOM 12.x!

Until today there is no V20 Full-HD-GUI, nor any other V20 add-on mod, which work properly (!).

We appreciate all modder work done for "LSH3 Edition 2020/21".

Please write us here (or to urmel@lsh3.com) if we can verify new work for "LSH3 Edition 2021".

At the moment the LSH3 team is working hard on the new LSH3 version Full-HD-2021.

Thanks and greetings, Urmel

Fifi	05-11-21 02:12 AM

Would be nice to be able to get rid of Fumb-1 Metox once installed...
It seems that once we have bought the Biscaye Cross, we can’t de-install it later on :hmmm: like they did when it was become useless...
It should be doable at base in the equipment page...

On side note, it seems it’s like that in any other megamod!

:Kaleun_Salute:

dex	05-11-21 04:55 AM

VIIB SUB

I m in decem.1939 and I have not recivied new sub,maybe someone know something....
Only IIa mini sub is available

Fifi	05-11-21 05:05 AM

Quote:

Originally Posted by dex (Post 2747183)

I m in decem.1939 and I have not recivied new sub,maybe someone know something....
Only IIa mini sub is available

I think you have to go to the training flotilla to get new subs! :yep:

dex	05-11-21 06:15 AM

about new sub

Quote:

Originally Posted by Fifi (Post 2747184)

I think you have to go to the training flotilla to get new subs! :yep:

Hmmmm strange,why not in Wilhelmshaven.... ok I try training flotilla...
I must every time change flotilla if i will to buy new sub?

Fifi	05-11-21 06:28 AM

Quote:

Originally Posted by dex (Post 2747193)

Hmmmm strange,why not in Wilhelmshaven.... ok I try training flotilla...
I must every time change flotilla if i will to buy new sub?

Yes always first in training flotilla when new sub (as it was in real - and in real, could take many month of training!)

dex	05-11-21 07:27 AM

About new sub

Quote:

Originally Posted by Fifi (Post 2747197)

Yes always first in training flotilla when new sub (as it was in real - and in real, could take many month of training!)

Thanks Fifi...by the way your mods are excellent(enhancements,waves,bright nightsDgui.....)

Fifi	05-12-21 01:10 PM

May 1943, Biscaye bay...excellent job with the planes!
From Brest or St Nazaire, crossing Biscaye Bay is challenging :up:
Even at night.
As far as i play no more than X256 though. More than X256, almost all planes are skipped...(at least on my computer - known SH3 issue)

:Kaleun_Salute:

Anvar1061

05-12-21 02:23 PM

Quote:

Originally Posted by Fifi (Post 2747443)

X256

#256
The Magic of Numbers.

Sangamon Taylor

05-13-21 10:21 PM

Quote:

Originally Posted by Sangamon Taylor (Post 2744970)

I've searched and can't find it.

TIA

I found them.

melis

05-16-21 11:52 AM

Greetings everyone!First of all, I want to offer my sincere congratulations to the creators of the mod. You guys are amazing! This mega modification works very well on my old laptop Samsung RC530. However, I would like to ask you why at periscope depth, destroyers are not able to track me, they do not ping at all. In 1944, it seems to me that such a situation should not occur. Being at periscope depth, I am practically invisible

Fifi	05-16-21 12:44 PM

Quote:

Originally Posted by melis (Post 2748087)

2 first easy fix with notepad++

- In LSH3 Commander/Cfg/Randomised Events, delete the whole section about thermal layer...it is screwing up AI sensors, becoming almost deaf.

- In Data/Campaigns/Campaign/SCR & RND file, change all crew rating =1 & =2 to =3...
Don’t worry, with Notepad++ it is doable in 15 seconds...if you know how to use it.

Then, you would have to make some changes in Data/Library/Ai Sensors.dat using S3D application.
Opening all Sonars nodes and Hydrophone node, and changing their max heigh to -10 (instead of -15 so they can detect you at periscope depth) or even to 0!

Reducing the noise factor to 0.2 of hydrophone and Sonar in Cfg/Sim file helps also.

There are plenty ways to make LSH3 more challenging in my opinion.
I did it for myself, and result i have never passed 1943...often destroyed by planes when playing no more than X256.

All times are GMT -5. The time now is 06:14 AM.

Page 13 of 25

« First

Last »

Show 20 post(s) from this thread on one page