SUBSIM Radio Room Forums

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)
-   SHIII Mods Workshop (https://www.subsim.com/radioroom/forumdisplay.php?f=195)
-   -   LIVING SILENT HUNTER 3 - EDITION 2020 Discussion and Support (https://www.subsim.com/radioroom/showthread.php?t=247796)

ericlea 12-24-2020 11:40 AM

Thank you very much for LSH2020 !
:Kaleun_Salute::Kaleun_Cheers::Kaleun_Applaud:

blackswan40 12-24-2020 12:40 PM

LSH2020 Granville Tonnage mismatch
 
LSH2020 Granville Tonnage mismatch

In the Museum the Granvile Freighter has a Tonnage of 4650tons but in the
Id book its listed as 2010tons

https://www.subsim.com/radioroom/pic...ictureid=11699

https://www.subsim.com/radioroom/pic...ictureid=11695

Quick fix go to the Data Folder then the Sea Folder scroll down the Folders untill you come to NGRA open up the Folder then open up the NGRA Config then change the Tonnage to 4650 then save and close the folder Job Done

https://www.subsim.com/radioroom/pic...ictureid=11703

https://www.subsim.com/radioroom/pic...ictureid=11696

zakarpatska 12-24-2020 01:20 PM

Thanks so much to LSH3 team for this mod! A great gift for the holidays!

ryoga_77 12-24-2020 01:40 PM

Training Game Paused and Career game crash
 
1 Attachment(s)
Thank you all for your help.

The installation problem was due to the fact that the installation folder was not named Silenthunter3.

LSH 2020 installed without further issues and the Nvidia settings were used as instructed.

Game loaded and i tried running a training mission.

The game display showed the game as being paused and no matter which time compression key i used it stayed paused (See screenshot).

I tried going out on patrol in career mode and whilst the game did start loading it exited to windows after a short while.

Any ideas on what i might have done wrong?

Darthlucky 12-24-2020 05:09 PM

Screen too wide for my laptop
 
I'm at a total loss as to how to figure out what type of video card I have, and then how to fix the screen so that the "start" buttons are visible, I can see probably about 90% of the screen, but it cuts off where I would need to click to start a training mission or career. I have a HP Pavillion dv7 laptop running WIN10

blackswan40 12-24-2020 05:28 PM

Hi Darthlucky maybe you can upgrade your graphics drivers check this hp link out
you can change the country/region default is United Kingdom uk on the bottom of the page.



https://support.hp.com/gb-en/drivers/laptops

blueduck 12-24-2020 06:21 PM

Quote:

Originally Posted by blackswan40 (Post 2715974)
… then i made a second one called LSH2020-MULTIPLAYERMISSIONS and all works well.

To play the Single/Multiplayer Missions you have to copy n paste them from the mod archive folder into your Mods folder then activate them through JSGME.

Hi blackswan40,

we have thought of making copy and paste easier and have provided the LSH3-2020 MODARCHIVE MANAGER.
https://www.lsh3.com/ftp/blueduck/su...VE-MANAGER.png
It is included as a shortcut in the desktop folder.
Start it, select the mod or mods and click copy - JSGME will start automatically.

See page 16 in the LSH3-EDITION-2020-INSTALLATION_EN.pdf for more Information about LSH3-2020-MODARCHIVE-MANAGER.

Regards
Blueduck

blackswan40 12-24-2020 06:28 PM

sweet thankyou blueduck

Mad Mardigan 12-24-2020 06:51 PM

Re: Game paused... fix...
 
Quote:

Originally Posted by ryoga_77 (Post 2716032)
Thank you all for your help.

The installation problem was due to the fact that the installation folder was not named Silenthunter3.

LSH 2020 installed without further issues and the Nvidia settings were used as instructed.

Game loaded and i tried running a training mission.

The game display showed the game as being paused and no matter which time compression key i used it stayed paused (See screenshot).

I tried going out on patrol in career mode and whilst the game did start loading it exited to windows after a short while.

Any ideas on what i might have done wrong?

Ahoy, ryoga_77... :Kaleun_Cheers:

This is caused by a corruption of the main.cfg file in either the SH3 folder in My Documents or the main.cfg file in SilentHunterIII/data/Cfg. What usually happens is this section is missing in one of them.

[TIME COMPRESSION]
TimeStop=0
RealTime=1
LandProximity=128
CriticalDamage=1
CrewEfficiency=1
AirEnemyDetected=1
SoundEffects=2
CharacterAnim=4
EnemyDetected=8
RadioReport=8
Particles=32
PrayState=8
HunterState=32
3DRender=32
Maximum=1024


Check both & copy/paste in the [TIME COMPRESSION] section above then save the main.cfg file that is missing that info...

M. M.

:Kaleun_Salute:

blueduck 12-24-2020 07:05 PM

Quote:

Originally Posted by blackswan40 (Post 2716013)
LSH2020 Granville Tonnage mismatch

In the Museum the Granvile Freighter has a Tonnage of 4650tons but in the
Id book its listed as 2010tons

https://www.subsim.com/radioroom/pic...ictureid=11699

https://www.subsim.com/radioroom/pic...ictureid=11695

Quick fix go to the Data Folder then the Sea Folder scroll down the Folders untill you come to NGRA open up the Folder then open up the NGRA Config then change the Tonnage to 4650 then save and close the folder Job Done

https://www.subsim.com/radioroom/pic...ictureid=11703

https://www.subsim.com/radioroom/pic...ictureid=11696

Hi blackswan40,

we got this ship from AG124/Rowi and did not change anything to the original.

Please do not mix GRT (volume) and tons (weight).
Museum says GRT and the Displacement is in tons (not GRT as to read), afaik there is no formula to calculate them vice versa..

The changes you suggest are just cosmetics, though the ship itself still will have a mass of 2325 tons.
Museum gives a length of 78.3m and the cfg-file of 92m. Maybe AG124 kann tell about the different values.

I will not change anything to that ship unless I can have a look at a plan or maybe the Lloyds Register Excerpt of this ship.

Regards
Blueduck

Flyfinn 12-24-2020 07:21 PM

TXH LSH3 team for this awesome mod! 2020 mod working first try.. Paypal gift coming any day..:Kaleun_Applaud:

Mad Mardigan 12-24-2020 07:36 PM

Re: Granville & GRT...
 
Quote:

Originally Posted by blueduck (Post 2716100)
Hi blackswan40,

we got this ship from AG124/Rowi and did not change anything to the original.

Please do not mix GRT (volume) and tons (weight).
Museum says GRT and the Displacement is in tons (not GRT as to read), afaik there is no formula to calculate them vice versa..

The changes you suggest are just cosmetics, though the ship itself still will have a mass of 2325 tons.
Museum gives a length of 78.3m and the cfg-file of 92m. Maybe AG124 kann tell about the different values.

I will not change anything to that ship unless I can have a look at a plan or maybe the Lloyds Register Excerpt of this ship.

Regards
Blueduck

https://www.subsim.com/radioroom/sho...57&postcount=8

So, if the Wikipedia article is correct, the GRT tonnage used in Silent Hunter is just the cargo spaces of the ship. In actuality if the ship tonnage was worked out in more modern GT tonnage, they'd be 3 or 4 times heavier at least. It makes the huge gap between modern and WWII sizes seem a lot closer. quoted from the linked post above.

To which I have to agree...

In original form as is, the NGRA's GRT for it, should at least be 2, 2.5, if not 3 x's what it is listed as in the .cfg file for it.

And, this is not taking into account, is that just the ships dead weight figure... or not accounting for a ship when sunk, of the additional tonnage of the cargo it was carrying.... :hmmm:

That's just my thoughts on it... not to mention if there are not other ship files short on tonnage as they should have...

M. M.

:Kaleun_Salute:

dark270 12-24-2020 11:50 PM

REALLY enjoying the game, well done!

blackswan40 12-25-2020 01:41 AM

Re Granville Freighter


https://www.wrecksite.eu/wreck.aspx?15852

https://www.subsim.com/radioroom/pic...ictureid=11705

Anvar1061 12-25-2020 02:58 AM

https://uboat.net/media/allies/merch...ex-tabarka.jpg
https://uboat.net/allies/merchants/ship/2784.html


All times are GMT -5. The time now is 10:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 1995- 2022 Subsim®
"Subsim" is a registered trademark, all rights reserved.