SUBSIM Radio Room Forums - [REL] Multiple UIs for SH5 with TDC

I had that problem. I think it disappeared after I disabled decks awash patch from TDW exe patcher. You also have to set "Is decks awash patch installed" to False in the options file of TheDarkWraithUserOptions.py

THEBERBSTER

01-14-14 06:28 AM

Yes, already did that.

Raven_2012

01-14-14 01:43 PM

There is also one in the TDW Generic patcher, if you use version 1.0.149.0. I forget deck awash there is ~7.5, which matches Speech Recognition. And there is one in NewUI you have to enable to, but I assume you enabled them both

I will see if I can use my binos at decks awash.

Quote:

Originally Posted by THEBERBSTER (Post 2163685)

Yes, already did that.

THE_MASK

01-14-14 03:05 PM

Quote:

Originally Posted by THEBERBSTER (Post 2163560)

Anybody had a problem not being able to use binoculars when at "Decks Awash"?

You cannot use binos in decks awash . You shouldn't get any sighting reports in decks awash either . So use with caution . Its not a bug . That's the way it is or you would use it all the time .

Raven_2012

01-16-14 10:32 PM

OK, show me how you did this?

Quote:

Originally Posted by vdr1981 (Post 2141920)

OK, I've found it...

Modified Page layout.ini will do the trick...

http://s6.postimg.org/sgcneqtbl/SH5_...7_14_22_38.jpg

If anyone else want to try this, just let me know...:03:

archer9

01-17-14 06:48 AM

I would like to know that as well.

archer9

01-17-14 09:48 AM

Quote:

Originally Posted by sober (Post 2163817)

You cannot use binos in decks awash . You shouldn't get any sighting reports in decks awash either . So use with caution . Its not a bug . That's the way it is or you would use it all the time .

But we can still use the UZO, right? It's just a minor inconvenience, forcing us to click on the UZO instead of using mouse wheel to quickly zoom in. I don't see the point of disabling binos at all.

On the topic of Decks awash, when I click the order, the bow of my sub is a bit higher than the stern. You can see it sticking out of the water:
http://i.imgur.com/PBDiCnA.png?1

Does anyone else have that problem?

THEBERBSTER

01-17-14 01:23 PM

Does not make sense to change it to "False"

The prompt in the Option File Editor "Is Patch Decks Awash Installed" default is "False" So surely to enable "Decks Awash" it has to be "True"

The default depth in the Option File Editior is 7.00 in Speech Recognition it is 7.50

vdr1981

01-18-14 02:37 PM

Quote:

Originally Posted by Raven_2012 (Post 2164525)

OK, show me how you did this?

http://www.subsim.com/radioroom/down...o=file&id=4250

Or if you use New UI's test v7.5.0 test version 12...

http://www.subsim.com/radioroom/down...o=file&id=4248

Raven_2012

01-18-14 05:53 PM

Thanks! I found it last night, came across it by accident.

By the way where can I get NewUI 7.5.0 test version 12? Last I checked, the downloaded version was version 5. But honestly I will wait until official version is out, I just migrated from 6_9_0 to 7_4_2 so that was a leap forward.

Quote:

Originally Posted by vdr1981 (Post 2164998)

http://www.subsim.com/radioroom/down...o=file&id=4250

Or if you use New UI's test v7.5.0 test version 12...

http://www.subsim.com/radioroom/down...o=file&id=4248

Mikemike47

01-18-14 06:55 PM

Quote:

Originally Posted by vdr1981 (Post 2164998)

Or if you use New UI's test v7.5.0 test version 12...

http://www.subsim.com/radioroom/down...o=file&id=4248

Quote:

Originally Posted by Raven_2012 (Post 2165092)

By the way where can I get NewUI 7.5.0 test version 12?

I have posted about version 12 and page update at bottom of this post:
Multiple Uis Test version 7.5, version 12 and Page update patch links

Raven_2012

01-19-14 12:26 AM

Found it, going to bump up thread so when I'm on my pc I can download it.

Quote:

Originally Posted by TheDarkWraith (Post 2099328)

Added versions 1 & 2 to new test version

See below in new test version

Still have to look into this :hmmm:

Sounds like a perfect thing for Automation, a new automation command :hmmm:

.NET 3.5

Can you explain this in more detail :hmmm:

I posted a fix for this. Did it work for you? I never heard a response back from you. The fix is also included in new test version below.

You can either use the OptionsEditorViewer app to set the option for item notes enabled or you enable the item notes in the extended top right bar (click the icon to enable/disable) in game

All shafts are working correctly. The speed slider only shows for one of the engines (stock game config). I'm working on something that will allow you to select the speed of each engine using dual sliders (one for each shaft) :up:

v7.5.0 test version 12 released. Available here: http://www.mediafire.com/?52pr5d581wpwcc1

this is needed to fix bug with stadimeter button in scope views: http://www.mediafire.com/?v8cjgjh2s14337j
Unzip and place in the test version's \data\Scripts\Menu folder letting it overwrite the old one

changes/additions in this test version:
- added a new user option that controls the starting and minimum width of the messagebox. Minimum width is 180.0. Default is 315.0 (stock size). (MessageBoxMinimumWidth)
- revised Automation so that it dynamically 'loads' the commands for the script when script is played. When script is stopped the commands are 'unloaded' to free memory. This dramatically reduces the memory used with all the scripts loaded in.
- when Disable sextant is clicked in the sextant window it will also disable the sextant window now
- fixed bug of being able to close sextant window while sextant was active (if this happened then there was no way to deactivate sextant!)
- fixed bug of button for using sextant disappearing after using the sextant

I finally rewrote automation so that it's way more memory friendly :D
Fixed many bugs with the sextant window staying visible and/or the button for use sextant staying visible

Greetings from a small island in the south pacific :cool:

Pexorn

01-19-14 04:59 AM

Hello guys!

I just donated to this forum as I bought this game yesterday.

I'm trying to make some experience about modding, so I tried this mod.
Sorry I didn't try to search on this thread more precisely as it has more than 500 page... :oops:

My problem is;
I set NewUIs to SH5Enhanced mode and turned off bars autohide option. Now, as you know while you hold ctrl key, essential bars switch to advanced mode, so you can set precise speed and depth. But with this mod installed, for me depth meter isn't showing at left of the screen only I see the ">" arrow icon, but no "meters texture" or how could I call...

Anybody could give me a hint, how can I resolve this?
Also I'm using some mod which overwrite each others config as I noted by mod enabler, so I don't know which mod loading order could be better.

I downloaded Sober's all in one megamods collection, but I don't want to enable all the mods due I even don't know what they do. :) So I tried pick one or two I guessed their purpose. I just wrote this because maybe my problem is related to mod's loading order. But back to my "original" problem...

in advanced bar-mode, depth meter isn't shown correctly

Is anybody could help me?

Oby	01-19-14 06:06 AM

Uninstall NewUIs_TDC_7_x_x_AltAdvSpeedGraphics_by_naights addon for base mod. It's the one that cause your problem. :salute:

vdr1981

01-22-14 11:42 AM

Can someone confirm that this mod (AI Subs hydrophone fix (SH5)) isn't needed anymore?

Mikemike47

01-22-14 08:00 PM

Welcome back TDW & help

1 Attachment(s)

@TDW
The Options file viewer/editor has a problem with changing hotkeys. I have experimented with versions 1.028 to 1.032 (stated at bottom of post #1). Other subsimmers and I have the believe that hotkeys can be edited. We could not edit any hotkeys to our liking.

Picture called hotkey enabling, I can not change the enabled hot key function for crash dive from false to true. Other commands I can not change from true to false; I do not remember those examples.

The hotkeys report works (using Multiple UIs for TDC version 7.5, test version 12) fine.

Another reminder link
Thanks.

TheDarkWraith

01-22-14 08:05 PM

Quote:

Originally Posted by Mikemike47 (Post 2166700)

Ah yes, I need to make 7.5.0 official. Hmm, I'll try and look into it this weekend. I leave for Mexico sometime next week (waiting on the phone call to tell me when) then off to Brazil. I'll probably have to get my passport updated with more pages again the way this year is shaping up :D

What all problems have people been having with 7.5.0? Let's compile a list so I have something to work on along with the GR2 Editor/Viewer on the planes.

Mikemike47

01-22-14 08:10 PM

Quote:

Originally Posted by TheDarkWraith (Post 2166702)

I leave for Mexico sometime next week (waiting on the phone call to tell me when) then off to Brazil. I'll probably have to get my passport updated with more pages again the way this year is shaping up

Oh good, you're looking across all threads. :yeah:OH-no, oh-no, lots of us subsimmers, could not wait for you to come back someday. Now you must leave so soon. Life and work go on!!

TheDarkWraith

01-22-14 08:21 PM

Quote:

Originally Posted by Mikemike47 (Post 2166704)

Oh good, you're looking across all threads. :yeah:OH-no, oh-no, lots of us subsimmers, could not wait for you to come back someday. Now you must leave so soon. Life and work go on!!

I love to travel abroad and that was one of the requirements in my line of work. I take my scuba gear with me everywhere I go. I've dove some really neat places and probably places no one will ever visit. It is great to be single :D The one thing I do have a problem with is renting airplanes overseas. I'm a pilot but man is it hard to rent airplanes overseas! I have yet to rent one abroad. There are some places I've been that would've been breathtaking to see from the air. Yeah I could do the tourist thing and take a helo or airplane tourist flight but it's not the same if you're not the pilot.

All times are GMT -5. The time now is 02:12 AM.

Page 551 of 588

551

Show 20 post(s) from this thread on one page