SUBSIM Radio Room Forums
Page 53 of 66 « First 34349505152 53 5455565763 Last »
Show 20 post(s) from this thread on one page

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)
-   SHIII Mods Workshop (https://www.subsim.com/radioroom/forumdisplay.php?f=195)
-   -   [REL] OLC GUI v1.2.7 (https://www.subsim.com/radioroom/showthread.php?t=124639)

onelifecrisis 02-23-08 03:42 PM
Quote:
Originally Posted by Fr8monkey
I dont know what to say. I remove OLC 1.2.3 and 1.2.2 with the JSMGE mad I get the map contacts. Same realism settings and Mods. I'm lost.
You had installed both 1.2.2 and 1.2.3 at the same time? Why? Nevermind that doesn't matter.

OLC GUI does not remove map contacts. See here (screenshot taken in 1.2.3):

http://farm4.static.flickr.com/3014/...3f03c556_o.jpg

If you insist on believing that your problem is the GUI's fault the I suggest you uninstall it. Otherwise, follow the usual steps... uninstall all other mods and see if that fixes it... if not, uninstall and re-install SH3 and see if that fixes it... if not then good luck finding the problem.

OLC

Fr8monkey 02-23-08 04:42 PM
I wasn't saying that it is GUI's fault, I was just wondering what I did. I will try again.

onelifecrisis 02-23-08 04:54 PM
Quote:
Originally Posted by Fr8monkey
I wasn't saying that it is GUI's fault, I was just wondering what I did. I will try again.
I have no idea, sorry.

Fr8monkey 02-23-08 07:22 PM
Got it! I tookout the integrated orders mod (had no idea how it got there) and that fixed it. Sorry for all the trouble.

onelifecrisis 02-23-08 09:52 PM
Quote:
Originally Posted by Fr8monkey
Got it! I tookout the integrated orders mod (had no idea how it got there) and that fixed it. Sorry for all the trouble.
That fixed it? :o Bizarre! Oh well, glad you're sorted.

The Butcher 02-23-08 10:50 PM
On my second patrol with the 1.2.3, it was the first patrol of a new career, I had the TDC lock up on me. I had one successful targeting set up, everything worked fine then the next ship I went to set the speed and there was no budging the needle, same with the AOB and distance, the Attack Disk didn't move either. Thankfully it was only a Tramp so I didn't miss much. Next target I used the Weapon Officer station and was able to make changes there. When I opened the TDC again it reflected the settings. The Periscope didn't update the bearing unless I moved it while the TDC was open. I was able to hit two more ships this way. I didn't get to try it again after I finished that patrol and roll back SH3 Cmdr but I have had this happen before with other versions but it was after I restarted a saved game and assume it was because of that. I had Double Mast Values, 1.2.3 Core, and 1.2.3 Dark installed. Also GWX No Medals, GWX Ehanced Damage, Torpedo Damage 2.0, Lutzow Music Mod, and Alternate Torp Door Sound. Have you heard this before or is it my set up?

onelifecrisis 02-24-08 12:21 AM
Quote:
Originally Posted by The Butcher
On my second patrol with the 1.2.3, it was the first patrol of a new career, I had the TDC lock up on me. I had one successful targeting set up, everything worked fine then the next ship I went to set the speed and there was no budging the needle, same with the AOB and distance, the Attack Disk didn't move either. Thankfully it was only a Tramp so I didn't miss much. Next target I used the Weapon Officer station and was able to make changes there. When I opened the TDC again it reflected the settings. The Periscope didn't update the bearing unless I moved it while the TDC was open. I was able to hit two more ships this way. I didn't get to try it again after I finished that patrol and roll back SH3 Cmdr but I have had this happen before with other versions but it was after I restarted a saved game and assume it was because of that. I had Double Mast Values, 1.2.3 Core, and 1.2.3 Dark installed. Also GWX No Medals, GWX Ehanced Damage, Torpedo Damage 2.0, Lutzow Music Mod, and Alternate Torp Door Sound. Have you heard this before or is it my set up?
See post #1, troubleshooting section at the end.

Ivan Putski 02-24-08 02:39 AM
OLC, thank you for ver. 1.2.3, really nice, I can actually read all the small numbers, and print. All us older seadogs appreciate any help they can get. Puts:rock:

The Butcher 02-24-08 06:51 AM
Thanks, I have not looked at post one in quite a while :doh:. I'm just getting lazy I guess. I really like the new layout.

Philipp_Thomsen 02-24-08 11:34 AM
Quote:
Originally Posted by Philipp_Thomsen
I would just love reading "Changes in OLC 1.2.3"

So is there a readme file within the mod?
So, is there anywhere that I can read the changes from 1.2.2 to 1.2.3?

Grayson02sept1980 02-24-08 11:43 AM
Quote:
Originally Posted by onelifecrisis
Known Problems and Workarounds

TDC Switch/Panel gets out of sync...
...resulting in inoperable firing solution dials. I've never had this problem and can't replicate it, but if it ever happens to you there is a workaround: right click on your weapons officer and then left click on the TDC auto/manual button (the one in the 3D world) once, and that should fix it.
Just wanted to add that I have experienced this in 1.2.2 ... just for the record.

And I also would like to know what changes are made from 1.2.2 to 1.2.3.

And Thanks again for that great mod. :up:

skookum 02-24-08 09:48 PM
Just a shameless bump RE: the SB camera mod PM.

Thanks.

Hylarion 02-25-08 01:16 PM
Hello to all,

First of all, as a real newbie in this game, I must admit it rocks!!!! Big time!!!
Plus the community is amazingly nice compared to all the gaming forums I've posted to so far (and that's great).
OK, here's the point of my reply:
Since i have only played for two weeks, and i am just out of naval academy to my first assigment (1st flotilla, IIA sub), I decided to jump in the big sea without inflatable vest (meaning GW2.0, 16 km atmosphere, enhanced damages, WeatherFix, OLC GUI 1.2.3 with 86% realism, so manual TDC and so on, I just couldn't get rid of the small event camera and map updates yet).
I've (almost) figured out how to target and actually hit ships manually, but I think i may have found a non-compatibility between OLC GUI 1.2.3 and GWX-FrenchFix mod (did I mention I am French?). Indeed, I need to manually switch the manual/auto TDC mode on and off in the WO 3D view each time I want to set-up a torpedo solution if I use the french keyboard configuration in main menu, although it toggles perfectly fine if I use the english keyboard config. I am not asking for a fix right now (I am still too young at the game to be bothered by keyboard config), but that may be something to look into for future releases??
I hope it helps, and that it isn't a repeat of something already posted earlier in the 55+ pages of this post...
Good hunting to all.

Sailor Steve 02-25-08 03:41 PM
Well...

WELCOME ABOARD, Hylarion!:sunny:

onelifecrisis 02-25-08 05:20 PM
Quote:
Originally Posted by Hylarion
Hello to all,

First of all, as a real newbie in this game, I must admit it rocks!!!! Big time!!!
Plus the community is amazingly nice compared to all the gaming forums I've posted to so far (and that's great).
OK, here's the point of my reply:
Since i have only played for two weeks, and i am just out of naval academy to my first assigment (1st flotilla, IIA sub), I decided to jump in the big sea without inflatable vest (meaning GW2.0, 16 km atmosphere, enhanced damages, WeatherFix, OLC GUI 1.2.3 with 86% realism, so manual TDC and so on, I just couldn't get rid of the small event camera and map updates yet).
I've (almost) figured out how to target and actually hit ships manually, but I think i may have found a non-compatibility between OLC GUI 1.2.3 and GWX-FrenchFix mod (did I mention I am French?). Indeed, I need to manually switch the manual/auto TDC mode on and off in the WO 3D view each time I want to set-up a torpedo solution if I use the french keyboard configuration in main menu, although it toggles perfectly fine if I use the english keyboard config. I am not asking for a fix right now (I am still too young at the game to be bothered by keyboard config), but that may be something to look into for future releases??
I hope it helps, and that it isn't a repeat of something already posted earlier in the 55+ pages of this post...
Good hunting to all.
You've found a way to consistently replicate that bug!? Fantasic!! You're the first to do so! :rock:

And yes, welcome aboard. :D And what an entrance! :ping:

The GUI doesn't support French but it could... I'm wondering now whether all the people that have had this problem use the French language setting? :hmm: If anyone uses German and/or English language settings and has had this bug, please say so.

Hylarion, I'll make a French-compatible version and release it asap. May I PM you for translations if I need to?

Storabrun 02-25-08 07:25 PM
Quote:
Originally Posted by onelifecrisis
You've found a way to consistently replicate that bug!? Fantasic!! You're the first to do so! :rock:
But is this really the "out of sync" bug? Sounds more like the TDC don't toggle at all for him, which makes sense when he is using his own/stock commands.cfg file. I used to do that too when I first installed this mod because I have a swedish keyboard. I mostly use key commands so the loss of some functionality in the "integrated orders" part of your mod didn't make it unplayable for me. I have it sorted now though (diffmerge) so I'm not asking for a swedish fix:)

onelifecrisis 02-25-08 08:00 PM
Quote:
Originally Posted by Storabrun
Quote:
Originally Posted by onelifecrisis
You've found a way to consistently replicate that bug!? Fantasic!! You're the first to do so! :rock:
But is this really the "out of sync" bug? Sounds more like the TDC don't toggle at all for him, which makes sense when he is using his own/stock commands.cfg file. I used to do that too when I first installed this mod because I have a swedish keyboard. I mostly use key commands so the loss of some functionality in the "integrated orders" part of your mod didn't make it unplayable for me. I have it sorted now though (diffmerge) so I'm not asking for a swedish fix:)
You're right, I was reading too fast again. :oops:

Hylarion 02-26-08 09:49 AM
Quote:
Originally Posted by onelifecrisis
Hylarion, I'll make a French-compatible version and release it asap. May I PM you for translations if I need to?
Sure. Don't hesitate to ask me if you need English to French translation. :know:

KeldorKatarn 02-26-08 12:46 PM
Quote:
Originally Posted by onelifecrisis
Quote:
Originally Posted by The Butcher
On my second patrol with the 1.2.3, it was the first patrol of a new career, I had the TDC lock up on me. I had one successful targeting set up, everything worked fine then the next ship I went to set the speed and there was no budging the needle, same with the AOB and distance, the Attack Disk didn't move either. Thankfully it was only a Tramp so I didn't miss much. Next target I used the Weapon Officer station and was able to make changes there. When I opened the TDC again it reflected the settings. The Periscope didn't update the bearing unless I moved it while the TDC was open. I was able to hit two more ships this way. I didn't get to try it again after I finished that patrol and roll back SH3 Cmdr but I have had this happen before with other versions but it was after I restarted a saved game and assume it was because of that. I had Double Mast Values, 1.2.3 Core, and 1.2.3 Dark installed. Also GWX No Medals, GWX Ehanced Damage, Torpedo Damage 2.0, Lutzow Music Mod, and Alternate Torp Door Sound. Have you heard this before or is it my set up?
See post #1, troubleshooting section at the end.
I just had this too, cost me my best performance in one training mission so far :(
Is it possible that I hit a shortcut that activated auto.updating while having the TDC panel off? It really behaves like someone activated that without showing the panel which effetively turns the function of the button in your GUI around.. TDC is on auto when visible and manual when invilible. I certanly didn't click on the button in 3D or I'd have known how to fix it prior to reading this, so is it possible I hit a shortcut I don't know about? Or is there any other way to toggle this that I might accidently have used?
Anyway even if this is a bug that is simply not trackable, I'm glad it is so easy to fix.

Phoenix3000 02-26-08 03:05 PM
Hi OLC,

Yet again real-life has been getting in the way, and only today have I finally installed GWX2.0 and your OLC GUI 1.2.3 - looking better each time I might add :up:

Do you recall some weeks back you explained what I need to change for the English to German names? Well, its done. I had some time on my hands today so after installing SH3 I made that the first thing, and I've tested it quite a bit today to ensure it all looks (and works) OK. I'm releasing it very soon, just need to package it etc.

Anyway, very quick question for you - as its been so long since I played SH3 I recall having the equivalent of the Integrated Orders mod when using your GUI - do I need to install the I/O that came with GWX followed by your mod?

Thanks for everything mate! :D

Px3000


All times are GMT -5. The time now is 12:09 PM.
Page 53 of 66 « First 34349505152 53 5455565763 Last »
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.