SUBSIM Radio Room Forums
Page 30 of 54 « First 2026272829 30 3132333440 Last »
Show 20 post(s) from this thread on one page

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)
-   SHIII Mods Workshop (https://www.subsim.com/radioroom/forumdisplay.php?f=195)
-   -   The MaGui mod - Final version (https://www.subsim.com/radioroom/showthread.php?t=166320)

bojan811 05-05-11 04:58 PM
Just stated my career with my new VIIB but when the patrol started to load just before 95% to finsh my game crashed.
So i just did this...i disbaled this mod but i left the DD_OpenHatch_V3_RH
V3.09 beta and on top of him maknas gui final and fix for Fm_Ni and now the game loaded without new interior of course just free cam but now i have a isue with the hydrophone, when i try to increase the vol on ambient sound i can`t because button says "sonar man".

btw thaks for the info about charts, looking good..now just a little practice.

and another thing when i press PAGE UP button to rise the att per i get a "no officer at helms station" message!? I dont even know what that means.

makman94 05-05-11 05:07 PM
Quote:
Originally Posted by bojan811 (Post 1657697)
Just stated my career with my new VIIB but when the patrol started to load just before 95% to finsh my game crashed.
So i just did this...i disbaled this mod but i left the DD_OpenHatch_V3_RH
V3.09 beta and on top of him maknas gui final and fix for Fm_Ni and now the game loaded without new interior of course just free cam but now i have a isue with the hydrophone, when i try to increase the vol on ambient sound i can`t because button says "sonar man".

btw thaks for the info about charts, looking good..now just a little practice.

and another thing when i press PAGE UP button to rise the att per i get a "no officer at helms station" message!? I dont even know what that means.
show me your mod list

bojan811 05-05-11 05:36 PM
http://img819.imageshack.us/img819/6154/modsl.jpg

Uploaded with ImageShack.us

makman94 05-05-11 07:46 PM
Quote:
Originally Posted by bojan811 (Post 1657697)
.... but now i have a isue with the hydrophone, when i try to increase the vol on ambient sound i can`t because button says "sonar man".
ok Bojan...i enabled exactly these mods and volume button is there ...just search a little bit the area with your cursor and you will see it write ''ambient volume''...clic and adjust volume (ok...if someone can really call this ''adjust'':DL)
Quote:
Originally Posted by bojan811
and another thing when i press PAGE UP button to rise the att per i get a "no officer at helms station" message!? I dont even know what that means.
this is happening becuase the same fix is for those who are using anvart's mods . when you have enabled anvart's mods ,this order (page up) does something when you are in port(don't know exactly what) .you get this message becuase you don't have (i am only guessing here becuase i am not using anvart's mods) the WO on bridge(or some other officer...all officers must be at their places) . i included this order after a request by one member who was using anvart's mod but i don't really know what his mod does exactly with this order .

in your case : don't bother with it ...if you have the WO on bridge you will not get this message (but WO will not execute the order as you haven't install anvart's mods). if you don't have the WO on bridge ...you will get the message but nothing terrible will happen...just ignore the message

edit: disable the ''improved malloy's ruler'' . it is allready included in MaGui F

bojan811 05-05-11 08:43 PM
Quote:
Originally Posted by makman94 (Post 1657850)
ok Bojan...i enabled exactly these mods and volume button is there ...just search a little bit the area with your cursor and you will see it write ''ambient volume''...clic and adjust volume (ok...if someone can really call this ''adjust'':DL)


this is happening becuase the same fix is for those who are using anvart's mods . when you have enabled anvart's mods ,this order (page up) does something when you are in port(don't know exactly what) .you get this message becuase you don't have (i am only guessing here becuase i am not using anvart's mods) the WO on bridge(or some other officer...all officers must be at their places) . i included this order after a request by one member who was using anvart's mod but i don't really know what his mod does exactly with this order .

in your case : don't bother with it ...if you have the WO on bridge you will not get this message (but WO will not execute the order as you haven't install anvart's mods). if you don't have the WO on bridge ...you will get the message but nothing terrible will happen...just ignore the message

edit: disable the ''improved malloy's ruler'' . it is allready included in MaGui F
haha right as usual :rock:
it only took a little search.
am not using anvart mod because i start my patrols on sea so pens are not my thing.
Thanks again you`re the man!:salute:

makman94 05-05-11 09:18 PM
Quote:
Originally Posted by bojan811 (Post 1657867)
...... i start my patrols on sea so pens are not my thing.
.....
really ? that is strange Bojan....

please do this : with the above mod list enabled enter the torpedo training mission and press the page up to raise the attack scope.

do you get the message ?

edit : nevermind...i got the message ! you have just first to put the WO on bridge and then to remove him in order ot start getting the message. it is this that i allready told you at the previous post
TO GET RID OF THE MESSAGE :
1. DISABLE THE FM_NI FIX FOR MAGUI F
2. OPEN THE COMMAND_EN.CFG (with notepad)
3. FIND COMMANDS [Cmd418] and [Cmd429] and REPLACE THEM WITH THESE:

[Cmd418]
Name=DGuns_Update_target
Ctxt=1

[Cmd429]
Name=AAGuns_Update_target
Ctxt=1

4. SAVE THE COMMANDS_EN
5. RE-ENABLE THE FM_NI FIX FOR MAGUI F
6. FINISH

bojan811 05-06-11 05:25 PM
@makman

I did what you said and as you say.
The thing is my lines

[Cmd418]
Name=DGuns_Update_target
Ctxt=1

[Cmd429]
Name=AAGuns_Update_target
Ctxt=1

was already like this so i did not edit them at all!?

I will go now to new patrol in my career and will report back.
If all is right i should not receive "no officer" massage anymore?

makman94 05-06-11 06:10 PM
Quote:
Originally Posted by bojan811 (Post 1658502)
@makman

I did what you said and as you say.
The thing is my lines

[Cmd418]
Name=DGuns_Update_target
Ctxt=1

[Cmd429]
Name=AAGuns_Update_target
Ctxt=1

was already like this so i did not edit them at all!?

I will go now to new patrol in my career and will report back.
If all is right i should not receive "no officer" massage anymore?
no...it can't be like this without editing them first !!

at [Cmd418] and [Cmd429] you will see :

[Cmd418]
Name=DGuns_Update_target
Ctxt=1
Key0=0x22,Cc,"Ctl+PgDn"
Key1=0x22,C,"PgDn"
Key2=0x21,C,"PgUp"


[Cmd429]
Name=AAGuns_Update_target
Ctxt=1
Key0=0x21,Cc,"Ctl+PgUp"

you have to delete the red lines (this is the order that is giving you the spoken message) and make them look exactly like this :

[Cmd418]
Name=DGuns_Update_target
Ctxt=1


[Cmd429]
Name=AAGuns_Update_target
Ctxt=1

ps: pay attention that these edits must took place in the commands_en that is inside the ''FM_NI FIX for MaGui F''

bye

bojan811 05-06-11 07:30 PM
@ps: pay attention that these edits must took place in the commands_en that is inside the ''FM_NI FIX for MaGui F''

OK now when you say it like that.
without the ''FM_NI FIX for MaGui F' i didn`t have this lines in red but when i enabled this now i do.
So i have to edit your ''FM_NI FIX for MaGui F' and enable it or i can enable it and than change the lines?
btw...i don`t know what happened with my TDC but now when he is in manual my light is green and when locked it`s red.
I had to miss a ship 2x before i noticed this feature... :O:

disregard this about the lights on ctd...i switched it from free cam while walking around the sub...but the att per did not recognized this and when i switch my att per off i actually turn it on...and vise versa. so no worries there.

makman94 05-08-11 12:05 AM
Quote:
Originally Posted by bojan811 (Post 1658575)
....
So i have to edit your ''FM_NI FIX for MaGui F' and enable it or i can enable it and than change the lines?
.....
hi Bojan,

follow EXACTLY the steps that are written at post 441

(at step 2 ....i mean the command_en that is inside the ''FM_NI FIX for MaGui F'')

bojan811 05-08-11 02:53 PM
Done!
It working now just fine.
Gracie

Pomorza 05-09-11 01:16 PM
Hey guys
I just started playing (again) SHIII ealier this week. I downloaded this mod but have issues and I wonder if anyone can help. I'm running the latest GWX. I cannot get into the flak gun at all and the little circle thingy on the scope (speed finder) doesn't seem to want to pull down. Any ideas?

Jan

bojan811 05-12-11 08:14 PM
:hmmm:
Where is makman when you need him.
:)
Try to enable/disable mod via jsgme i had some isues with some another mod, or try to download it again.
It should work just fine.
Or maby you have some conflict with this mod and some other mod!?

B811

makman94 05-13-11 12:51 AM
Quote:
Originally Posted by Pomorza (Post 1660448)
Hey guys
I just started playing (again) SHIII ealier this week. I downloaded this mod but have issues and I wonder if anyone can help. I'm running the latest GWX. I cannot get into the flak gun at all and the little circle thingy on the scope (speed finder) doesn't seem to want to pull down. Any ideas?

Jan
note 5 at first post

makman94 05-17-11 05:51 PM
for Buck O (removing the 'water effect' from the free camera) :

http://img12.imageshack.us/img12/3015/freecameffect.png


All times are GMT -5. The time now is 04:37 AM.
Page 30 of 54 « First 2026272829 30 3132333440 Last »
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.