SUBSIM Radio Room Forums
Page 270 of 402 « First 170220260266267268269 270 271272273274280320370 Last »
Show 20 post(s) from this thread on one page

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)
-   SH5 Mods Workshop (https://www.subsim.com/radioroom/forumdisplay.php?f=249)
-   -   [REL] Open Horizons II (https://www.subsim.com/radioroom/showthread.php?t=189818)

Madox58 10-31-13 03:47 PM
One thing about all the wires.

Only one went all the way to the ground to my knowledge. The others were used to capture the Balloon on bringing it down much like K-Ships.

The Balloons I jumped from in England were WWII issues and had the side ropes. Only the main line went all the way down.

Don't know if the SAS still uses those as a jump training platform.
:hmmm:

gap 10-31-13 03:50 PM
Quote:
Originally Posted by Targor Avelany (Post 2135929)
mwahahaahahaha!!!!!!! :up::yeah::rock:


Edit:


I might have to slightly re-do the files in that case. Or any of you can do it yourselves if you have the GR2 files: as it stands right now, the files take the texture from the same folder as they are themselves. To change that you need to put the textures in to the texture folders and then open the files in the GR2 editor and select it from the texture folder (just change the path). After that the file will look into the texture folder for the textures.
Already did it Targor: have a look into the files I have just posted. In any case if the textures are assigned through cfg file, the path stored in the GR2 file doesn't matter. I think the missing textures in Trevally's screenies are from... he missing the texture files :03:

P.S: well done mate :up:

gap 10-31-13 03:53 PM
Quote:
Originally Posted by Trevally. (Post 2135937)
Just testing your new ones now - I am getting no unit info in ME2:hmmm:
Check that I didn't mistype anything :hmm2:

Targor Avelany 10-31-13 03:55 PM
Quote:
Originally Posted by gap (Post 2135940)
Already did it Targor: have a look into the files I have just posted. In any case if the textures are assigned through cfg file, the path stored in the GR2 file doesn't matter. I think the missing textures in Trevally's screenies are from... he missing the texture files :03:

P.S: well done mate :up:
Awesome :)
Nicely done.

Also, please don't delete the link yet or the files. I'm not at home atm and cannot download it, but I'm really interested to see them: we will be working on more stuff down the line and I would prefer to understand all the little details and so I can finish up the file without wasting your time.

Trevally. 10-31-13 03:56 PM
Quote:
Originally Posted by gap (Post 2135943)
Check that I didn't mistype anything :hmm2:
Yes something is up:hmmm:
I have no control over unit height speed direction etc in ME2

In game - they are there where I put them - all facing north (default)
no textures

Spell check.....:D

Trevally. 10-31-13 03:58 PM
Found it "BBalloon" in .cfg:up:

testing.......

gap 10-31-13 04:03 PM
Quote:
Originally Posted by privateer (Post 2135938)
One thing about all the wires.

Only one went all the way to the ground to my knowledge. The others were used to capture the Balloon on bringing it down much like K-Ships.

The Balloons I jumped from in England were WWII issues and had the side ropes. Only the main line went all the way down.

Don't know if the SAS still uses those as a jump training platform.
:hmmm:
You might be correct. My main source of information when I modelled the ballon was this nicely done webpage:

http://www.bbrclub.org/The%20MK%20VI...make%20up..htm

It says:

Quote:
At the join of gores B and C were 5 rigging patches used to attach picketing lines, that were in turn attached to handling guys, to enable the balloon to be handled on the ground. When bedded down the picketing lines were either securely fastened to large concrete blocks in a diamond shape of the picketing lines would be attached to screw pickets, that were like huge corkscrews twisted into the ground.
Nowhere it states that picketing lines were secured to the soil while the balloon was flown. Correcting this mistake will be quite easy. How long should they be (more or less)? :hmm2:

Trevally. 10-31-13 04:05 PM
Quote:
Originally Posted by Trevally. (Post 2135948)
Found it "BBalloon" in .cfg:up:

testing.......
nope - the b must have been for barrage:D

Madox58 10-31-13 04:07 PM
From what I saw they were only long enuff to allow the ground crew to grab and control the Balloon on bring it down.

Now if you shorten what you have? You could see about placeing the obj-pendulum controller on them to give it some life.
:up:

Not sure if that works with GR2 files but it is a thought.

gap 10-31-13 04:10 PM
Quote:
Originally Posted by Trevally. (Post 2135948)
Found it "BBalloon" in .cfg:up:

testing.......
:up:

Let us know, and make sure to post some screenies when you get their textures to show correctly (they should if I didn't make another of my n00b errors :doh:)

Madox58 10-31-13 04:13 PM
Quote:
Originally Posted by gap (Post 2135958)
:up:

Let us know, and make sure to post some screenies when you get their textures to show correctly (they should if I didn't make another of my n00b errors :doh:)
Danged slackers!! :stare:
:haha:

Trevally. 10-31-13 04:13 PM
Quote:
Originally Posted by gap (Post 2135958)
:up:

Let us know, and make sure to post some screenies when you get their textures to show correctly (they should if I didn't make another of my n00b errors :doh:)
Nope - no joy
I can't see the error and have no control in ME2
Models are being drawn but no textures

gap 10-31-13 04:17 PM
Quote:
Originally Posted by Trevally. (Post 2135953)
nope - the b must have been for barrage:D
Wait, I think I know what is going on: the GR2 file name and the model name must be identical. Rename the GR2 file and all the accessory files to Barrage_Balloon, and change the path in the cfg file accordingly :hmm2:

Brycey634 10-31-13 04:33 PM
Thank you!
 
Quote:
Originally Posted by Trevally. (Post 2135679)
Your welcome:up:



Yes - its a sick ship:doh::O:
Alright, thanks again!
Also, great mod, loving it so far :salute:

gap 10-31-13 04:34 PM
Quote:
Originally Posted by Targor Avelany (Post 2135945)
Awesome :)
Nicely done.

Also, please don't delete the link yet or the files. I'm not at home atm and cannot download it, but I'm really interested to see them: we will be working on more stuff down the line and I would prefer to understand all the little details and so I can finish up the file without wasting your time.
I think you are talking about the dat unit, don't you? In any case no problem, the link is there to stay :up:

Quote:
Originally Posted by privateer (Post 2135956)
From what I saw they were only long enuff to allow the ground crew to grab and control the Balloon on bring it down.
so, let's say 100 feet?

Quote:
Originally Posted by privateer (Post 2135956)
Now if you shorten what you have? You could see about placeing the obj-pendulum controller on them to give it some life.
:up:

Not sure if that works with GR2 files but it is a thought.
Will do it with the dat version of the balloon which will be fitted aboard ships. The GR2 version is only for land usage, and won't have any swinging. :up:

P.S: can you explain with some more detail what happened when you tried using the obj_pendulum controller on your balloons? I still hope using it on the root bone of ship-borne balloons :88)


All times are GMT -5. The time now is 06:46 AM.
Page 270 of 402 « First 170220260266267268269 270 271272273274280320370 Last »
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.