SUBSIM Radio Room Forums

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)
-   SHIII Mods Workshop (https://www.subsim.com/radioroom/forumdisplay.php?f=195)
-   -   [REL] OLC 'Gold' MkIId (https://www.subsim.com/radioroom/showthread.php?t=147667)

onelifecrisis 06-12-09 05:51 PM

Quote:

Originally Posted by tomfon (Post 1116627)
Hi OLC.
How are you doing?
I see that you're into a serious debate at "General Topics". Take it easy, mate.;)
BTW, where did you get the "Internal Uboat Sound" mod. I can't find it.
Thanks in advance.

Heh, yeah, no ****. If you think what's in that thread is bad you should see my PMs. What really did my head it was Aramike's non-response to my initial PM to him. I spent quite a while replying to every bloody point he made including the one in particular which I felt was actually relevant, and I felt sure I had him pretty well cornered on it (he'd been evading it and trying to bury it in a sea of tangent arguments) and then I got his reply saying he won't discuss it further! And he had a few choice words for me too, which I won't repeat. I sent him a few more PM's but all I got back was abuse - really strong abuse actually, but he's ex-army or something so I guess it's to be expected. Well, so much for my attempt to calm him down by taking things to PM - that didn't work at all! :nope:

Anyway, yeah... sorry, load off chest... the Internal U-Boat Sound... go to BTS mods and look in Venator's mods. :up:

tomfon 06-12-09 06:17 PM

Quote:

Originally Posted by onelifecrisis (Post 1116631)
I spent quite a while replying to every bloody point he made including the one in particular which I felt was actually relevant

Unfortunately it doesn't always work this way though i don't agree too when people go like "i won't discuss this matter further". Then i'll say sthg like, "You arrogant @#!?*^$" and inevitably hell breaks out. Anyway...

Quote:

Originally Posted by onelifecrisis (Post 1116631)
go to BTS mods and look in Venator's mods. :up:

Got it!

:arrgh!:

Brer Rabbit 06-13-09 12:07 AM

OLC and Tomfon
 
I want to take the opportunity to thank-you both for your mods, explanations and help given to the community.

I am on my second GWX career and third patrol using OLC's mod. I have upgraded to the newer versions after each patrol. At first I was disappointed, I missed my god's eye view, I missed the event camera, I missed all of the ways that I had used track, target and sink ships. I felt lost without the tools and assists I got from elements of the more simplified means to sink ships. I found that by to my surprise, I have been reasonalbly successful in my attacks--and to the point I am more in line with RL patrol results. I am improving with each patrol. Thanks for again for your dedication to improving the realism of this great subsim.

Tomfon I appreciate the draggable stopwatch, I have missed having it, and your mod is greatly appreciated.

Keep up the great work! :salute:

tomfon 06-13-09 02:52 AM

Thank you for your kind words Brer Rabbit.:yep:
However, the "draggable stopwatch" is a mod i "made" by simply following Mikhayl's instructions i found on subsim plus its the only mod i've ever "made"...:wah: :shifty:

Just for the sake of history and proper crediting (i hope such a word exists in English) there are, literally, countless people who contribute and contributed to the community with real mods! (OLC, Rubini, Thomsen, Mikhayl... and newer modders like h.sie, makman... the list is endless let alone the GWX, WAC and NYGM team.:o)

Anyway, thanks again. :up: :oops::oops:

onelifecrisis 06-13-09 11:26 AM

Thanks Brer.

Quote:

Originally Posted by Brer Rabbit (Post 1116715)
I missed my god's eye view, I missed the event camera

Just to check... what do you mean by "god's eye view"?

JT1981 06-13-09 11:40 AM

Oh,i have a problem. when using the OLC Gold MKiic,my periscope have only one magnification,the mousewheel dosnt work at all....

when i disable the OLC Gold MKiic(i used the fourth main mod),everything is ok!

why?

onelifecrisis 06-13-09 11:49 AM

Quote:

Originally Posted by JT1981 (Post 1116911)
Oh,i have a problem. when using the OLC Gold MKiic,my periscope have only one magnification,the mousewheel dosnt work at all....

when i disable the OLC Gold MKiic(i used the fourth main mod),everything is ok!

why?

The scopes each have a (different) fixed zoom level in this mod. I made it like like that because that's the only way (that I know of) to fix the zoom/wave rendering problem in SH3 (in any other GUI you will see that waves are stretched and flattened more and more by increased zoom levels, but that problem does not happen in OLCG2).

JT1981 06-13-09 12:01 PM

so you mean i could not switch the magnification between 1.5 and 10 in attack periscope like in GWX3?

another question: now,the magnification of attack/observe periscope is 1.5/10?

onelifecrisis 06-13-09 12:03 PM

Quote:

Originally Posted by JT1981 (Post 1116918)
so you mean i could not switch the magnification between 1.5 and 10 in attack periscope like in GWX3?

Yes, that's what I mean.

Quote:

Originally Posted by JT1981 (Post 1116918)
another question: now,the magnification of attack/observe periscope is 1.5/10?

The attack scope in OLCG2 is set at 3X zoom.
The observation scope in OLCG2 is set at 6X zoom.

Brer Rabbit 06-13-09 06:48 PM

God's eye view
 
OLC
Just to clarify my earlier post, the God's eye view was the map updating that accurately places ship symbols on the map as you zoom in.

In the same tract sonor lines of contact seemed quite accurate as to range by measuring the distance along the line to its end, and allowed you to get a reasonably accurate course by marking the ends of the lines. Currently the lines seem to show more realistically the sound propagation in the water, so that at this time I can only ascertain the bearing to the contact, at least until I get closer.

onelifecrisis 06-13-09 06:55 PM

Quote:

Originally Posted by Brer Rabbit (Post 1117094)
OLC
Just to clarify my earlier post, the God's eye view was the map updating that accurately places ship symbols on the map as you zoom in.

In the same tract sonor lines of contact seemed quite accurate as to range by measuring the distance along the line to its end, and allowed you to get a reasonably accurate course by marking the ends of the lines. Currently the lines seem to show more realistically the sound propagation in the water, so that at this time I can only ascertain the bearing to the contact, at least until I get closer.

Oh I see. I thought for a moment you had turned off map updates entirely! No worries, then.

Sea Hawk 06-13-09 08:49 PM

Just had my 3rd kill of my current patrol - passenger/cargo east of Scappa flow. 1st patrole since loading OLC gold, 2nd kill only a coal tender thingy (does it still count), mind didn't use up any fishes on it.

I love the range and AOB finding mechanisms in OLC Gold. I never did like the steadyometer in the stock game. BIG THANKS to OLC.
:yeah::up::yeah::up: Attack disk is excelent as well. :up::yeah::up::yeah:

Draggable stopwatch working great. Tomfon - you must have flown it to me by condor and dropped it down my hatch, your special delivery is much appreciated.:yeah:

Also trying a little bit of MoBo, still mainly using the navigation chart in SH3.

onelifecrisis 06-13-09 08:52 PM

Quote:

Originally Posted by Sea Hawk (Post 1117136)
I love the range and AOB finding mechanisms in OLC Gold. I never did like the steadyometer in the stock game. BIG THANKS to OLC.
:yeah::up::yeah::up: Attack disk is excelent as well. :up::yeah::up::yeah:

Just to give credit where it is due, Hitman and joegrundman made those tools. :yep: All I did was to find a "better" way to integrate them into the SH3 GUI, and make a tutorial video. :up:

JT1981 06-14-09 03:42 AM

Quote:

Originally Posted by onelifecrisis (Post 1116921)
Yes, that's what I mean.



The attack scope in OLCG2 is set at 3X zoom.
The observation scope in OLCG2 is set at 6X zoom.

if i want to aim the target at different zoom like in olc gui 1.2.7,how could i do?is there any mod or something to install?

onelifecrisis 06-14-09 02:13 PM

Quote:

Originally Posted by JT1981 (Post 1117235)
if i want to aim the target at different zoom like in olc gui 1.2.7,how could i do?is there any mod or something to install?

Well, you could go back to OLC GUI 1.2.7 if you like, but I don't know if it's fully compatible with GWX3.


All times are GMT -5. The time now is 12:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.