New Update 29 December 2018 with :


Draggable and fonctional stopwatch wich can stay in position and start and stop everywhere in any screen.


Thank you Tycho ! :Kaleun_Applaud:




https://i36.servimg.com/u/f36/19/84/56/02/sh3img90.jpg


https://i36.servimg.com/u/f36/19/84/56/02/sh3img91.jpg






Updated link 29 december 2018 to Post 1 :
http://www.subsim.com/radioroom/showthread.php?t=239167



:Kaleun_Cheers: http://www.smiley-emoticones.com/smi..._applaudir.gif

Thanks! Works! Good job!
I have a little problem, the speed switch of torpedo tubes No. 1, No. 4 is not working, the speed is set low.
№№2,3,5 work great!
In the previous version - all switches worked.

http://www.subsim.com/radioroom/imag...Kaleun_Los.gif
Check the torpedo charge. The electric G7e has one speed mode.

Hi, I want to use the RAOBF disk and can't figure out how?
Tell me how to turn on a logarithmic disk in this mod? Or does it need an additional mod?
thanks.

to use periscope raobf disks, you must select "manual shooting" in campaign options. if "automatic shooting" selected, you can't use raobf discs.



for other disks press F2 then left clic of shooting officer and with mouse go up of the screen.

Well, thank you! Век живи, век-учись ... (рус.нар.мудр.)
Please help me understand this disc.
[IMG]https://cdn1.savepice.ru/uploads/201...85553-full.png[/IMG]

i don't know for this specific disk




another usefull way to display the disks :


From any view, left clic on torpedo officer and put your mouse up of the screen (3 disks available)

https://i36.servimg.com/u/f36/19/84/56/02/sh3im106.jpg
...... torp officer




https://i36.servimg.com/u/f36/19/84/56/02/sh3im108.jpg
......torp officer



https://i36.servimg.com/u/f36/19/84/56/02/sh3im105.jpg
......torp officer






From any view, left clic on map officer and put your mouse up of the screen (1 black disk available)


https://i36.servimg.com/u/f36/19/84/56/02/sh3im107.jpg
..map officer

New Update 11 january 2019 with :


Video added in main screen



https://i36.servimg.com/u/f36/19/84/56/02/sh3im109.jpg






Updated link 11 January 2019 to Post 1 :
http://www.subsim.com/radioroom/showthread.php?t=239167




:Kaleun_Cheers:

You record bearings at *equal* time intervals (b1 @ t1, b2 @ t2, b3 @ t3).



You then subtract (b2 - b1) and (b3 - b1) and line up the two results on the disc. Where the two points line up, will identify the target's AOB at b1. Note that you need to be completely stopped for this to work. If you are moving, the result is angle on relative motion rather than AOB.

@GRENADER The tool also exists in Magui mod and it has a readme, here's what it says :



aob tool
--------

the aob tool is attached at weapon officer's orders

how to use this tool
--------------------
1.come to a dead stop.the u-boat must be totally stopped.
2.take the first bearing(B1) of the target and start the chronometer.
3. after x time (any time you want) take the second bearing(B2)
4.after EXACT x time take the third bearing(B3)(note:meaning, if your second bearing was taken after 30 minutes past then you will wait EXACTLY 30 minutes to take the third bearing )
5.calculate B2-B1 (difference between second and first bearing)
6.calculate B3-B1 (difference between third and first bearing)
7.now go to the aob tool.turn the inside disc until you line up the B2-B1 ON OUTSIDE disc WITH B3-B1 ON INSIDE disc
8.read the aob in the small window of the tool
IMPORTANT:the aob that you read is the aob at FIRST bearing.

notes
-----
i.the target must have move at least 5 degrees to take the second bearing.(B2-B1 must be larger than 5 degrees

ii.the tool is very sensitive.that means that if you see the target at 12,3 degrees this is the value that you will use (and don't say 12).the more exactly you are at the bearings...the more acurate will be the aob that you get

iii.with this tool ,you get only the aob(don't forget,..at first bearing),not the true course of target.all that you know by now is that the target is moving at a parallel line.when you calculate the distance ...you will be able to draw the true course of target

Makman94




@ericlea : good job with the draggable watch, :Kaleun_Applaud: , does it work on any version of ARB mod or only on this WAC version that you are improving ?

Hi,


Tycho's functional draggable chrono works fine in all gui !
only need to correctly edit menu_1024_768.ini



I will do it too for the original ARBwidegui : http://www.subsim.com/radioroom/showthread.php?t=232178

Thanks, that would be really nice .

it is done



:Kaleun_Wink:http://www.subsim.com/radioroom/show...8&postcount=73




:Kaleun_Salute:

Really good job ericlea :Kaleun_Applaud:

I have one question. I understood, x6 zoom isn't correct, so raob users have to take x5,4 or x10,8.

Is there a difference for using the rings if I use 5,4 zoom or 10,8? I know you have to do something a bit in another way if you used x1,5 zoom or x6 zoom in OLC. Is there something i have to be aware of with you zoomlevels?

Thanks alot for your good work.

https://www.youtube.com/watch?v=4JQbA-BgWD4



Hi !


It seems that in ARB widegui measures at zoom x6 are correct for raobf discs use.



Attack Periscope :


at zoom x6, each graduation mark = 1
(example : if the high is 7 marks you have to take 7 on the raobf middle ring, lower numbers)



at zoom x12, you have to divide by 2 so each graduation mark = 0.5
(example : if the high is 7 marks you have to take 3.5 on the raobf middle ring, lower numbers)



and at zoom x1.5, you have to multiply by 4 so each graduation mark = 4
(example : if the high is 7 marks you have to take 28 on the raobf middle ring, lower numbers)


To train you, go to naval academy torpedo mission, there is a static ship in front of you at 800m




EDIT : I change max zoom level in Obs and Attack periscopes. Now with CTRL + mouse wheel, max zoom is x12 (no more 10.8)

New Update 22 january 2019 :





For persicope RAOBF discs users, in ARB widegui, zoom at x1.5, x6 (and now x12) are functional and the measures are correct



With CTRL + mouse wheel, you can go to max zoom x12 in Obs periscope and Attack periscope. (normal zoom levels without "Ctrl+mouse wheel" are unchanged)





Updated link 22 January 2019 to Post 1 :
http://www.subsim.com/radioroom/showthread.php?t=239167




:Kaleun_Cheers:

:Kaleun_Thumbs_Up: Thanks for your answer and the update.

Patch WAC 5.2 officially released today (Thanx Hansolo !)


Then


New Update 28 january 2019 for Optimized ARB-Ahnenerbe WideGui 1920x1080 for WAC5 :


https://i36.servimg.com/u/f36/19/84/56/02/intro11.jpg


Updated link 28 January 2019 to Post 1 :
http://www.subsim.com/radioroom/showthread.php?t=239167


:Kaleun_Cheers:

Hi ericlea,

question regarding the RAOB Ring ... I'm missing the tactiles next to the crosshair like in the video you posted above. It's a bit hard to identify the right tactile. Is this a bug in may case?

I use the ring for all the measuring (speed, distance, AOB) so these tactiles are really important for me :salute:

Hi i dont understand exactly what you describe.
With training all the measures can be done easily.