:cool: I was thinking of doing that very thing. Problem is, I'm not sure which images to swap out. Can you list them?

Makman94, it works flawlessly now:up:

no Bybyx....it is impossible to make it as a stand alone mod becuase it uses the menu_ini but what is possible to be done is to make a DIY walkthrough. but don't expect it soon becuase there are other priorities for me right now as to prepare the version for lsh3 v5 and the german versions of MaGui.
in the meantime send over a pm to Kara,as being the author of the gui you are using it will be much faster for him to import it

will look at it asap(but don't expect it soon). is this its final version ? if not....better wait
in the meantime try it yourself .here is a thread that will help you: how to make your gui compatible with Flakmonkey & DD's mod

:up:

thats very easy to find out Munchausen ! navigate through the files of MaGui 3 and everytime you see an image with rust ....replace it with the correspoding image from bright MaGui 2+ or Dark MaGui 2+

:cool: And so I did ... this is what I ended up with (some files might not actually be "rusty" ... but, hopefully, I didn't miss any that are):

data\Menu\Data:

• none

data\Menu\Karamazov:

• none

data\Menu\MouseCurs:

• none

data\Menu\U-jagd:

• none

data\Menu\Gui:

• AMBack.tga
• Periscope.tga (same for optional-stopwatch fix)
• Periscope2.tga

data\Menu\Gui\Layout:

• manos2.tga

data\Menu\Gui\RecManual:

• none

data\Menu\Gui\TDC:

• TDC.tga

data\Menu\OLC:

• Bottom.tga
• BottomReversed.tga
• Console.tga (same for No Stealthmeter fix)
• Dials.tga
• manos10.tga
• ObsScope.tga
• Officers.tga
• TDC.tga
• UZO.tga (same for optional-stopwatch fix)

data\Menu\OLC\Shortcuts:

• none

What a wonderful mod
 

Hey, Markmann:

I must say thanks, VERY,VERY MUCH, your MaGUI mods. I'm relatively new to SH3 -only 6 Mo-but have tried all the supermods and many other smaller mods. How could I missed yours for months? I've been testing your mods-from the original to the latest-including the optionals, reading txt/pdf docs and subsim's fora posts, watching tutorials, actually studying to learn all the marvelous tools included in your mods. I think they are a MUST for a serious, hardcore player-I'm still not in that category-for the historical accuracy and the inmersion level they provide to the player. I'm still learning, a bit confused with so many variants, but above all, ENJOYING IT A LOT!

I've searched but found no answer to this Q: are your mods compatible with DD's conning tower open hatch mod?

Regards,

rea00cy

Re: Widescreen version of Magui...

I've been studying it for days. I'll be glad to help with this effort, since I'm attempting to do this for myself anyway. I've got the viewports nearly corrected for the uzo, obs and attack scope.

The uzo and obs accepted a straight formula (for instance new value for right viewport is (lVal * 1024/1365) + (rVal - lVal)) , but for some reason it didn't work with the attack scope. I've gotten that one close enough to be a single fat line.

The formula did also not work for the deck gun zoom, but I have not even started to look at that. This may take a while, but look at all that room...

(nearly) corrected attack scope
http://www.coolpup.com/silenthunter/...ttackscope.jpg

with the conning tower open hatch mod:
http://www.coolpup.com/silenthunter/...nninghatch.jpg

It's basically an introduction to modding for me... and still almost everything yet to learn! It probably took me 8 hours to get the red tdc button to go off the screen in the periscope view, lol.

So Makman, if you get the chance, I'll be happy to help, whenever you decide... I'm sure I'll still be working on it when you do. :DL I'm actually surprised nobody has this done already!

hi Munchausen,
yes...these are the images but not that the TDC.tga (the one that is in data\Menu\Gui\TDC ) can't be replaced by the previous one (you will 'miss' the correct -according to the real one tdc- dials for bearing and aob)


hi Rea00cy,

and i must say thank you too ,sir :up:. enjoy it

hi Flopper,

for the attack peri : your fault is that you didn't notice that the left value is not 0 so you must edit this value also .

the number '1365' that you mentioned is not correct . you must use the 1360 ( this is the number that it is in the dll right ? )

also at uzo...if you edited only the right value this is wrong too (notice that once you enter for first time the uzo is not pointing at zero now...right? )

here is how to adjust the viewport values :

example: at attack peri :

left=0,1230469 that give us 0,1230469x1024=126 pixels.
now, to find the new value you have to divide the pixels by 1360 ,
126/1360=0,092647 <-----this is the new value that you must set at left


right=0,6992188.......0,6992188x1024=716 pixels .....716/1360=0,5264705

so the values for the attack are : left=0,092647
right=0,5264705

you must do this to all viewports that you are looking through an 1024x768 image ( uzo ,obs ,bino ,attack ) .wherever you see the ''1'' at right value you must edit that too replacing it with 0,7529411 (1024/1360=0,7529411) but only at the screen which uses 1024x768 images.

you didn't have to spent your time(although this is good for you to learning moding) trying to 'dissapear' the red button as all these panels will be removed at the new edge of the screen so you have only to edit the menu_ini and just replace the corresponding items .


Flopper,this mod opens new ways in gui designs and if and when there is a MaGui 4 for widescreen will not be the same as MaGui 3.


@ Rubini : i have two problems with the widescreen mod.
1. it doesn't 'full' the monitor ...leaving a pretty big black frame around the game's screen.
2. i have the feeling that in the game's screen [which is 'small' ] the images are a little bit stretched.i can't take a pic to show you what i mean becuase when i look at the pic everything looks normal (no black frame around the game's screen and no stretched images) but it is not so in-game.
is there anything i can do for that ?

Hi makman !

Sorry for my question :oops:, but "When is soon" ? :D :yep:

Best regards,
Magic:salute:

I adjusted both left and right values, using a formula approach (I noticed the values had remained unchanged from the original OLC mod) but it was still way off.

This is the number in the dll, correct, but exactly 16:9 is 1365 x 768. Also, I get a CTD if I don't use 1365 for my resolution. I can try the 1360 number and see how that works with the formula.

No, I entered both values and it's perfect. I was not clear in my previous post, and only gave the right value as an example.

Perhaps it's my hardware, but using these values for the attack scope puts the "center" at quite a few degrees to port. The values I have now are left=0.1375 and right=0.4795.

Yes, I'm sure, but I must have magui on widescreen, and can't wait! :haha: Also, as you mentioned, just for the experience.

If you are using nVidia, you'll need to use nVidia scaling to fill the screen. There is a problem with some ATI cards I believe where the images get streched, but vertically (egg shaped).

:up: Thanks for the correction, Makman. I'll put that one (version 3) TDC file back where it belongs.

Makman

Once again Thanks for your great Mod Ijust started a new mission with it in place I think the graphics and interface is superlative. I really like the big compass.

I have one question that may have been addressed before. Am I able to use SH Commander's sabatoge and malfunction selection while using your mod? Thanks in advance, and sorry if I am old ground.

Brer Rabbit

hi Magic,
i can't say exactly becuase its not depending only by me but it will not take long...i guess one week

hi Brer Rabbit,

i can't answer your question becuase i don't use the commander so i have no idea at all !

Hi makman !

That sounds very good ! :up: And thank you for your Reply ! :yeah:

Best regards,
Magic:salute:

I would say that this would happen on the previously standard 16:10 monitors because 1366*768 is the 16:9 resolution which leaves you with black bars on top and bottom if the aspect ratio is maintained. The standard 16:10 resolution would be 1280*800, but I guess it's too much work and I don't mind the black bars (with 4:3 1024*768 I had much bigger black bars to the left and right, anyway).
The Nvidia Control Panel contains the option like Force Aspect Ratio or something which works rather well, but I'm not sure what it looks like on ATI.

MaGui v3.1 is out !

first post is updated

ps: Happy Easter to all Christians at forum !( and best wishes for all the others ! )

Beautiful mod. Great work.

Thank you very much makman for your excellent work ! :up::yeah::up:

Best regards,
Magic:salute:

makman94, this is amaaaazing! :rock: One more step closer to perfect SH3. :)

:salute: Its nice to get this GUI.
Thank you Sir.

Thanks Makman, excellent job as usual...:up: