SUBSIM Radio Room Forums

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)
-   Silent Hunter III (https://www.subsim.com/radioroom/forumdisplay.php?f=182)
-   -   The Enigma Room (https://www.subsim.com/radioroom/showthread.php?t=113339)

P_Funk 04-27-07 06:42 PM

Quote:

Originally Posted by rb4door
I worked out what went wrong P funk - by the nature of how each rotor works, if I understand correctly, every time you press a letter it turns the relevant rotor one position forward. You can only hit each letter once from the starting order for the message to decipher properly. Here I was thinking in 21st century logic that you could repeatedly press a character as if it were electronic, and it would repeat the same encoding. I'm not sure if that made sense, but I've worked out what I did wrong :p

Basically you cant start trying to decode your message again (if you muck up half way through it) unless the "Walzenlage" are in the correct beginning position.


Quote:

Originally Posted by P_Funk
Okay just a silly little one here.

DXGK QQAP QQFQ AWWG INC

:lol:

Is it naughty to use the previous message reel code to encode another? :hmm:

RBFD VANC ZJGP BTKM KDME JSIS XQWO ZWSH GKU

I have no idea what that means.:o

I don't think I'm decoding it properly.

rb4door 04-27-07 07:54 PM

Quote:

Originally Posted by P_Funk
Quote:

Originally Posted by rb4door
I worked out what went wrong P funk - by the nature of how each rotor works, if I understand correctly, every time you press a letter it turns the relevant rotor one position forward. You can only hit each letter once from the starting order for the message to decipher properly. Here I was thinking in 21st century logic that you could repeatedly press a character as if it were electronic, and it would repeat the same encoding. I'm not sure if that made sense, but I've worked out what I did wrong :p

Basically you cant start trying to decode your message again (if you muck up half way through it) unless the "Walzenlage" are in the correct beginning position.


Quote:

Originally Posted by P_Funk
Okay just a silly little one here.

DXGK QQAP QQFQ AWWG INC

:lol:

Is it naughty to use the previous message reel code to encode another? :hmm:

RBFD VANC ZJGP BTKM KDME JSIS XQWO ZWSH GKU

I have no idea what that means.:o

I don't think I'm decoding it properly.

hmmm, I redid it about 5 times to make sure I got it to work.

Using the 27th setup for the enigma, did you start with RBFD as the starting point, then decode VANC to get the new starting position of the rotors to decipher the message from ZJGP onwards?

I copied the same method you used for "GOCANUCKSGO"

I'll try it again this morning when I have time to set up the Enigma again.
I am a noob at this, its possible I did it wrong.

P_Funk 04-27-07 08:25 PM

Quote:

Originally Posted by rb4door
Quote:

Originally Posted by P_Funk
Quote:

Originally Posted by rb4door
I worked out what went wrong P funk - by the nature of how each rotor works, if I understand correctly, every time you press a letter it turns the relevant rotor one position forward. You can only hit each letter once from the starting order for the message to decipher properly. Here I was thinking in 21st century logic that you could repeatedly press a character as if it were electronic, and it would repeat the same encoding. I'm not sure if that made sense, but I've worked out what I did wrong :p

Basically you cant start trying to decode your message again (if you muck up half way through it) unless the "Walzenlage" are in the correct beginning position.


Quote:

Originally Posted by P_Funk
Okay just a silly little one here.

DXGK QQAP QQFQ AWWG INC

:lol:

Is it naughty to use the previous message reel code to encode another? :hmm:

RBFD VANC ZJGP BTKM KDME JSIS XQWO ZWSH GKU

I have no idea what that means.:o

I don't think I'm decoding it properly.

hmmm, I redid it about 5 times to make sure I got it to work.

Using the 27th setup for the enigma, did you start with RBFD as the starting point, then decode VANC to get the new starting position of the rotors to decipher the message from ZJGP onwards?

I copied the same method you used for "GOCANUCKSGO"

I'll try it again this morning when I have time to set up the Enigma again.
I am a noob at this, its possible I did it wrong.

Nono. I did it wrong, somehow.

I rechecked all my settings, they were right. I guess I set the starting point wrong.:damn:

Anyway.

SCUP JYEH ENUX VJCZ TSJX QRRS DHHZ HEDR WMGS RSBY E

rb4door 04-27-07 09:26 PM

Tag 27:


OFJC HSZW GDQT BWFQ TWSQ ZUZL VEKH SMAQ IVKJ NXAV YNCU SWIT QIPP FMZV HVHF XKEY POTB DYVX DUJQ CBJL IJUK LYZF IMDJ TRLE ZSWV KRGL JZPB CPWG IZAI JIUG CZYM DNBK APLB T

P_Funk 04-27-07 09:55 PM

Lets say for the moment that we state the date before the message. Later we can determine if we want to set a universal time like the international date line or some other way of standardizing it.

.- .--. .-. .. .-.. / ..--- --... / --.. - --. .--. / .-- -... --- ..-. / .... --.. .- ...- / --.- .. . .-.. / -.. -- -.-- -. / -.-- ...- --.- --- / --.. --.. . -.- / -.-- -- - -.- / .-.. . -.-. .... / ..-. -- -.-. --.. / - --.- ...- .- / -.-. .. -... -- / -.-- -.- .... -.. / . . --. -.. / .--- . -.. -.-- / ..- .- -.- --- / .. .--- .-.. --. / .... -..- ...- .-- / .-- .-. -.. ..- / ..- --. --.. . / --. --.- -.-. .--. / -. ..-. -. ...- / -.- --- --. .... / - .--. -- .-- / --. ..-. .--- .-. / ...- --. -... .... / --- ... -. -.-- / .. .-. --.. .--- / .-- --. - ..-. / .- --.- .-- --. / -... .. -... --.. / ...- .-- -... -.-. / -.. --. -.. ...- / - -... ..-. .- / -.-. ..- .... -.-- / -.- -..- .-.. --. / -... -.. -. -..- / ..- --. -- -.- / --- ..-. .-- . / ..- -... .-.. ..-. / .--- -.-.



Another curve ball for you gentlemen.:cool:
http://morsecode.scphillips.com/cgi-bin/morse.cgi

HM.Medico 04-27-07 10:34 PM

Wow, I've created a craze...GO ME!:rock:

Edit: Now for my message

Tag:28th (naturlich)
WDHZ NKUE
CLA VTFE TBDH EWXY GXVE VQJO KSDO IOJV UQFT IKOA HGUV YWEF USKP EMIU DXJN YVCY EYBF RBYP WMKQ SZSR ROUP ZHPB WQOU HNJY QRWV KWIX EUCT EYPW JICZ NROV WQPL CZSW FYNT DGVV FTRR QRFL WVVN OCPH FVFE OXHQ GZUZ RVHN FHAY NZUU CEZJ ROTV YJWL LVKU ZVAJ DCLJ YULS YYNB ABPA CAQR OEWG UNXP WECW OOHP JHJI GMGK TEWG HKZK XLRR WJVV KBA

P_Funk 04-28-07 01:50 AM

Medico, your message doesn't translate. I triple checked my set up.

At a glance though the first letter set at the beginning of the actual message, 'CLA', is only a 3 letter group. The only group that can be fewer than 4 letters is the last one.

I think you might have missed pasting one letter.:p

HM.Medico 04-28-07 02:04 AM

Righto then, fixing...

GFYR LZNN

VAXT RCNQ FSKG UJJA IPGW UPHC RMDI MBGY PQPZ JONJ TVTV EDEG ATDX JZKC EWAE CANC PORB PBPZ JNVN NRCW RKGX ACYD MCCI SLUA TUMZ SGVG VFNU UAWS ADWE GDTN JOUX HLOY OYPI AIBF FKYV OWSC XOVN XLKW GIWH OIGJ WUBX MEYF WNNM XSUV HWRF HVXS OQMC LFLB WTHZ QYVS WDAF ATPD PJNS UFGN NFES DWZP ZSVB CPKR PSIK GTWO EMHC BGVN LLCK AFFU NEFN LVJI IGMC QTBA UARQ VORX HHSM MOPN FWDP KGNA EZLY YZB

It should end up with reels GGLM
That oughta do it :D

P_Funk 04-28-07 02:41 AM

I don't want to be a party pooper but I still get garbled letters. I can't even decode the 2nd reel group. I get SLEH.

I've gone over the Tag:28 set up a few times. I'm certain I got it all set up properly. Even when I enter your starting reel 'GGLM' it doesn't give me clear language.

I think you need to go over the codebook again.:hmm: One plug not right or one reflector off by a single digit and you're boned.:p

EDIT.

- .- --. / ..--- ---.. / .... --. .--. .-. / .-.. -.-. -... ... / -.-- .-- -.. .... / --.. .. --.. -.-. / - -.-- ..- . / --- --.. -.-- -.. / -.. ..-. -.- -.-- / -.. ...- --.- .. / - -.. ..-. -- / - -... .-- .-.. / --.- -.. .--- .... / .- .-.. .- --- / .-- ..-. .--. .-- / .--. .... -.-- --. / -..- --.. --.- ...- / ..-

rb4door 04-28-07 02:54 AM

Quote:

Originally Posted by HM.Medico
Righto then, fixing...

GFYR LZNN

VAXT RCNQ FSKG UJJA IPGW UPHC RMDI MBGY PQPZ JONJ TVTV EDEG ATDX JZKC EWAE CANC PORB PBPZ JNVN NRCW RKGX ACYD MCCI SLUA TUMZ SGVG VFNU UAWS ADWE GDTN JOUX HLOY OYPI AIBF FKYV OWSC XOVN XLKW GIWH OIGJ WUBX MEYF WNNM XSUV HWRF HVXS OQMC LFLB WTHZ QYVS WDAF ATPD PJNS UFGN NFES DWZP ZSVB CPKR PSIK GTWO EMHC BGVN LLCK AFFU NEFN LVJI IGMC QTBA UARQ VORX HHSM MOPN FWDP KGNA EZLY YZB

It should end up with reels GGLM
That oughta do it :D

I too have set up Tag 28, and using starting reel GFYR and as P Funk has said, this gives the starting reel of SLEH to decode the message. Decoding from SLEH gives garble. Can you specify your exact settings? I think we should keep following P Funk's code sheet and reel / message encoding method.

rb4door 04-28-07 03:00 AM

P Funk, lets try out Tag 28 and see if we have our settings working correctly :up:


I'll use Medico's start reel for the cipher

GFYR LZNN

ARPL LEMW UNVJ VOMS FWBT TGPN YKEC WZRH YDJL QJKW BLMR DKLQ MMTE AUDP RIJF IUXV LONP UQRI RLVK HJVV CEEV BOFH MZEM QVXQ SFEE SQIG ZZSS SOWV LQVQ YSZL WUUC NKJR ZQJS C

HM.Medico 04-28-07 03:13 AM

I think the starting reel was ILOL...I think...

P_Funk 04-28-07 03:31 AM

- .- --. / ..--- ---.. / ...- .... .-. .- / ... --.. .... ... / ...- -... .-.. .-.. / --- .-- --.. --. / ...- -... -.- -.. / -. -.-- .. ...- / --. .-. .--- -- / .-. ...- .--- .. / .--- ...- -.- .-.. / --- -.- .--. .--- / .--. .- .. --.. / -.-. --.- -.-- -.-- / -.- - --.. ...- / .-. .- ... -. / -..- .. .-. ...- / .-.. --.. --.. --.. / .--. . - --.. / .- --- -.- -..- / .. --. -..- ... / --- -.. ..-. - / - .- .- --.. / -.- -... ...- ..-. / .-- -.- .-. ...- / -.. .- -.. .-- / ...- --. - ..-. / .... .... -. -.-. / .... ... -..- -... / -.. --.- --.-

BTW are you guys actually translating my morse or am I just taking this a little too far?:p

rb4door 04-28-07 03:34 AM

Ok, finally worked out you are actually morse coding the cipher lol - I thought I didnt have the morse code working
properly as i was getting sets of letters !


The Enigma is easier to use now I am using the key saving feature, and the auto type :)


Response on the way - i'll try to morse it aswell

P_Funk 04-28-07 03:46 AM

Yes I encoded the entire message in morse. The link I gave to the morse encoder/decoder will give you a message that reads:

TAG 28 VHRA SZHS VBLL OWZG VBKD NYIV GRJM RVJI JVKL OKPJ PAIZ CQYY KTZV RASN XIRV LZZZ PETZ AOKX IGXS ODFT TAAZ KBVF WKRV DADW VGTF HHNC HSXB DQQ

But I can lay off the morse if you guys like.

EDIT. Just saw your edit. Good luck.

rb4door 04-28-07 03:58 AM

my first attempt at morse - hopefully it works:

- .- --. / ..--- ---.. / --- ... --- -.. / .. -.-. .- .-.. / . .- --. -.- / ...- -... -... --.- / ...- -. .- --- / .-.. .-.. .--- .--- / -.- -..- .. ... / -..- -... -. .-- / .-.. -.- -.-. -.-. / -- .--. .-.. ... / .-- .--- -.-- --- / -... ..-. ..-. --.. / .-. -- -.- -..- / --. -.- -.- .--- / .- -.- - .- / .-.. ...- -. ..-. / ..-. --.. -- .. / ..- .-- .-- -.-- / --- .-.. -.- -. / .- .- -... .... / - .- .-.. .-. / -..- -.- -.. -... / --- -.-- -.. .--- / -..- --.. ... -.-- / .... -.-. .... ..-. / .-. -- .-- --.- / .-. --- .... --. / .--. .- --.. ...- / .-- ...- -.-- ... / .-. --. --- ..- / - -.- -..- --. / .... - --. ...- / .- -. ... ..- / -.-- -- .... ..-. / .-- .--. -.-- -.. / -. . .... --. / .--- .-- --. .... / .--- ..-. --.- -.-. / .-. .--- - -. / ..-. .-- -... -.-. / -. --.. -..- --- / ...- --- -- ... / -. ..-. .- .--. / .- .... -..- ..-. / --.. . --.- .- / .... -- --- -.- / -.-- -.- -- -... / --.. .-- .-. -..- / -.- -.-- -.- .. / .-.. ..-. .-.. .- / -- .--. .. .--- / ..-. .- -.-- --. / ... --.. -.- .... / -..- - .- ..- / --.. ..- .--- .- / ...- -.-- .--. --.- / -. -- -.-. .. / .-. . --. .. / ...- .-. --- ...- / -.-- .. ...- .-. / -.. .. -.. -..- / -..- .-.. --- ...- / ..- .--. . --. / -.. -... .- -. / ..- -.-- --.- --. / --.- --- .-.. -- / --- --. .-. ..- / -. .-- - - / -.. -... .-.. --. / .--- --. .-- -..- / .--- .- --- --. / -... -.. .... --.- / --.- ... -.-. ... / --. -..- .-.. .... / ..- -.-. -- .-- / - -... .--. .- / -- .--. --.. .- / . . .... - / .-.. - -.-. . / . -.- .--

P_Funk 04-28-07 04:11 AM

- .- --. / ..--- ---.. / .--- -. ..-. - / .--. .- ...- ...- / -.. .... .--- .-- / .. ...- -.. .- / . --.. ...- --.. / -.. .--. .... -... / --.- ... .-. --. / -.- ..-. .-- -. / .--. .--- -.-. --.. / -... .-- -- -..- / ... .--. .-.. . / --.- ..-. -.- .-. / .-. -... --. .--- / .-. --. .- .. / ...- -.-. .... --.- / -.-- .--. --. .-- / .... -.- --.. .--. / -.-. -- .--. --.. / --.. -. --.. ...- / . .. ...- --- / -... -... -- .--- / -... --.- ..- .--- / ...- --.. -... .- / -. -.-. -.- .. / --. -.-. -... ... / .. .--. - --.. / -.. .. .. .--- / --- .--- -.- ..- / .-- -.-. --.- ..- / - -. -.- --. / .... .-- .-- .- / -.. ..- -.-- .--- / --.. ... .--- .--- / -.. -..- ..- ..- / --- ..- --.. -.- / .-- -..- --. .-- / -.- --- --.. -- / .-.. .--- --. .-.. / - .... - .- / -. .--. .... ...- / -- ..- .. .-.. / --.. ...- .- ...- / ..- --.- -.-. --.. / ..-. .--. --- .-.. / -.-- -- -- --.. / .-.. --. ... --.. / .-- .-- ... --.- / .- .-- -.-- --. / ..- .-.. --. ..- / --- -... .. ..- / --.. .... .--- .-.. / .- -.- -.-- -.. / .-- -.-. ..-. .--- / .... -.- --.- -.-- / -.- .--- --- ..-. / - ...- .- -. / -.- .-. -..- --.. / --- -.-. -.. --. / .-.. -.-. .. .-- / -- --.

Your first attempt was flawless.:up:

I imagine a noob walking in on this and seeing all the dots and dashes getting a funny look, freezing, and sloooooowly backing out the door. :o

HM.Medico 04-28-07 04:33 AM

To be honnest this morse thing is annoying, But I'll put one none the less

.../---/...

rb4door 04-28-07 04:34 AM

The morse is cool medico - its amazing when you think abouthow we can change a simple message so much.
Everyone probably needs to get a grip on the Enigma first though, otherwise yes, the morsed messages may seem a bit too much.

P Funk:

- .- --. / ..--- ---.. / . - --- -- / -... -- .- .--. / --. -... --.- .-- / .-.. .. ... .... / .-.. - - --.- / .-.. --- ...- -... / .--- .--- -... .--. / --.. ...- .- ...- / -. -.- -... .--. / .- ... -.- ... / .--. -- .... .... / -... .... -.-. -..- / ..-. .--- -.-- .. / -.-. .-. -..- ..-. / -.- .- --. - / --.- ...- ..-. .- / -.-. ..-. .... .-- / .--. ..-. .--. .--- / ... -.- -.- --.. / .. .--- -- --. / --.. -. -..- -.-. / -.-- .--- .--- -... / -... -.-. -... -.- / .--- -... .-.. ...- / -.-- -... ...- .--- / -.-. -... -..- . / .... --.. --.. ... / -.-- . .- .... / --.. .--- .- --. / ..-. --.. ..-. -... / -- -.- --. ... / . .-. ...- -.-- / -..- .-- --. -. / .-.. --. . -.- / .--- -.. - --- / --.. .-. -..- -.- / -- -.-- ..- .-. / --- -.-- .-. --. / .-- .... .-. ...- / ..-. -. --.. .-- / -.. -.- -..- - / --.. ... --.- -.-- / -- .-.. --- . / . -.- . --.. / --. -. -.-. ...- / -. --.- --. .- / --.- -. --.- -..- / . .... ... - / -. -.-. --.. -.-- / .. -- .- ... / ..-. .--- .--- .--. / --- .. --. - / .--- .--. -. .--- / ..-. -... .--- .--- / ..- --. -... .-.. / .-.. .-.. .- .-. / . --- .... ...- / .-. . ...- .-. / -.-. .... .--. -..- / ..- -.-. --.- --.- / .-. .--- .-.. .-. / --.. ..-. ..- -- / --.. -.-- --.- .- / ..- --- .. -.-. / ...- .--- .-.. -.. / -.-- -.-. --. .-- / -.-. ... -- -... / - --.- -..- -.-. / .- -... ... -.- / .. -..- --.- .- / --.. ...- .--. - / .... --.- ..- .-- / - --- - ..- / .. . --.- -.- / -... ..-. . --- / -.-. --.. -.. --.. / ..-. --. ... .--- / .. -... ..- .-- / . --- -... --.- / .-- .--- --. .--- / .--- .--. --.- -.--



:|\\

P_Funk 04-28-07 08:26 AM

From now on ladies and gentleman we are going to start using the Kriegsmarine abbreviations for punctuation, that is if you'd like to. It should hopefully make messages much easier to read once they're decoded.

X = Period
Y = Comma
UD = ?
XX = Colon
YY = Dash/Hyphen
KK = Parentheses

To use them however you`ll need to enter them as their assigned values: ie. in your original message before its coded exchange any periods with an `X`.

Quote:

See Spot Run.
becomes
Quote:

See Spot RunX
To get your simulator to decode those characters automatically, click the white output text scroll that appears at the bottom of the machine. It gives you option for decoding. Deselect "Copy as Groups" and then that allows you to select "Convert Abbreviations".

To keep the neat 4 letter groups for posting your code have the output set to `Group` when coding and set it to `Convert` when decoding.

Tag 28 KNPM QBIL RYZZ VTZR CVDD IFUC JKCT FYHQ VQQM MKIY SJMQ VVRV FOXC DXKB RJZA IAIJ HXAE RXLN BPIG OMPP YIXJ EWDK BBTL FQDC KWYW IROJ KXXV USMX DQZN JPQM TWT


All times are GMT -5. The time now is 02:22 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.