Yup, your right

For interior view, some one made a free video of his visit at u995 found on some networks ^^!
as promise
here is the video

http://dl-1.free.fr/52616e646f6d4956...8e301/u995.zip


(available for 24h )

Just a quick note about the curved bulkheads in the Type 7's control room. They were curved slightly, becasue these two bulkheads were the only 'pressure tight' bulkheads on the boat. The 3 other bulkheads were only water tight, and this can be seen by the fact that these bulkheads (between the forward battery compartment and the bow room, between the after battery compartment and the diesel engine room and between the diesel engine room and the electric motor room) are 1. 'straight' i.e vertical and 2. have large rectangular hatches. The two curved bulkheads at either end of the control room have small circular hatches, to better resist water pressure. Up till recently pressure tight bulkheads have often been slighlty curved (it gives greater strength without needing the heavy reinforcement and scantlings a straight bulkhead would require). Soviet SSK designs up to the Kilo had curved pressure tight bulkheads AFAIK.

Sniper_1

Perdu, IE says link not valid for the video. It could be just me tho.

Ducimus, Letum.... I forgot about being able to change the file names so they'll work with other boats interiors. Sorry about that.

well i tried just now ( with opera) and it worked O_o

isnt wiorking for me

i will search an other way because if i put a url at home my connection will be illed by downloads lol

You may wan´t to check this.

http://www.squadron.com/ItemDetails.asp?item=cws004

Looking at all the pictures posted, as compared to whats ingame, anyone else notice that, with the exception of the XXI control room, the lack of periscope wells in the default interiors? At the least, in reguards to the type 7. I think the type 9 interior has one, but its rather small.

For some fine info about this sub, you might want to contact some indie developers your self, they both have been trying to make a VIIC sim.
I'm sure they have tons of info that you will find usefull.

http://web.telia.com/~u51008935/VIIC...c_project.html

http://www.mp-labs.com/r1l/

Good luck!

Hey i think i found something.

http://www.9teuflottille.de/index2.html

Go to "wissen" and then "bootesplan".

DOWNLOADABLE BLUEPRINTS!!

Individual links:
http://www.9teuflottille.de/site/lex...yp_viib_l.html
http://www.9teuflottille.de/site/lex...yp_viib_g.html
http://www.9teuflottille.de/site/lex...p_viic_g1.html
http://www.9teuflottille.de/site/lex...p_viic_g2.html
http://www.9teuflottille.de/site/lex...yp_viid_g.html
http://www.9teuflottille.de/site/lex...yp_ixd2_g.html
http://www.9teuflottille.de/site/lex...typ_xxi_g.html

Re: Interior Project
 

I hope these would be helpful for you.

http://img234.imageshack.us/img234/3...kcow4zf.th.jpg http://img234.imageshack.us/img234/9...peii3zs.th.jpg http://img234.imageshack.us/img234/1...arine19.th.gif

http://img234.imageshack.us/img234/7...viic6xj.th.jpg http://img234.imageshack.us/img234/1...wiisubm.th.jpg

Check here --> http://www.dreadnoughtproject.org/ , there is many original plans.
Good luck.

Hi Letum,

If you're still looking for a cross section plan for the Type VIIC, see if this is what you need.

Type VIIC (1944)
http://img58.imageshack.us/img58/316...section4kg.jpg

Here's the link if the pic above didn't show
http://img58.imageshack.us/img58/316...section4kg.jpg

This was just a quick photo I shot with my digital camera so the quality is low just for display only. If you need it, I can scan it and post a link.

I have a few more plans for the Type VIIC (1944).

Happy modelling!
:arrgh!:

Im good for plans thanks. I have had a very genorus donation of high detail plans :D
Thanks anyway