SUBSIM Radio Room Forums - German U-Boats Compilation

Page 17 of 38

« First

Last »

Show 20 post(s) from this thread on one page

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)

- SHIII Mods Workshop (https://www.subsim.com/radioroom/forumdisplay.php?f=195)

- - German U-Boats Compilation (https://www.subsim.com/radioroom/showthread.php?t=214215)

Fubar2Niner

04-04-20 06:19 AM

@fifi

Many thanks shipmate:up:

Now to try learn how to do this myself ;)

Best regards.

Fubar

hauangua

04-04-20 06:23 AM

Quote:

Originally Posted by Fifi (Post 2660040)

Ok, here it is: http://www.mediafire.com/file/9k00yz...or_GWX.7z/file

For use with:
FixAllSubGWX
TKSS18 German U-Boats Compilation 1
TKSS18 German U-Boats Compilation 2
New U-Boat Guns Fixed Reworked (for German U-Boats Compilation)
U-Boat Compilation Waterstream Fix
German U-Boats Compilation 2 (only VIIB & VIIC models by WISE)

Activate on top of all :up:

Thanks fifi :saluto:

Fifi	04-04-20 06:49 AM

If you are using the German U Boat FUMO fix SNS, here is a new one with GWX values : http://www.mediafire.com/file/vyt3ub...NS_GWX.7z/file

Just because this fix use also a sensor.dat file...now it is adjusted for GWX.

Activate last as this order:
FixAllSubGWX
TKSS18 German U-Boats Compilation 1
TKSS18 German U-Boats Compilation 2
New U-Boat Guns Fixed Reworked (for German U-Boats Compilation)
U-Boat Compilation Waterstream Fix
German U-Boats Compilation 2 (only VIIB & VIIC models by WISE)
German UBC_FuMO_Fix_SNS_GWX

:Kaleun_Salute:

Fubar2Niner

04-04-20 07:11 AM

@ Fifi

Thank you again mate :Kaleun_Salute:

Regards.

Fubar

John Pancoast

04-04-20 07:52 AM

Quote:

Originally Posted by Fifi (Post 2660015)

Well, on other hand that’s a shame because it’s adding a fantastic looking to GWX :yep:

If you want, i can upload to Mediafire the new sensor.dat adapted for GWX if you need it.

I know I had it installed at one time. But I don't really care about walking the length of the boat (did it a few times, then didn't see the need anymore) or other parts of the mod.
I just use Diving Duck's mod to get the same command room affect as this mod and that works for me.

Fifi	04-04-20 08:13 AM

Quote:

Originally Posted by John Pancoast (Post 2660077)

But I don't really care about walking the length of the boat (did it a few times, then didn't see the need anymore) or other parts of the mod.
.

don’t understand what you mean by walking the length of the boat :06:

Jimbuna

04-04-20 08:20 AM

Quote:

Originally Posted by propbeanie (Post 2659899)

Do we happen to know of someone who could possibly write a script to at least scan the two dat files for a comparison that would be better than using 60+ y.o. human eyes?... may-haps?... :yeah:

Over the years I used to use WinMerge.

propbeanie

04-04-20 08:27 AM

WinMerge is excellent for text files JimBuna, but I'm afraid to use it on binary files since I cannot translate the differences.

@ Fifi: John Pancoast just means stepping through each node and comparing it to the corresponding node in the other file.
:salute:

divemonkie

04-04-20 08:52 AM

Quote:

Originally Posted by Fifi (Post 2660052)

now you've gone and made me happy again.
Thanks Fifi I'm gonna go re-stack and SEE if I cant sink something.

these boats make SHIII and GWX look amazing.

John Pancoast

04-04-20 09:01 AM

Quote:

Originally Posted by Fifi (Post 2660089)

don’t understand what you mean by walking the length of the boat :06:

If I recall you can open the command room hatches and walk the length of the boat in the TSS mods via the shift-f2 key (is that right anyone, can't remember which) and arrow keys.
Like Flakmonkey's work.

Fifi	04-04-20 09:40 AM

Quote:

Originally Posted by divemonkie (Post 2660106)

now you've gone and made me happy again.
Thanks Fifi I'm gonna go re-stack and SEE if I cant sink something.

these boats make SHIII and GWX look amazing.

You’re welcome mate!

Quote:

Originally Posted by John Pancoast (Post 2660113)

Yes of course you can do that, but the main interest of German UBC is the new U-Boat models, their look is night and day vs before...
Polygones and textures are just amazing. It brings SH3 U-Boats to the SH5 level, with of course more U-Boats types than SH5.
Only the type II interior gauges are not good for me, and i replaced them by the ones from LSH3.
I just couldn’t play GWX anymore without the German U-Boat Compilation.
A shame it’s not available for LSH3 and Ccom12...well, it could be done but would require many month work :yep:

John Pancoast

04-04-20 10:03 AM

Quote:

Originally Posted by Fifi (Post 2660117)

You’re welcome mate!

Yes of course you can do that, but the main interest of German UBC is the new U-Boat models, their look is night and day vs before...
Polygones and textures are just amazing. It brings SH3 U-Boats to the SH5 level, with of course more U-Boats types than SH5.
Only the type II interior gauges are not good for me, and i replaced them by the ones from LSH3.
I just couldn’t play GWX anymore without the German U-Boat Compilation.
A shame it’s not available for LSH3 and Ccom12...well, it could be done but would require many month work :yep:

Ah, if you mean the external sub views I don't use that much either. What can I say; I still think AOD graphics are fine. :D

Hell, I don't even have a cell phone !

Fifi	04-04-20 10:40 AM

:) i agree for external view (except for nice screen shots) but when staying on conning tower deck, it’s an other world too :yep:
Anyway, principal is to get fun no matter what! :D

Jimbuna

04-04-20 11:41 AM

Quote:

Originally Posted by propbeanie (Post 2660098)

WinMerge is excellent for text files JimBuna, but I'm afraid to use it on binary files since I cannot translate the differences.

My apologies I slightly misread your post as text and not dat.

propbeanie

04-04-20 11:55 AM

Apology not necessary, good sir! I do appreciate that though, and I completely understand the "slightly misread", only I usually do a "fully misread". :salute:

Jimbuna

04-04-20 12:17 PM

:up:

Fifi	04-04-20 01:45 PM

Thinking about it, i think there are also others parameters to adjust back to GWX values...because many files involved in this German Compilation mod overwrite GWX ones...have to look closer.
If successful, i may release a complete mod compiling all this, so people would have only one mod fully GWX compatible instead of 5...hence avoiding order list errors.
:Kaleun_Salute:

Kpt. Lehmann

04-04-20 03:32 PM

Sorry for my apparent laziness here. I'm actually multi-tasking sort of badly at the moment lol.

Could I ask a favor, that someone post here, the exact order to install all the related files for GWX, to get the whole shabang in the right order and functioning? (Including the AI subs?)

I need to see the whole lot put together so I can eventually find ALL of the exact compatibility issues for GWX users. For all my reading on the matter, it doesn't seem quite clear to me.

Fifi	04-04-20 04:01 PM

Quote:

Originally Posted by Kpt. Lehmann (Post 2660220)

I have the all gang activated like this:

FixAllSubGWX
TKSS18 German U-Boats Compilation 1
TKSS18 German U-Boats Compilation 2
New U-Boat Guns Fixed Reworked (for German U-Boats Compilation)
U-Boat Compilation Waterstream Fix
German U-Boats Compilation 2 (only VIIB & VIIC models by WISE)
German UBC_FuMO_Fix_SNS_GWX

The last one beeing adjusted by me with GWX values (sensor.dat)
Original name was German U-Boats Compilation FuMO_Fix_SNS
The FixAllSubGWX can be in whatever place as nothing overwrite it...

:Kaleun_Salute:

Anvar1061

04-04-20 04:27 PM

Quote:

Originally Posted by Fifi (Post 2660228)

German U-Boats Compilation 2 (only VIIB & VIIC models by WISE)

I hope you know that this project has not yet been completed. I would not recommend combining it with the previous ones.

All times are GMT -5. The time now is 11:35 AM.

Page 17 of 38

« First

Last »

Show 20 post(s) from this thread on one page