SUBSIM Radio Room Forums

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)
-   SH4 ATO Mods (https://www.subsim.com/radioroom/forumdisplay.php?f=234)
-   -   VIIc engine-room (https://www.subsim.com/radioroom/showthread.php?t=153853)

Tomi_099 10-20-09 08:33 PM

Quote:

Originally Posted by NZsnowman (Post 1192383)
http://img3.imageshack.us/img3/1306/new1zb.jpg

Hi Tomi

Not sure how accurate you want your 3D model, as I noted you have 3x3 nuts on this cover. Anyway I just finish the lower engine covers and there 5 nuts along the lower edge at equal spacing. And 5 nuts on each side of the cover but not space equally. The nuts in the orange area I am unsure of, as I have not see them in any pictures yet.

Happy drawing, Simon.

:03:
Your version is correct.
There are several variants.
Yours is the VIIC41.

Mine is out of the VIIC and it will also give yours to .
Since I have two build options you're going to pass away
The VIIC and see again the VIIC41.
... Or more accurately, the past and later Varant ..

.
http://img62.imageshack.us/img62/6900/viic1180.jpg

NZsnowman 10-20-09 08:52 PM

Thanks Tomi. I thought this maybe the case between the VIIC and the VIIC/41 covers :DL It look like they added more nuts, 2 per side to help hold on the cover better in the later variants.

Tomi_099 10-21-09 03:42 PM

Question
 
After a small break I've taken the work again.
My wounds have not healed yet, but with small steps we continue again.

I have a question to the U-boat experts.
A slightly older variant of this diesel, not in Laboe (VIIc41)
is another variant has the control box.

Which has in Laboe (VIIc41) two small windows, and I suspect that the entire control box is also slightly larger.

The slightly older version I guess has only one window, and I suspect that the box
This also is somewhat smaller.
In this drawing, only one window is displayed (which is not visible here)
What you see is the control box of the variation in Laboe (VIIC41)
:hmmm:
I am looking for something pictures or drawings of the old version, or maybe there is another variation.

Pleas Help for your VIIC –Engine !!! :yeah:

----------------

Nach einer klein Pause habe ich die arbeit wieder aufgenommen.
Meine wunden sind noch nicht verheilt , aber mit kleinen schritten geht es wieder weiter.

Ich habe eine frage an die U-Boot Experten.
Eine etwas ältere Variante von diesen Diesel, also nicht die in Laboe (VIIc41 )
ist hat eine andere Variante von den Steuerungskasten.

Die in Laboe ( VIIc41 ) hat zwei kleine Fenster und ich vermute das der gesamte steuerungs- Kasten auch etwas größer ist.

Die etwas ältere Variante vermute ich hat nur ein Fenster und ich vermut das der Kasten
Dadurch auch etwas kleiner ist.
In dieser Zeichnung wird nur ein Fenster dargestellt ( was hier nicht zu sehen ist )
Was Sie sehen ist der Steuerungskasten der Variante in Laboe ( VIIC41 )

Ich suche um Bilder oder Zeichnungen der Alten Variante oder vielleicht gibt es noch eine andere Variation.
.

.

http://img29.imageshack.us/img29/882/viic180.jpg

.




.
http://img10.imageshack.us/img10/7307/viic182.jpg

NZsnowman 10-21-09 04:07 PM

Hi Tomi, I will have a look through all my books and pictures and see if I have any pictures for you :DL

Simon

ivank 10-21-09 04:12 PM

Bare with me, still learning:

Ist das nur ein Projekt oder ist es werde freigegeben werden.

Gute Arbeit übrigens



Is this just a project or going to be released?

Great work btw

Tomi_099 10-21-09 05:12 PM

Quote:

Originally Posted by ivank (Post 1192776)
Bare with me, still learning:

Ist das nur ein Projekt oder ist es werde freigegeben werden.

Gute Arbeit übrigens



Is this just a project or going to be released?

Great work btw

:salute::salute:

I think that we will only be in February or March 2010.
Important is it that the animation of the diesel correctly
Will be worked out.
So the money .. GAS and Diesel cycle.
I very much hope that I get support here.
Since the usual time will increase too much.
-------------------------------------------------------------------------

Ich denke das wir erst Feb oder März 2010 sein wird.
Bedeutend ist es , das die Animation der Diesel korrekt
Ausgearbeitet wird.
Also das Verhältnis ..GAS und Diesel Rhythmus.
Ich hoffe sehr dass ich hier Unterstützung bekomme.
Da das sonst zeitlich sich zu sehr ausweiten wird.


+++++++++++++++++++++++++++++++++
FOR @
NZsnowman


http://www.uboot995.homepage.t-onlin...lung_u995.html

http://www.uboot-netz.de/unetzforum/...milies/112.gif

++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++

Schultz 10-22-09 01:06 PM

If I am not mistaking the singn on the diesel engine is the the sign of producer in ww2 of tanks,gun and others Alfred Krupp? Am I right?

Tomi_099 10-22-09 08:09 PM

Quote:

Originally Posted by infernos (Post 1193134)
If I am not mistaking the singn on the diesel engine is the the sign of producer in ww2 of tanks,gun and others Alfred Krupp? Am I right?

--------------------------------------------------

:salute: YES SIR !!!

http://img7.imageshack.us/img7/4783/viic184.jpg

+++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++

Old diesel engine, ( Look by 3:30 )

YOU TUBE
http://www.youtube.com/watch?v=Eu-OL...response_watch

--------------------------------------

--------------------------------------------------------------------------------------------

urfisch 10-23-09 06:34 PM

Einfach nur GEIL!

:yeah:

Du hast das echt raus. Du solltest damit dein Geld verdienen. Gute 3D-Artisten sind wirklich rar...und werden viel gesucht!

walkirie 10-24-09 05:17 AM

Quote:

Originally Posted by urfisch (Post 1193750)


Du solltest damit dein Geld verdienen. Gute 3D-Artisten sind wirklich rar...und werden viel gesucht!

:yeah: I agree :yeah:

NZsnowman 10-26-09 05:40 PM

Hi Tomi

I was doing some research on my drawing today and was watching an old U-boat movie of U-boat in New York of U-552 around March 1942. They had a few shots from into the engine room and I noted the control box had two windows. U-552 was an early Type VIIC. So maybe all the control box had two windows and they change it from the drawing :hmmm:

Simon

Quote:

Originally Posted by Tomi_099 (Post 1192757)
After a small break I've taken the work again.
My wounds have not healed yet, but with small steps we continue again.

I have a question to the U-boat experts.
A slightly older variant of this diesel, not in Laboe (VIIc41)
is another variant has the control box.

Which has in Laboe (VIIc41) two small windows, and I suspect that the entire control box is also slightly larger.

The slightly older version I guess has only one window, and I suspect that the box
This also is somewhat smaller.
In this drawing, only one window is displayed (which is not visible here)
What you see is the control box of the variation in Laboe (VIIC41)
:hmmm:
I am looking for something pictures or drawings of the old version, or maybe there is another variation.

Pleas Help for your VIIC –Engine !!! :yeah:

----------------

Nach einer klein Pause habe ich die arbeit wieder aufgenommen.
Meine wunden sind noch nicht verheilt , aber mit kleinen schritten geht es wieder weiter.

Ich habe eine frage an die U-Boot Experten.
Eine etwas ältere Variante von diesen Diesel, also nicht die in Laboe (VIIc41 )
ist hat eine andere Variante von den Steuerungskasten.

Die in Laboe ( VIIc41 ) hat zwei kleine Fenster und ich vermute das der gesamte steuerungs- Kasten auch etwas größer ist.

Die etwas ältere Variante vermute ich hat nur ein Fenster und ich vermut das der Kasten
Dadurch auch etwas kleiner ist.
In dieser Zeichnung wird nur ein Fenster dargestellt ( was hier nicht zu sehen ist )
Was Sie sehen ist der Steuerungskasten der Variante in Laboe ( VIIC41 )

Ich suche um Bilder oder Zeichnungen der Alten Variante oder vielleicht gibt es noch eine andere Variation.


Tomi_099 10-27-09 09:27 PM

Quote:

Originally Posted by NZsnowman (Post 1194970)
Hi Tomi

I was doing some research on my drawing today and was watching an old U-boat movie of U-boat in New York of U-552 around March 1942. They had a few shots from into the engine room and I noted the control box had two windows. U-552 was an early Type VIIC. So maybe all the control box had two windows and they change it from the drawing :hmmm:

Simon

-------------------------

Pleas Help for your VIIC –Engine !!!:hmmm:

http://img101.imageshack.us/img101/6984/viic189.jpg


@walkirie \ @urfisch .....many...many..many....many...:hmmm: gute idee !!!

NZsnowman 10-28-09 04:28 AM

Hi Tomi

I also check all my pictures, books etc... and all the pictures I have of the control box, always has two windows :cry:

Simon

Tomi_099 10-28-09 05:07 AM

Quote:

Originally Posted by NZsnowman (Post 1195706)
Hi Tomi

I also check all my pictures, books etc... and all the pictures I have of the control box, always has two windows :cry:

Simon

-----------------



Some time ago I saw a picture ca.1939/40
With a one window.
But now when I need it I do not find it.

Thanks Simon!

NZsnowman 10-28-09 12:06 PM

Was maybe the boat (picture) of a Type VIIA or a VIIB? I have only looked at VIIC's. I will look a little farther back :)


All times are GMT -5. The time now is 10:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1995- 2024 Subsim®
"Subsim" is a registered trademark, all rights reserved.