Hydro bearing indicator disappeard

[OuNiS]

Sept 1943.
After "Detecting radar signals" message there is no sonar bearing indicator when H key pressed or in other words it is blank.

I Play GWX 3.0 Gold with couple of mods:

GWX - 16km Atmosphere=1
GWX - Indian Ocean Campaign Files Only=2
LifeBoats&Debris_v4=4
Waterstream+Exhaust Combi V2.3 for GWX3=5
sobers real smoke darker and a brown tint1.1=6
OLC's Modified Searchlight Beams for GWX3=7
M.E.P v3=8
HaloNotVisibleThroughBody=9
No continuous 'Ship spotted' V1.2 for GWX3=10
MEP v3 VisualSensors for gwx3=11
GWX 2 - No RING RING Mod by Melendir=12
Torpedo damage Final ver2.0=13
STzSinkingShipFix 2.0=14
GWX - Enhanced Damage Effects=15
Hitman Optics for GWX3 v.1=16


Any suggestions?

[Snestorm]

Perhaps a mod conflict.
This question is Jimbuna territory.
He's the smartest one I know on these issues.

[Gerald]

Sept 1943.
After "Detecting radar signals" message there is no sonar bearing indicator when H key pressed or in other words it is blank.

I Play GWX 3.0 Gold with couple of mods:

GWX - 16km Atmosphere=1
GWX - Indian Ocean Campaign Files Only=2
LifeBoats&Debris_v4=4
Waterstream+Exhaust Combi V2.3 for GWX3=5
sobers real smoke darker and a brown tint1.1=6
OLC's Modified Searchlight Beams for GWX3=7
M.E.P v3=8
HaloNotVisibleThroughBody=9
No continuous 'Ship spotted' V1.2 for GWX3=10
MEP v3 VisualSensors for gwx3=11
GWX 2 - No RING RING Mod by Melendir=12
Torpedo damage Final ver2.0=13
STzSinkingShipFix 2.0=14
GWX - Enhanced Damage Effects=15
Hitman Optics for GWX3 v.1=16


Any suggestions?
"RWR" signals,in most common situation,far beyond planes,warship from long distance,so i`ts not be at you have contact with bearing all the time..

[OuNiS]

"RWR" signals,in most common situation,far beyond planes,warship from long distance,so i`ts not be at you have contact with bearing all the time..

It's not exactly what I said.
Before first "Radar signal detected" message, hydro room is OK.
After that hydro bearing idicator is black. You can use it (mouse cursor changes to red and you can rotate indicator), but you couldn't see it.

[Jimbuna]

What are the two MEP mods?

[frau kaleun]

What are the two MEP mods?

An environment mod and the sensors mod that goes with it for a GWX install.

I'm pretty sure there's no need to have both the MEP mods and the GWX 16k atmo mod enabled at the same time, as MEP includes either a 16k or 20k atmosphere IIRC.

Don't know if that would cause the problem reported, but the GWX 16k can/should be disabled if MEP is enabled.

[OuNiS]

An environment mod and the sensors mod that goes with it for a GWX install.

I'm pretty sure there's no need to have both the MEP mods and the GWX 16k atmo mod enabled at the same time, as MEP includes either a 16k or 20k atmosphere IIRC.

Don't know if that would cause the problem reported, but the GWX 16k can/should be disabled if MEP is enabled.

Thanks for answer. I'll check it.

[Snestorm]

An environment mod and the sensors mod that goes with it for a GWX install.

I'm pretty sure there's no need to have both the MEP mods and the GWX 16k atmo mod enabled at the same time, as MEP includes either a 16k or 20k atmosphere IIRC.

Don't know if that would cause the problem reported, but the GWX 16k can/should be disabled if MEP is enabled.

You are going to join Jimbuna on my Smart People To Seek Out SH3 Answers From list.

[frau kaleun]

Thanks for answer. I'll check it.

Don't know if it will help solve your problem but at any rate I don't think you need both mods enabled. But I do wonder if the Sensors mod that goes with MEP conflicts somehow with whatever's in the GWX 16k mod.

It's worth a try, anyway.

[Jimbuna]

An environment mod and the sensors mod that goes with it for a GWX install.

I'm pretty sure there's no need to have both the MEP mods and the GWX 16k atmo mod enabled at the same time, as MEP includes either a 16k or 20k atmosphere IIRC.

Don't know if that would cause the problem reported, but the GWX 16k can/should be disabled if MEP is enabled.

I'm not aware of what the MEP consists of but if it's sensor-related it's a good bet that therein lies the problem.

[OuNiS]

I checked it.

Reason: changing AA settings by pressing Shift+PgUp keys in a boat equiped with Radar Warning.

If your boat has Radar Warning system then when you increase AA by pressing Shift+PgUp Hydro bearing indicator will become blank. If you set AA to defualt value everything will back to normal.
If your boat doesn't have RW nothing happed!

I observe this after few hours of testing.

Thanks everybody for suggestions!

[frau kaleun]

I checked it.

Reason: changing AA settings by pressing Shift+PgUp keys in a boat equiped with Radar Warning.

If your boat has Radar Warning system then when you increase AA by pressing Shift+PgUp Hydro bearing indicator will become blank. If you set AA to defualt value everything will back to normal.
If your boat doesn't have RW nothing happed!

I observe this after few hours of testing.

Thanks everybody for suggestions!

Glad you got it figured out! :yeah:

[Jimbuna]

Good find/fix matey http://www.psionguild.org/forums/images/smilies/wolfsmilies/thumbsup.gif