Impatient GWX noob has RTFM question

[Sgian Dubh]

Hi all,

THis is probably in the manual, which I am still making my way through, but I just couldn't wait to try out Gibratar in GWX (quite an experience - and lots of Damage control practice - :D)

The only thing that I had a problem with was diving. (this was before I had taken any damage)

I can use the standard commands just fine, but when I would issue a command for a new depth on the depth meter, I would hear the command repeated by the COB, but then the command would not be executed. For instance, I am at periscope depth and I issue a command for 120 meters. I hear the COB repeat 120 meters, but then we stayed at PD. I was moving forward at 3 knts, so there should have been sufficeint flow over the control surfaces to accomplish this, albeit slowly. I let it run for a good 15 minuties and we hadn't even started to move to the lower depth.

Yet I have started a campaign where I haven't noticed this - but then I can't say for certain that I have done anything but go to a 'pre-set' depth by keyboard in the campaign as I am still transiting to the North Sea.

If someone just wants to say RTFM pp.xx-xx, that's fine. I just want to get in-sim as fast as possible.

Thanks in advance.

[Jimbuna]

RTFM!!! j/k :up:

Try hitting 'D' for dive (if that works keep an eye on your depth) or 'C' for crash dive (should dive to 60/70 metres) and see if those functions are working :arrgh!:

[danlisa]

Is this evident at other speeds?

I can usually change depth (very slowly) @ 2kts.

Try pressing D (dive) and see if you gain depth.

It's worth bringing this up for the Dev's to see.:yep:

[AVGWarhawk]

Press the C key!!! J/K!!! What boat are you commanding? I know my IXB at 3 kts for a dive is slow. It will slow to 2kts and almost seen she is not going anywhere. If the DD know I'm about and have a pretty good fix on me, I hit flank for the bottom! What the heck, I make noise but I'm getting to safe haven quickly:up:

[NipplesTheCat]

15 minutes is a hell of a dive time even for a IXD2. Something is very wrong here.

[Albrecht Von Hesse]

Is this evident at other speeds?

I can usually change depth (very slowly) @ 2kts.

Try pressing D (dive) and see if you gain depth.

It's worth bringing this up for the Dev's to see.:yep:

I've noticed that, with planes set to dive, at: 1kt I definitely start rising; 2kts I gradually will rise; 3 kts I hold depth or very gradually start going deeper. It's only at 4 kts or faster that I noticably dive.

[Sgian Dubh]

I'll try some tests as soon as I get home and get the sim fired up

[irish1958]

There are some tests going on about the positive buoyancy as we speak.

[Jimbuna]

I've noticed that, with planes set to dive, at: 1kt I definitely start rising; 2kts I gradually will rise; 3 kts I hold depth or very gradually start going deeper. It's only at 4 kts or faster that I noticably dive.

As far as I am aware this is exactly how the mod intended to make the boat behave Albrecht :yep: