SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > Silent Hunter 4: Wolves of the Pacific > SH4 ATO Mods
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 04-30-17, 09:57 PM   #1
modelrrfan51
Watch
 
Join Date: Feb 2016
Location: New Orleans Louisiana
Posts: 22
Downloads: 2
Uploads: 0
Icon9 Manual torpedo attack

Started trying manual torpedo mode. Here is my questions: Started practicing with Sub School using the torpedo attack. Target is moving from left to right. Speed is 7 knots, set TDC to seven, enter into computer, next set AOB, now is where its becomes interesting. Angle to target track is 90 degrees, and want to shoot 15 degrees before 90 degrees. So set AOB to 75 degrees (90-15), yet when check the attack map the torpedo track is 16 degrees on the other side of 90 degrees. When set the AOB the top dial moves, yet the torpedo gyro stays the same, at 16 degrees. No matter where I set the AOB, the gryo angle is always 16 degrees. So finally to get hits had to adjust the spread dial to 4 left. So question would what makes the gyro move, or do I have a glitch in this program. This is a brand new Gold Edition of SH4. This is version 1.4 Any ideas?
modelrrfan51 is offline   Reply With Quote
Old 04-30-17, 11:27 PM   #2
Reece
CINC Pacific Fleet
 
Reece's Avatar
 
Join Date: Sep 2003
Location: Down Under
Posts: 32,563
Downloads: 171
Uploads: 0
Default

I couldn't be bothered working out the AOB so I just went with the 'quick 90' approach!!
__________________

Sub captains go down with their ship!
Reece is offline   Reply With Quote
Old 05-01-17, 12:31 AM   #3
Sailor Steve
Eternal Patrol
 
Sailor Steve's Avatar
 
Join Date: Nov 2002
Location: High in the mountains of Utah
Posts: 50,369
Downloads: 745
Uploads: 249


Default

You'll likely get a better response if you post this in the SH4 forum.
__________________
“Never do anything you can't take back.”
—Rocky Russo
Sailor Steve is offline   Reply With Quote
Old 05-01-17, 06:09 AM   #4
Jimbuna
Chief of the Boat
 
Jimbuna's Avatar
 
Join Date: Feb 2006
Location: 250 metres below the surface
Posts: 180,290
Downloads: 63
Uploads: 13


Default

Agreed and moved.
__________________
Wise men speak because they have something to say; Fools because they have to say something.
Oh my God, not again!!


GWX3.0 Download Page - Donation/instant access to GWX (Help SubSim)
Jimbuna is online   Reply With Quote
Old 05-01-17, 08:03 AM   #5
Rockin Robbins
Navy Seal
 
Join Date: Mar 2007
Location: DeLand, FL
Posts: 8,899
Downloads: 135
Uploads: 52


Default

Hey there! Okay, you don't have enough information there to definitively help you but I can go through the whole thing.

There are two kinds of attacks you can manage here, the check bearing (conventional US attack method) and the constant bearing attack (ala U-boat, but we don't talk about U-boats in this context, we talk about Dick O'Kane, who "invented" them)

Your check bearing or conventional attack works using the position keeper. The position keeper uses a clock, hooked to your supplied enemy position, course and speed to predict his position at all times after you give the TDC the information. If your data is correct (capitalize, underline, bold and italicize the word "if.") you can shoot at any time and hit the enemy. You could even dive to 99 feet, change your course and speed, shoot and blub, blub, blub.

To do this conventional (for US boats) attack, first turn on your position keeper. Then determine and enter the target speed. Next enter the AoB, which is your bearing in German nomenclature from the target. Quickly take a stadimeter sight, setting the enemy's position (range and bearing). Now check with your attack map to ensure that the enemy's position and the TDC position are the same and moving together at the same course and speed. If that checks out you're ready to go. Just wait until the target is at the position you want to shoot from and send him your greetings.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxx

The second attack method is the constant bearing method. Typically, this would be done from a course 90 degrees from the target track and with fleet boats we call this the Dick O'Kane technique. Range doesn't matter much but the game TDC freaks out if your range shows zero.

In this case you pick a shoot bearing. We'll use your example, with the ship coming left to right, 7 knots. First you determine target speed and enter that into the TDC. Ensure the position keeper is OFF! Then pick your shoot bearing, 15 degrees before straight ahead in your case, and enter your AoB as 90-15 or 75 degrees starboard, because you're looking at the starboard side of the target. Get this wrong and bad stuff happens. Finally, just grab the range dial and rotate it as far as you can in a positive direcction (comes about to 1400 yards), then sight the periscope down the 360-15=345 bearing and hit send to TDC. You're set.

Now all you have to do is sight the periscope down the 345 and shoot when the parts of the target you want to hit cross the wire.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxx

Pay very close attention to starboard or port AoB. Pay very close attention to whether the position keeper is on or off. Always use the attack map to check your solution, not the numbers on the TDC. Graphics are self-validating, numbers are just numbers. There are other pointers in the video.

Rockin Robbins is offline   Reply With Quote
Old 05-01-17, 05:59 PM   #6
Sniper297
The Old Man
 
Join Date: Dec 2005
Location: Philadelphia Shipyard Brig
Posts: 1,386
Downloads: 160
Uploads: 19
Default

For the kind of basic manual shooting you're doing, you need to center the crosshairs on the target with the stadimeter on, then click the "send range and bearing to TDC" in order to update the gyro angle. I wouldn't advise using the position keeper at all when you're learning, because the primary purpose of that is to keep track of where the target MIGHT be assuming he hasn't changed speed or course since the last periscope observation.

Second item, make sure you cycle through all the tubes you intend to fire and hit the Q key to open the outer doors BEFORE you get to the "final bearing and shoot" stage. In the stock game the tubes will open automatically when you fire if you forget to open them before - but that takes a few seconds, so by the time the torpedo actually leaves the tube the gyro angle is ancient history and will nearly always miss behind.
Sniper297 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:32 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1995- 2024 Subsim®
"Subsim" is a registered trademark, all rights reserved.