MMM - MyMegaMod - Page 49

PrEZeX · 03-29-12, 08:09 PM

I still can't solve my problem.

Can anyone give me some ideas how to solve it? I realy like MMM and want to keep all those nice mods...

eRe4s3r · 03-30-12, 06:01 AM

Mhhh.. i have a similar but not the same issue as malkuth74 using the All in One mod on a clean SH5 install, with 4gb patch.

So basically, I just started a new campaign right from the start and it asked me whether to skip the introduction. I clicked *yes* and the Introduction mission started anyway. well......

Secondly, after getting back to Kiel everything goes smooth, until I hit END patrol. At which point

1) the save created is corrupted, ctd's when trying to load
2) the game crashes to desktop with a "This application needs to close"

---

The second problem is, when creating an entirely new captain profile it doesn't even ask me to skip that mission anymore. And ctd's right when the first tanker explodes.

So someone down there in the depths CERTAINLY does not want me to play SH5 with this mod.

I am really at a loss here

pedrobas · 03-30-12, 07:56 AM

Follow this instructions:

Quote:

Originally Posted by pedrobas

SOME IMPORTANT NOTES for install this: YOU HAVE TO BE PATCHED TO v1.2 OF THE GAME!!!

8- Start a "New Carrier", skip the tutorial. Notice that the first time you load the bunker, no options for equipment are available, you have to save game and load it again to make it work, the sub then appears from underwater and you can proceed. If it works ok exit game, load p1+p2 and do the same. If ok oad p1+p2+p3 and so on. After enable p5 you have to know what is said in the OHII thread: http://www.subsim.com/radioroom/showthread.php?t=189818

IMPORTANT NOTES (from OHII thread)

Starting New Career
Just click "New Campaign" - enter your name and select the first campaign "Baltic Operations". Skip the tutorial.

When starting a new campaign using OHII - DO NOT PLAY THE TUTORIAL - you will get a ctd when returing to Kiel at the end of the tut. Select "Skip Tutorial" when starting.
If you are not getting an option to skip the tutorial when starting a new career, go to Documents\SH5\data\cfg\CareerHistory.cfg and edit the file with Notepad. Change the following line:

HasCompletedTutorial=false
with
HasCompletedTutorial=true

pedrobas · 03-30-12, 07:59 AM

Quote:

Originally Posted by sober

Perhaps this is more clear

PrEZeX · 03-30-12, 08:33 AM

I made a debug log when the game crashes, don't know if it helps...

eRe4s3r · 03-30-12, 08:37 AM

That did it thank you so much ^^... but so that i don't appear a complete noob, i read that, and clicked skip tutorial and it did not skip the tutorial (which confused me a lot).. but for some reason after I deleted the whole sh5 folder in Documents and created an entirely new profile and editing the line without actually playing the tutorial it works just fine.

So long story short, i probably should have read that whole first post ;P

pedrobas · 03-30-12, 08:39 AM

Quote:

Originally Posted by eRe4s3r

That did it thank you so much ^^... but so that i don't appear a complete noob, i read that, and clicked skip tutorial and it did not skip the tutorial (which confused me a lot).. but for some reason after I deleted the whole sh5 folder in Documents and created an entirely new profile and editing the line without actually playing the tutorial it works just fine.

So long story short, i probably should have read that whole first post ;P

No problem, we are here to help. Glad it works.

pedrobas · 03-30-12, 09:24 AM

Quote:

Originally Posted by PrEZeX

I made a debug log when the game crashes, don't know if it helps...

What video card do you have?

PrEZeX · 03-30-12, 09:39 AM

Hi Pedrobas,
My specs are:
Windows Ultimate 7 (x64)
Intel I7 960 @3.71 Ghz
12 GB DDR3 ram
4 OCZ Vertex III SSD disks (2 in raid1 for OS, 1 for games and 1 for pagefile)
HD6990
Asus Xonar DX soundcard
No problems with heat or PSU (1kW)

pedrobas · 03-30-12, 09:53 AM

Quote:

Originally Posted by PrEZeX

Hi Pedrobas,
My specs are:
Windows Ultimate 7 (x64)
Intel I7 960 @3.71 Ghz
12 GB DDR3 ram
4 OCZ Vertex III SSD disks (2 in raid1 for OS, 1 for games and 1 for pagefile)
HD6990
Asus Xonar DX soundcard
No problems with heat or PSU (1kW)

But i don´t understand well. Do you have lag or pauses or you have CTDs. With explosions or what?

PrEZeX · 03-30-12, 10:12 AM

When the ships are destroyed i get pause/lag. Sometimes I get freezing/lag and sometimes the game just crashes (the log is from when the came crashed) and it is always when the ships are destroyed. The most crashed I get so far is in the Lifeboat test mission.

I've also noticed one thing while playing... When i right click the mouse to look around and right click again to go back to my cursor I can't sometimes do this and I must click several times to leave the "view" mode (sometimes left and right clicking helps, sometimes not). Also when I get this lag when the ships explode and I'm using mouse to turn the periscope the mouse view "unclicks" itself and goes back to the cursor mode.

pedrobas · 03-30-12, 10:23 AM

Quote:

Originally Posted by PrEZeX

When the ships are destroyed i get pause/lag. Sometimes I get freezing/lag and sometimes the game just crashes (the log is from when the came crashed) and it is always when the ships are destroyed. The most crashed I get so far is in the Lifeboat test mission.

I've also noticed one thing while playing... When i right click the mouse to look around and right click again to go back to my cursor I can't sometimes do this and I must click several times to leave the "view" mode (sometimes left and right clicking helps, sometimes not). Also when I get this lag when the ships explode and I'm using mouse to turn the periscope the mouse view "unclicks" itself and goes back to the cursor mode.

To check if it´s FX Update causing this you can download MMM in parts and don´t use p2 (is the one with FX).

PrEZeX · 03-30-12, 12:32 PM

Thanks Pedrobas, I'm working night shifts now so I'm not at home but I will check it out when I get home tomorrow. I just don't understand how so many people don't have any problems with MMM and it won't work on my rig. I thought that with my specs the game would run fine with MMM.

pedrobas · 03-30-12, 12:42 PM

Quote:

Originally Posted by PrEZeX

Thanks Pedrobas, I'm working night shifts now so I'm not at home but I will check it out when I get home tomorrow. I just don't understand how so many people don't have any problems with MMM and it won't work on my rig. I thought that with my specs the game would run fine with MMM.

I´ve been thinking and it could be your Video card settings, AA, anisotropic, etc..., are you using catalyst CCC for setup the card?

PrEZeX · 03-30-12, 12:57 PM

Yes, and i have all settings on default. I tried also to disable Catalyst AI but it didn't help...

Do you also have ATI Pedrobas?

View Poll Results: How would you prefer?
All in a single mod (only 1 Big Mod)	42	52.50%
Just the way it is (in parts)	38	47.50%
Voters: 80. You may not vote on this poll

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-29-12, 08:09 PM	#721
PrEZeX Helmsman Join Date: Mar 2012 Location: Stockholm, Sweden Posts: 108 Downloads: 98 Uploads: 0	I still can't solve my problem. Can anyone give me some ideas how to solve it? I realy like MMM and want to keep all those nice mods...

03-30-12, 06:01 AM	#722
eRe4s3r Swabbie Join Date: Jul 2007 Posts: 7 Downloads: 23 Uploads: 0	Mhhh.. i have a similar but not the same issue as malkuth74 using the All in One mod on a clean SH5 install, with 4gb patch. So basically, I just started a new campaign right from the start and it asked me whether to skip the introduction. I clicked yes and the Introduction mission started anyway. well...... Secondly, after getting back to Kiel everything goes smooth, until I hit END patrol. At which point 1) the save created is corrupted, ctd's when trying to load 2) the game crashes to desktop with a "This application needs to close" --- The second problem is, when creating an entirely new captain profile it doesn't even ask me to skip that mission anymore. And ctd's right when the first tanker explodes. So someone down there in the depths CERTAINLY does not want me to play SH5 with this mod. I am really at a loss here

03-30-12, 08:33 AM	#725
PrEZeX Helmsman Join Date: Mar 2012 Location: Stockholm, Sweden Posts: 108 Downloads: 98 Uploads: 0	I made a debug log when the game crashes, don't know if it helps...

03-30-12, 08:37 AM	#726
eRe4s3r Swabbie Join Date: Jul 2007 Posts: 7 Downloads: 23 Uploads: 0	That did it thank you so much ^^... but so that i don't appear a complete noob, i read that, and clicked skip tutorial and it did not skip the tutorial (which confused me a lot).. but for some reason after I deleted the whole sh5 folder in Documents and created an entirely new profile and editing the line without actually playing the tutorial it works just fine. So long story short, i probably should have read that whole first post ;P

03-30-12, 09:39 AM	#729
PrEZeX Helmsman Join Date: Mar 2012 Location: Stockholm, Sweden Posts: 108 Downloads: 98 Uploads: 0	Hi Pedrobas, My specs are: Windows Ultimate 7 (x64) Intel I7 960 @3.71 Ghz 12 GB DDR3 ram 4 OCZ Vertex III SSD disks (2 in raid1 for OS, 1 for games and 1 for pagefile) HD6990 Asus Xonar DX soundcard No problems with heat or PSU (1kW)

03-30-12, 10:12 AM	#731
PrEZeX Helmsman Join Date: Mar 2012 Location: Stockholm, Sweden Posts: 108 Downloads: 98 Uploads: 0	When the ships are destroyed i get pause/lag. Sometimes I get freezing/lag and sometimes the game just crashes (the log is from when the came crashed) and it is always when the ships are destroyed. The most crashed I get so far is in the Lifeboat test mission. I've also noticed one thing while playing... When i right click the mouse to look around and right click again to go back to my cursor I can't sometimes do this and I must click several times to leave the "view" mode (sometimes left and right clicking helps, sometimes not). Also when I get this lag when the ships explode and I'm using mouse to turn the periscope the mouse view "unclicks" itself and goes back to the cursor mode.

03-30-12, 12:32 PM	#733
PrEZeX Helmsman Join Date: Mar 2012 Location: Stockholm, Sweden Posts: 108 Downloads: 98 Uploads: 0	Thanks Pedrobas, I'm working night shifts now so I'm not at home but I will check it out when I get home tomorrow. I just don't understand how so many people don't have any problems with MMM and it won't work on my rig. I thought that with my specs the game would run fine with MMM.

03-30-12, 12:57 PM	#735
PrEZeX Helmsman Join Date: Mar 2012 Location: Stockholm, Sweden Posts: 108 Downloads: 98 Uploads: 0	Yes, and i have all settings on default. I tried also to disable Catalyst AI but it didn't help... Do you also have ATI Pedrobas?