SH3 campaign crash

DoctorWho4 · 08-05-18, 10:52 PM

Hello all,

Like others I am having a ctd when trying to play a campaign. I start a new campaign and it loads to about 30% and then I get the ctd. I can play the training and single missions no problem. This happens with stock SH3 and with GWX. I have done a lot of googling and no luck so far. Thought maybe steam was the issue...or win 10...or a graphics issue...but haven't been able to nail it down. Any ideas? Thanks.

Doc

Aktungbby · 08-06-18, 12:29 AM

DoctorWho4!

blackswan40 · 08-06-18, 12:47 AM

Hi Doctorwho4

check this out

http://www.subsim.com/radioroom/showthread.php?t=219068

Link below has instructions how to get your Steam Version of SH3 Working

http://www.mediafire.com/file/q0wao7...structions.zip

If you can't read the text hold down control key while turning mouse wheel forward increases text size

hope this helps you some

DoctorWho4 · 08-06-18, 06:13 PM

Quote:

Originally Posted by blackswan40

Hi Doctorwho4

check this out

http://www.subsim.com/radioroom/showthread.php?t=219068

Link below has instructions how to get your Steam Version of SH3 Working

http://www.mediafire.com/file/q0wao7...structions.zip

If you can't read the text hold down control key while turning mouse wheel forward increases text size

hope this helps you some

Thanks for the reply. I have tried moving the directory and the suggestions about the nvidia card settings. Tutorial and Single Missions still work ok but the campaign gets to about 30% still and ctd. I wonder if I tried using LSH mod pack if that would make a difference??

Doc

CTU_Clay · 08-06-18, 07:17 PM

Welcome to SubSim DoctorWho4!

blackswan40 · 08-07-18, 03:14 AM

Hi Doctorwho4 when you downloaded the steam version of SH3 did you move it to C:\Games\SilentHunterIII and then run SH3 in a single mission this makes a SH3 Folder in your Documents for all your Campaign Patrol Saves
So when SH3 Stock works in single player move on to the single player Campaign
with just SH3 no Commander Mod and no Gwx if SH3 stock campaign works then we move on to GWX3

GWX3 Install in windows 10

this is how I did it for my SH3 GWX3 Campaign install
made a copy of my stock SH3 install then I pasted that SH3 Folder into another folder called WOLFPACK in my documents then copied & pasted all the GWX3 7 binfiles & the GWX3 exe file that I downloaded earlier and the 4gig patch for GWX3 launched the GWX exe it installed no Problems then enabled the 4gig patch then installed the jsgme mod enabler activated the mods I wanted to use
then I run GWX3 and tested a single player mission all worked ticks another box

now setting up the Commander mod 3.2 for GWX3
I installed to another folder in my Documents called WOLFPACK HQ I tried installing the commander mod in the default installation path C:/programe filesx86 didn't like it so put it in a new folder in documents called Wolfpack HQ then I placed the GWX3 Commander mod config file into my SilenthunterIII GWX3 Folder where my SH3 GWX install is located and ran it so it would allow the commander mod to talk to my SilenthunterIII GWX3 install it asks you where you your GWX3 Silent HunterIII is installed C:/Users/User/Documents/WOLFPACK
so all done i launched the Commander Mod fired up no problems picked my Uboat commander wave height seasonal days spent in port yada yada
then launched SH3 via Commander mod there i was in the SH3 uboat office picked my crew launched SH3 game fired up uboat docked at the dockside band playing all systems mormal jobs a gudun

Doctorwho4 please let me know how you get on and also what are your PC Specs

THEBERBSTER · 08-07-18, 04:28 AM

A Warm Welcome To The Subsim Community > DoctorWho4
Subsim <> Make A Donation <> See The Benefits <> Support The Community
SH3 – 4 - 5 Tutorials And Other Information Links In My Signature Below

Post #6 Running Applications As An Administrator > Pictorial > Missing pictures replaced

Post #7 Changing Nvidia And AMD Radeon GPU Settings > Pictorial > Missing pictures replaced

Post #65 Having A Problem With Silent Hunter 3 > Check This Post Out

Post #61 Changing Windows 10 To Run In A Compatibility Mode > Pictorial

DoctorWho4 · 08-09-18, 09:07 PM

Unfortunately I have had no luck so I did a refund on steam. I ordered a physical copy off of Amazon so I am hoping to have more luck with that one. Hopefully lol.

08-05-18, 10:52 PM	#1
DoctorWho4 Swabbie Join Date: Aug 2018 Posts: 12 Downloads: 9 Uploads: 0	SH3 campaign crash Hello all, Like others I am having a ctd when trying to play a campaign. I start a new campaign and it loads to about 30% and then I get the ctd. I can play the training and single missions no problem. This happens with stock SH3 and with GWX. I have done a lot of googling and no luck so far. Thought maybe steam was the issue...or win 10...or a graphics issue...but haven't been able to nail it down. Any ideas? Thanks. Doc

08-06-18, 12:29 AM	#2
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 27,843 Downloads: 22 Uploads: 0	welcome aboard! DoctorWho4! __________________ "Only two things are infinite; The Universe and human squirrelyness; and I'm not too sure about the Universe"

08-06-18, 12:47 AM	#3
blackswan40 LSH-2022 Liaison Officer Join Date: Mar 2008 Location: IN THE STEEL SHARKS VIRTUAL OCEAN Posts: 2,478 Downloads: 589 Uploads: 30	Hi Doctorwho4 check this out http://www.subsim.com/radioroom/showthread.php?t=219068 Link below has instructions how to get your Steam Version of SH3 Working http://www.mediafire.com/file/q0wao7...structions.zip If you can't read the text hold down control key while turning mouse wheel forward increases text size hope this helps you some Last edited by blackswan40; 08-06-18 at 01:19 AM.

08-06-18, 07:17 PM	#5
CTU_Clay The Lone Wolf Join Date: May 2006 Location: Bellville, TX 77418 Posts: 710 Downloads: 314 Uploads: 0	Welcome to SubSim DoctorWho4! __________________ "The Lone Wolf"] https://steelsharksforum.proboards.com/ *“Keep your eyes on the stars, and your feet on the ground.” .*

08-07-18, 03:14 AM	#6
blackswan40 LSH-2022 Liaison Officer Join Date: Mar 2008 Location: IN THE STEEL SHARKS VIRTUAL OCEAN Posts: 2,478 Downloads: 589 Uploads: 30	Hi Doctorwho4 when you downloaded the steam version of SH3 did you move it to C:\Games\SilentHunterIII and then run SH3 in a single mission this makes a SH3 Folder in your Documents for all your Campaign Patrol Saves So when SH3 Stock works in single player move on to the single player Campaign with just SH3 no Commander Mod and no Gwx if SH3 stock campaign works then we move on to GWX3 GWX3 Install in windows 10 this is how I did it for my SH3 GWX3 Campaign install made a copy of my stock SH3 install then I pasted that SH3 Folder into another folder called WOLFPACK in my documents then copied & pasted all the GWX3 7 binfiles & the GWX3 exe file that I downloaded earlier and the 4gig patch for GWX3 launched the GWX exe it installed no Problems then enabled the 4gig patch then installed the jsgme mod enabler activated the mods I wanted to use then I run GWX3 and tested a single player mission all worked ticks another box now setting up the Commander mod 3.2 for GWX3 I installed to another folder in my Documents called WOLFPACK HQ I tried installing the commander mod in the default installation path C:/programe filesx86 didn't like it so put it in a new folder in documents called Wolfpack HQ then I placed the GWX3 Commander mod config file into my SilenthunterIII GWX3 Folder where my SH3 GWX install is located and ran it so it would allow the commander mod to talk to my SilenthunterIII GWX3 install it asks you where you your GWX3 Silent HunterIII is installed C:/Users/User/Documents/WOLFPACK so all done i launched the Commander Mod fired up no problems picked my Uboat commander wave height seasonal days spent in port yada yada then launched SH3 via Commander mod there i was in the SH3 uboat office picked my crew launched SH3 game fired up uboat docked at the dockside band playing all systems mormal jobs a gudun Doctorwho4 please let me know how you get on and also what are your PC Specs Last edited by blackswan40; 08-07-18 at 03:46 AM.

08-07-18, 04:28 AM	#7
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Dibden Purlieu - Southampton Posts: 9,605 Downloads: 1123 Uploads: 0	A Warm Welcome To The Subsim Community > DoctorWho4 Subsim <> Make A Donation <> See The Benefits <> Support The Community SH3 – 4 - 5 Tutorials And Other Information Links In My Signature Below Post #6 Running Applications As An Administrator > Pictorial > Missing pictures replaced Post #7 Changing Nvidia And AMD Radeon GPU Settings > Pictorial > Missing pictures replaced Post #65 Having A Problem With Silent Hunter 3 > Check This Post Out Post #61 Changing Windows 10 To Run In A Compatibility Mode > Pictorial __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

08-09-18, 09:07 PM	#8
DoctorWho4 Swabbie Join Date: Aug 2018 Posts: 12 Downloads: 9 Uploads: 0	Unfortunately I have had no luck so I did a refund on steam. I ordered a physical copy off of Amazon so I am hoping to have more luck with that one. Hopefully lol.