Can't dive cause of what?!?

Spidergecko · 05-17-19, 04:37 PM

Hello Sailors.

I have a big Problem with the Wolves of Steel Mod.
If i will make the RAOBF-Training, everything with my Submarine is fine.
Diving without problems.

But if i start a new campaign, i leave Memel Harbour with Autopilot.
Now everytime i try to dive, the stern of the ship is hanging through.
The consequence is, that if i am diving in sight tube depth, my ship's bow looking out of the Water.

Is it my fault? Or is it a bug? I tried to regulate the rudders, but it doesnt help. If i stay still, the ship can dive to 150m. But as soon as i start my engines to 2-3 knots, the ship always pop up. If i am on speed, the ship only dives 25m, not deeper.
It seems like it has to much weight at the stern and too much air in the bow

I didn't find anything at google or at forum search. Maybe someone can help me :-/

PS: I already started a new campaign but its the same error. But in Training Mode (RAOBF-Training) everything is normal?!

I've seen that my boat is trying to stabilize oneself, but it wont work. Bow of my ship dancing down, and up, and down, and up and i always hear that sound of pressing air in the water ballast tank, even though im standing still with 0 knots and i am 10m deep :-(

XenonSurf · 05-17-19, 05:37 PM

I think it can have to do with manual command of dive planes. When you are finished commanding them manually, reput them in auto mode.

That's just an idea, I don't know if it's because of that. Do you use any external mods? You should not with WoS.

Spidergecko · 05-18-19, 03:39 AM

Hello :-)

Dive Planes standing on Auto. I just tried to change to manual cause of that error. But it doesnt have any effect :-(

I only have the TWOS Addon newest Version installed. Nothing else :-/

I wonder cause in Training Mode (RAOBF PRACTICE) everything works fine :-/

vdr1981 · 05-18-19, 03:44 AM

JSGME screenshot? What TWoS addon?

THEBERBSTER · 05-18-19, 04:11 AM

A Warm Welcome To The Subsim Community > Spidergecko
Subsim <> Make A Donation <> See The Benefits <> Support The Community
SH3 – 4 - 5 Tutorials > Downloads > Other Useful Information > See Links in My Signature Below

Aktungbby · 05-18-19, 09:48 AM

Spidergecko!

Spidergecko · 05-18-19, 12:33 PM

Here is my JSGME Screenshot. I only had activated the environment 15 and the german Language-Patch. But with all deactivated i have the same bug.

If i am running at 11-12 knots, i can dive fine, but as the ship deactivate the diesel-engines and i running slower (6-7 knots) the bow of my ship starting to going up!
And even if i am diving at snorkel depth the full command bridge looks out of the water -.-

I wonder the bug doesn't exist at Practice-Mode in historical campaigns ..
There everything goes fine.
I have all realism activated, except the external Cam View...but i think that isn't the reason?!

Im driving at 12 knots, diving to snorkel deepth, if i am under water, changing to e-engines, boat slows down to 7 knots and dives up, till diesel engines activating. Then it dives again, till the e-engines starting and so it goes on and on ...

Hmm...this it how it looks if i stay still at 0 knots and diving manually to 20 meters. The ship is staying this way under water.

vdr1981 · 05-18-19, 01:19 PM

Quote:

Originally Posted by Spidergecko

I only had activated the environment 15 and the german Language-Patch. But with all deactivated i have the same bug.

I really don't think so. ENV 15 is not compatible with TWoS regardless of what it's author says and that is your problem...

Spidergecko · 05-18-19, 02:12 PM

Euhh...i think you're right. I deinstalled the game and reinstalled it includes the TWOS addon and without the environment 15 everything works fine now!

Wow thank you very much for your help :-)

Sjizzle · 05-18-19, 03:50 PM

Quote:

Originally Posted by Spidergecko

Euhh...i think you're right. I deinstalled the game and reinstalled it includes the TWOS addon and without the environment 15 everything works fine now!

Wow thank you very much for your help :-)

no offence but if u have read the documentation u could avoid this useless install and unistall...

Sledgehammer427 · 05-24-19, 10:52 AM

Quote:

Originally Posted by Sjizzle

no offence but if u have read the documentation u could avoid this useless install and unistall...

The roads to the same destination can be longer for others. Let's just be happy he got his game working

05-17-19, 04:37 PM	#1
Spidergecko Swabbie Join Date: Sep 2014 Posts: 5 Downloads: 31 Uploads: 0	Can't dive cause of what?!? Hello Sailors. I have a big Problem with the Wolves of Steel Mod. If i will make the RAOBF-Training, everything with my Submarine is fine. Diving without problems. But if i start a new campaign, i leave Memel Harbour with Autopilot. Now everytime i try to dive, the stern of the ship is hanging through. The consequence is, that if i am diving in sight tube depth, my ship's bow looking out of the Water. Is it my fault? Or is it a bug? I tried to regulate the rudders, but it doesnt help. If i stay still, the ship can dive to 150m. But as soon as i start my engines to 2-3 knots, the ship always pop up. If i am on speed, the ship only dives 25m, not deeper. It seems like it has to much weight at the stern and too much air in the bow I didn't find anything at google or at forum search. Maybe someone can help me :-/ PS: I already started a new campaign but its the same error. But in Training Mode (RAOBF-Training) everything is normal?! I've seen that my boat is trying to stabilize oneself, but it wont work. Bow of my ship dancing down, and up, and down, and up and i always hear that sound of pressing air in the water ballast tank, even though im standing still with 0 knots and i am 10m deep :-( Last edited by Spidergecko; 05-17-19 at 04:49 PM.

05-18-19, 03:44 AM	#4
vdr1981 Navy Seal Join Date: May 2010 Location: Србија Posts: 6,078 Downloads: 581 Uploads: 13	JSGME screenshot? What TWoS addon? __________________ Best regards... Vecko The Wolves of Steel v2.2.25_SH5 Expansion Pack_Full The Wolves of Steel v2.2.xx to v2.2.25 - Update PDF Install Instructions How to report an issue If You wish to support my work... Last edited by vdr1981; 05-18-19 at 04:05 AM.

05-18-19, 04:11 AM	#5
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Dibden Purlieu - Southampton Posts: 9,605 Downloads: 1123 Uploads: 0	A Warm Welcome To The Subsim Community > Spidergecko Subsim <> Make A Donation <> See The Benefits <> Support The Community SH3 – 4 - 5 Tutorials > Downloads > Other Useful Information > See Links in My Signature Below __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

05-18-19, 09:48 AM	#6
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 27,814 Downloads: 22 Uploads: 0	welcome back! Spidergecko! __________________ "Only two things are infinite; The Universe and human squirrelyness; and I'm not too sure about the Universe"

05-18-19, 12:33 PM	#7
Spidergecko Swabbie Join Date: Sep 2014 Posts: 5 Downloads: 31 Uploads: 0	Here is my JSGME Screenshot. I only had activated the environment 15 and the german Language-Patch. But with all deactivated i have the same bug. If i am running at 11-12 knots, i can dive fine, but as the ship deactivate the diesel-engines and i running slower (6-7 knots) the bow of my ship starting to going up! And even if i am diving at snorkel depth the full command bridge looks out of the water -.- I wonder the bug doesn't exist at Practice-Mode in historical campaigns .. There everything goes fine. I have all realism activated, except the external Cam View...but i think that isn't the reason?! Im driving at 12 knots, diving to snorkel deepth, if i am under water, changing to e-engines, boat slows down to 7 knots and dives up, till diesel engines activating. Then it dives again, till the e-engines starting and so it goes on and on ... Hmm...this it how it looks if i stay still at 0 knots and diving manually to 20 meters. The ship is staying this way under water. Last edited by Spidergecko; 05-18-19 at 12:56 PM.

05-17-19, 05:37 PM	#2
XenonSurf Sea Lord Join Date: Apr 2008 Location: Germany, Italy Posts: 1,703 Downloads: 107 Uploads: 4	I think it can have to do with manual command of dive planes. When you are finished commanding them manually, reput them in auto mode. That's just an idea, I don't know if it's because of that. Do you use any external mods? You should not with WoS.

05-18-19, 03:39 AM	#3
Spidergecko Swabbie Join Date: Sep 2014 Posts: 5 Downloads: 31 Uploads: 0	Hello :-) Dive Planes standing on Auto. I just tried to change to manual cause of that error. But it doesnt have any effect :-( I only have the TWOS Addon newest Version installed. Nothing else :-/ I wonder cause in Training Mode (RAOBF PRACTICE) everything works fine :-/

05-18-19, 02:12 PM	#9
Spidergecko Swabbie Join Date: Sep 2014 Posts: 5 Downloads: 31 Uploads: 0	Euhh...i think you're right. I deinstalled the game and reinstalled it includes the TWOS addon and without the environment 15 everything works fine now! Wow thank you very much for your help :-)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode