NYGM 3 Super-mod (Current: 3.6 F, January 13th 2015) - Page 9

Stiebler · 10-21-08, 02:52 AM

@Kranz:

It is only very rarely that a game saved in mid-patrol will load successfully into an update of any of the major mods (including NYGM).

You should always start a new patrol in base for every update of any major mod. I have tested this new release heavily in patrols, and there are no problems in playing version 3.1 when starting a new patrol from your normal base.

Since you can reload your saved games by the restoration of NYGM 3.0, I suggest you return to base in version 3.0, and then replace it with version 3.1. Don't forget to add the IABL-ships mod *after* NYGM 3.1. You will not need the OLC Horizon fix after NYGM 3.1 is installed, because it is already installed with 3.1 (but not with 3.0).

Good luck!
Stiebler.

kranz · 10-21-08, 11:39 AM

It's a miracle! Hallelujah! It's working.

DarkStar173rd · 10-26-08, 01:50 AM

To Stiebler and the NYGM Team Thank you so very much its the only simulation I play now and I've been playing sims since 1976. Stay deep

Respectfully,
DS

Corsair · 10-27-08, 02:24 AM

After long break due to RL issues, finally downloaded the 3.1 update this week end and am back to business. Thks for keeping updating this great mod for us...

DarkStar173rd · 10-30-08, 03:46 PM

Running NYGM 3.1 want to add the Harbor Traffic Add-In. Will it matter should it be added before, after or does it matter with the IABL ShipsforNYGM3 Add-In. Thank you again for such a great mod.

Respectfully,
DS

Try Harbor Traffic Add-In, then IABL ShipsforNYGM3 Works for me.

Stiebler · 11-01-08, 04:06 AM

Quote:

Running NYGM 3.1 want to add the Harbor Traffic Add-In. Will it matter should it be added before, after or does it matter with the IABL ShipsforNYGM3 Add-In ...
Try Harbor Traffic Add-In, then IABL ShipsforNYGM3. Works for me.

You seem to have worked it out for yourself!

Rubini's 'Harbor Traffic' Add-In replaces only the campaign_SCR.mis file. Therefore it should be added *last*. However, the IABL ships Add-In does not affect the campaign_SCR.mis file, so it can be added last instead. (The IABL Add-In adds a lot of new ships without replacing other ships; it replaces the campaign_RND.mis file, and it replaces the zones.cfg file.)

Stiebler.

DarkStar173rd · 11-01-08, 09:39 PM

Luck was a factor for me on the Habor Add-In thought that one backwards thanx

Stiebler. Still on my 1st patrol and using your SH3 Cmdr 2.6 configuration settings for NYGM3.1 now with the final SH3 Cmdr3.1 new setting in Career Options-Start patrol at sea I leave uncheck....because somewhere between my 2nd and last patrol I'll use your SH3 Patrol Mod otherwise they would clash would'nt they? Thank you again for this great mod.

Respectfully,
DS

Stiebler · 11-02-08, 04:28 AM

@DarkStar173rd:

No, SH3Patrol and SH3Commander don't clash, because they alter different files (deliberately).

However, there is no purpose in using both mods to achieve the same results, such as adjusting times at a U-tanker. SH3Commander requires you to exit completely from Silent Hunter III before use. SH3Patrol requires you only to exit from your patrol and return to the main menu, so it is more convenient for its particular purposes. Really, SH3Patrol is designed mainly to assist you when going to (and departing from) a U-tanker.

Stiebler.

Ktl_KUrtz · 11-02-08, 09:41 AM

Hi Stiebler,
I want to say thanks for this excellent mod!
It is so cool to have something that my old computer (6 next Birthday) can run!
It is total Immersion running this game, the Best.
I am looking forward to running it with IABL new ships.
KUrtz

DarkStar173rd · 11-02-08, 11:26 AM

Welcome aboard KTL NYGM its great ain't it. Ahh! guy I can smell the green paint on your motherboard its so...new compare to mine, why my final upgrading BIOS on a TH7-II Asus Mb, 2.6Gb processor (maxout),512 Rdram memory($300US to upgrade to 1Gb), 6800GS BFG Nvida AGP graphics card, CreaLive soundcard. Puts my powerhouse machine somewhere between 11-13 yrs. old, I built it and have the receipts but...the print has faded on them thats why Im not sure about the age. I not only run IABL Ships Mod and the Habor Add-In Mod with all heck breaking loose around me I still get 35-40FPS but on returning off this 1st patrol going to try PT Sound mod, so yeah enjoy NYGM its the best of the best. Oh Mr. Stiebler thanx for the heads-up on Sh3 Patrol thingee Im lovin it, Stay Deep All

Respectfully,
DS

Ktl_KUrtz · 11-04-08, 12:57 PM

Hi Stiebler,
I keep getting this message everytime I try to start a SingleMission and sometimes it happens if i try to start a new Career.
I get the message..."Zu viele Matrasen! Gehen Sie zur Kaserne."
I play in German but I do not speak the language.
Can anybody tell me what it means and how to I get back to playing SingleMissions?
Thanks in advance.
KUrtz

Jimbuna · 11-04-08, 01:02 PM

Quote:

Originally Posted by Ktl_KUrtz

Hi Stiebler,
I keep getting this message everytime I try to start a SingleMission and sometimes it happens if i try to start a new Career.
I get the message..."Zu viele Matrasen! Gehen Sie zur Kaserne."
I play in German but I do not speak the language.
Can anybody tell me what it means and how to I get back to playing SingleMissions?
Thanks in advance.
KUrtz

Too many Matrasen! Go to the barracks

dinazor · 11-05-08, 05:34 AM

I must thank to Stiepler at first for NYGM . He is a great man.

But I have a problem.
I finished my last duty at N23 and turn back to Bergen. It was August 1944 and I had my new XXI ship at last. But it was impossible to select it because of the “to many officers” message. I did everything to solve that problem then my carrier deleted by mistake.

I begun new carrier at 1994 in Bergen with XXI. Selection torpedoes or manage crew was no problem. However, game newer started and my pc locked.

Now, I only want to learn that if anybody has same problem for XXI like me? If it’s not, that means I have to delete all SH3 files and reload again with NYGM3.1.

Thank you reading that message and future help for me.

Dinazor
(SH3+patch1.4.+NYGm2.5+NYGM3.1)

Ktl_KUrtz · 11-05-08, 09:07 AM

Quote:

Originally Posted by jimbuna

Quote:

Originally Posted by Ktl_KUrtz

Hi Stiebler,
I keep getting this message everytime I try to start a SingleMission and sometimes it happens if i try to start a new Career.
I get the message..."Zu viele Matrasen! Gehen Sie zur Kaserne."
I play in German but I do not speak the language.
Can anybody tell me what it means and how to I get back to playing SingleMissions?
Thanks in advance.
KUrtz

Too many Matrasen! Go to the barracks

Hi Jimbuna,
Forgive my ignorance but how do I get into the barracks do you know?
I also have guys on the boat who are blue with a red circle on em!
Can you tell me what that means?
Thanks if you can help.
KUrtz

evan82 · 11-05-08, 09:16 AM

Quote:

Originally Posted by dinazor

I must thank to Stiepler at first for NYGM . He is a great man.

But I have a problem.
I finished my last duty at N23 and turn back to Bergen. It was August 1944 and I had my new XXI ship at last. But it was impossible to select it because of the “to many officers” message. I did everything to solve that problem then my carrier deleted by mistake.

I begun new carrier at 1994 in Bergen with XXI. Selection torpedoes or manage crew was no problem. However, game newer started and my pc locked.

Now, I only want to learn that if anybody has same problem for XXI like me? If it’s not, that means I have to delete all SH3 files and reload again with NYGM3.1.

Thank you reading that message and future help for me.

Dinazor
(SH3+patch1.4.+NYGm2.5+NYGM3.1)

Too many oficers on XXI.
How many oficers? :hmm:

10-21-08, 02:52 AM	#121
Stiebler Fuel Supplier Join Date: Oct 2005 Location: London, UK Posts: 1,237 Downloads: 29 Uploads: 4	@Kranz: It is only very rarely that a game saved in mid-patrol will load successfully into an update of any of the major mods (including NYGM). You should always start a new patrol in base for every update of any major mod. I have tested this new release heavily in patrols, and there are no problems in playing version 3.1 when starting a new patrol from your normal base. Since you can reload your saved games by the restoration of NYGM 3.0, I suggest you return to base in version 3.0, and then replace it with version 3.1. Don't forget to add the IABL-ships mod after NYGM 3.1. You will not need the OLC Horizon fix after NYGM 3.1 is installed, because it is already installed with 3.1 (but not with 3.0). Good luck! Stiebler. __________________ NYGM Tonnage War Mod - More than a mod: it's an experience!

10-27-08, 02:24 AM	#124
Corsair Ace of the Deep Join Date: Nov 2006 Location: Toulouse France Posts: 1,140 Downloads: 51 Uploads: 0	After long break due to RL issues, finally downloaded the 3.1 update this week end and am back to business. Thks for keeping updating this great mod for us... __________________ NYGM 3.4A / Living SH3 V5.1 + SH3 Commander

10-30-08, 03:46 PM	#125
DarkStar173rd Watch Join Date: May 2007 Location: Philadelphia PA Posts: 27 Downloads: 145 Uploads: 0	Order of Battle Running NYGM 3.1 want to add the Harbor Traffic Add-In. Will it matter should it be added before, after or does it matter with the IABL ShipsforNYGM3 Add-In. Thank you again for such a great mod. Respectfully, DS Try Harbor Traffic Add-In, then IABL ShipsforNYGM3 Works for me. Last edited by DarkStar173rd; 10-30-08 at 08:57 PM.

11-01-08, 09:39 PM	#127
DarkStar173rd Watch Join Date: May 2007 Location: Philadelphia PA Posts: 27 Downloads: 145 Uploads: 0	SH3Patrol Mod and ShCmdr3.1 Luck was a factor for me on the Habor Add-In thought that one backwards thanx Stiebler. Still on my 1st patrol and using your SH3 Cmdr 2.6 configuration settings for NYGM3.1 now with the final SH3 Cmdr3.1 new setting in Career Options-Start patrol at sea I leave uncheck....because somewhere between my 2nd and last patrol I'll use your SH3 Patrol Mod otherwise they would clash would'nt they? Thank you again for this great mod. Respectfully, DS

11-02-08, 04:28 AM	#128
Stiebler Fuel Supplier Join Date: Oct 2005 Location: London, UK Posts: 1,237 Downloads: 29 Uploads: 4	@DarkStar173rd: No, SH3Patrol and SH3Commander don't clash, because they alter different files (deliberately). However, there is no purpose in using both mods to achieve the same results, such as adjusting times at a U-tanker. SH3Commander requires you to exit completely from Silent Hunter III before use. SH3Patrol requires you only to exit from your patrol and return to the main menu, so it is more convenient for its particular purposes. Really, SH3Patrol is designed mainly to assist you when going to (and departing from) a U-tanker. Stiebler. __________________ NYGM Tonnage War Mod - More than a mod: it's an experience!

10-21-08, 11:39 AM	#122
kranz The Old Man Join Date: Aug 2007 Location: Poland Posts: 1,430 Downloads: 5 Uploads: 0	It's a miracle! Hallelujah! It's working.

10-26-08, 01:50 AM	#123
DarkStar173rd Watch Join Date: May 2007 Location: Philadelphia PA Posts: 27 Downloads: 145 Uploads: 0	To Stiebler and the NYGM Team Thank you so very much its the only simulation I play now and I've been playing sims since 1976. Stay deep Respectfully, DS

11-02-08, 09:41 AM	#129
Ktl_KUrtz Frogman Join Date: Aug 2008 Location: U-301 Posts: 291 Downloads: 800 Uploads: 8	Hi Stiebler, I want to say thanks for this excellent mod! It is so cool to have something that my old computer (6 next Birthday) can run! It is total Immersion running this game, the Best. I am looking forward to running it with IABL new ships. KUrtz __________________ http://www.subsim.com/radioroom/down...p?do=cat&id=83 Last edited by Ktl_KUrtz; 11-02-08 at 03:39 PM.

11-02-08, 11:26 AM	#130
DarkStar173rd Watch Join Date: May 2007 Location: Philadelphia PA Posts: 27 Downloads: 145 Uploads: 0	KTL New Puter Welcome aboard KTL NYGM its great ain't it. Ahh! guy I can smell the green paint on your motherboard its so...new compare to mine, why my final upgrading BIOS on a TH7-II Asus Mb, 2.6Gb processor (maxout),512 Rdram memory($300US to upgrade to 1Gb), 6800GS BFG Nvida AGP graphics card, CreaLive soundcard. Puts my powerhouse machine somewhere between 11-13 yrs. old, I built it and have the receipts but...the print has faded on them thats why Im not sure about the age. I not only run IABL Ships Mod and the Habor Add-In Mod with all heck breaking loose around me I still get 35-40FPS but on returning off this 1st patrol going to try PT Sound mod, so yeah enjoy NYGM its the best of the best. Oh Mr. Stiebler thanx for the heads-up on Sh3 Patrol thingee Im lovin it, Stay Deep All Respectfully, DS

11-04-08, 12:57 PM	#131
Ktl_KUrtz Frogman Join Date: Aug 2008 Location: U-301 Posts: 291 Downloads: 800 Uploads: 8	Hi Stiebler, I keep getting this message everytime I try to start a SingleMission and sometimes it happens if i try to start a new Career. I get the message..."Zu viele Matrasen! Gehen Sie zur Kaserne." I play in German but I do not speak the language. Can anybody tell me what it means and how to I get back to playing SingleMissions? Thanks in advance. KUrtz __________________ http://www.subsim.com/radioroom/down...p?do=cat&id=83

11-05-08, 05:34 AM	#133
dinazor Swabbie Join Date: May 2007 Posts: 13 Downloads: 236 Uploads: 0	XXI problem I must thank to Stiepler at first for NYGM . He is a great man. But I have a problem. I finished my last duty at N23 and turn back to Bergen. It was August 1944 and I had my new XXI ship at last. But it was impossible to select it because of the “to many officers” message. I did everything to solve that problem then my carrier deleted by mistake. I begun new carrier at 1994 in Bergen with XXI. Selection torpedoes or manage crew was no problem. However, game newer started and my pc locked. Now, I only want to learn that if anybody has same problem for XXI like me? If it’s not, that means I have to delete all SH3 files and reload again with NYGM3.1. Thank you reading that message and future help for me. Dinazor (SH3+patch1.4.+NYGm2.5+NYGM3.1)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode