LIVING SILENT HUNTER III EDITION 2015 - News & Download - Page 84

THEBERBSTER · 02-08-19, 06:24 AM

Hi steevo
All looks good in the mod list.
Strange that SH3 and 5 have a problem but 4 does not.
Have you tried 3 and 5 in stock mode un-modded?
If yes were you still having the same problems?
Are all 3 games STEAM downloads?

Peter

steevo45 · 02-08-19, 07:32 AM

Hi Berbster,
Thanks, good point. Haven't tried SH3 and SH5 unmodded for years and only the SH3 is a steam download which leads me to think that the problem is not through steam. Maybe my old laptop, as I've had it since end of 2012....

I suppose LSH can still be played without using the sub interior, just like the old SH2!

THEBERBSTER · 02-08-19, 12:43 PM

Hi steevo
I am interested to hear you reply whether SH3 with LSH3-2015 installed but un-modded if you are still getting the internal problem or not?
Peter

steevo45 · 02-09-19, 08:12 AM

Hi Berbster,
I just tried the unmodded version and had exactly the same problems when in the sub interior.
This weirdness started about a year ago with GWX as well. I remember just after an Nvidia graphic driver update. Is there a way of reverting back to an earlier graphics driver, 2 years back for example. It may be the solution!!
Cheers
Steve

steevo45 · 02-09-19, 09:06 AM

Hi Again,
Just rolled back the Nvidia driver back to 2017 version but no difference, the same problem as always!

propbeanie · 02-09-19, 09:55 AM

You might have some "cross-contamination" in your game. The game install folder uses the Save folder for a lot of the information it uses when it runs the game. If there was a mod conflict from before, or you loaded a GWX save in LSH enabled set-up, then you run the risk of "cross-contamination". You might be better off re-installing the game. When you go to do that, be sure and clear your SH3 Save folder, which usually is found at "C:\Unsers \UserName \My Documents \SH3". That will, of necessity, remove all your saves from the next install.

THEBERBSTER · 02-09-19, 07:07 PM

Hi pb
The problem steevo has is not just SH3 but in SH5 also but not SH4.
It has to be a system problem IMO, too much of a coincidence to have the same type of problem in two totally different games I think.
SH3 has no graphic control as such, unlike SH4 and SH5.

Peter

steevo45 · 02-10-19, 11:13 AM

Uninstalled everything including the Sh3 files in documents and reinstalled on steam. Still the same problems even steam vanilla version.
I admit defeat I think.
Maybe when I get a new laptop I'll try again.....
I've really appreciated all your continued advice throughout. Subsim is great and I will get around to donating as soon as I finally make some progress in the future.
Regards
Steevo

GOZO · 03-15-19, 12:32 PM

Hi. Love Lsh3 15. All working fine until I trying to start a career at 30 flot constanza. Began at Erprobungsstelle and was transverred to 30:th flotilla. All good but after gameststart I end up in the middle of the S Atlantic????

I use SH3 Commander andlig I remember egen playing GWX/SH 3 commander there was an additional black sea campaign to make it Work.
Have gone through the LSH3 15 manuals but vant fond anything???

Plus any ideas???

Gozo

ThePrody · 03-15-19, 01:18 PM

Disable the bunker start mod and try again

GOZO · 03-16-19, 06:49 AM

Ok. Thnx !😊. Will try that

Gozo

GOZO · 03-17-19, 07:21 AM

Quote:

Originally Posted by ThePrody

Disable the bunker start mod and try again

Guess I have to have all my three careers in port before doing this...

THEBERBSTER · 03-17-19, 07:38 AM

Hi GOZO
Please post your mod list
JSGME How To Export Your Mod List To A Subsim Post > Pictorial
Don't forget to check out my tutorials from my signature.

Peter

GOZO · 03-17-19, 09:51 AM

Quote:

Originally Posted by THEBERBSTER

Hi GOZO
Please post your mod list
JSGME How To Export Your Mod List To A Subsim Post > Pictorial
Don't forget to check out my tutorials from my signature.

Peter

Generic Mod Enabler - v2.6.0.157
[E:\SH3\SilentHunter3LSH1.5\MODS]

OK Here it is

_LSH3-2015___FULLVERSION
New Lorient v1 - LSH3-2015_BunkerStart
_LSH3-2015__HistoricalMessages
_LSH3-2015_ATM_GreenWater
_LSH3-2015_ATM_GreenWater-SunFix
_LSH3-2015_SLS_SpecialEffectsBig
_LSH3-2015_GUI_OLC
_LSH3-2015__ExtentedChallengeBlackContacts
O2-Gauges v2
_LSH3-2015___Patch_HSIE-V16B1
Supplement to V16B1 (JSGME)

THEBERBSTER · 03-17-19, 04:16 PM

Hi GOZO
You have enabled additions that are not recognized as being a part of LSH3-2015 and that will be your problem.

I do not recognize this mod?
New Lorient v1 - LSH3-2015_BunkerStart

What is this supplement?
LSH3-2015 comes with a full working installed HSIE application which can be customized by the player.

_LSH3-2015___Patch_HSIE-V16B1
Supplement to V16B1 (JSGME)

Peter

02-08-19, 06:24 AM	#1246
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Dibden Purlieu - Southampton Posts: 9,605 Downloads: 1123 Uploads: 0	Hi steevo All looks good in the mod list. Strange that SH3 and 5 have a problem but 4 does not. Have you tried 3 and 5 in stock mode un-modded? If yes were you still having the same problems? Are all 3 games STEAM downloads? Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

02-08-19, 07:32 AM	#1247
steevo45 A-ganger Join Date: Sep 2009 Location: Kazakhstan Posts: 77 Downloads: 483 Uploads: 0	Weird Graphics! Hi Berbster, Thanks, good point. Haven't tried SH3 and SH5 unmodded for years and only the SH3 is a steam download which leads me to think that the problem is not through steam. Maybe my old laptop, as I've had it since end of 2012.... I suppose LSH can still be played without using the sub interior, just like the old SH2!

02-08-19, 12:43 PM	#1248
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Dibden Purlieu - Southampton Posts: 9,605 Downloads: 1123 Uploads: 0	Hi steevo I am interested to hear you reply whether SH3 with LSH3-2015 installed but un-modded if you are still getting the internal problem or not? Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

02-09-19, 08:12 AM	#1249
steevo45 A-ganger Join Date: Sep 2009 Location: Kazakhstan Posts: 77 Downloads: 483 Uploads: 0	Weird Graphics! Hi Berbster, I just tried the unmodded version and had exactly the same problems when in the sub interior. This weirdness started about a year ago with GWX as well. I remember just after an Nvidia graphic driver update. Is there a way of reverting back to an earlier graphics driver, 2 years back for example. It may be the solution!! Cheers Steve

02-09-19, 09:06 AM	#1250
steevo45 A-ganger Join Date: Sep 2009 Location: Kazakhstan Posts: 77 Downloads: 483 Uploads: 0	Weird Graphics! Hi Again, Just rolled back the Nvidia driver back to 2017 version but no difference, the same problem as always!

02-09-19, 09:55 AM	#1251
propbeanie CTD - it's not just a job Join Date: May 2016 Location: One hour from Music City USA! Posts: 9,734 Downloads: 439 Uploads: 2	You might have some "cross-contamination" in your game. The game install folder uses the Save folder for a lot of the information it uses when it runs the game. If there was a mod conflict from before, or you loaded a GWX save in LSH enabled set-up, then you run the risk of "cross-contamination". You might be better off re-installing the game. When you go to do that, be sure and clear your SH3 Save folder, which usually is found at "C:\Unsers \UserName \My Documents \SH3". That will, of necessity, remove all your saves from the next install. __________________ "...and bollocks to the naysayer/s" - Jimbuna

02-09-19, 07:07 PM	#1252
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Dibden Purlieu - Southampton Posts: 9,605 Downloads: 1123 Uploads: 0	Hi pb The problem steevo has is not just SH3 but in SH5 also but not SH4. It has to be a system problem IMO, too much of a coincidence to have the same type of problem in two totally different games I think. SH3 has no graphic control as such, unlike SH4 and SH5. Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

02-10-19, 11:13 AM	#1253
steevo45 A-ganger Join Date: Sep 2009 Location: Kazakhstan Posts: 77 Downloads: 483 Uploads: 0	Weird Graphics! Uninstalled everything including the Sh3 files in documents and reinstalled on steam. Still the same problems even steam vanilla version. I admit defeat I think. Maybe when I get a new laptop I'll try again..... I've really appreciated all your continued advice throughout. Subsim is great and I will get around to donating as soon as I finally make some progress in the future. Regards Steevo

03-15-19, 12:32 PM	#1254
GOZO Commander Join Date: Aug 2004 Location: Linkoping, Sweden Posts: 478 Downloads: 176 Uploads: 0	Black sea? Hi. Love Lsh3 15. All working fine until I trying to start a career at 30 flot constanza. Began at Erprobungsstelle and was transverred to 30:th flotilla. All good but after gameststart I end up in the middle of the S Atlantic???? I use SH3 Commander andlig I remember egen playing GWX/SH 3 commander there was an additional black sea campaign to make it Work. Have gone through the LSH3 15 manuals but vant fond anything??? Plus any ideas??? Gozo __________________ SHIV:TMo 2.5, RSRD, SCAF OLC, Ralle's modpack SHIV: WDAD, Med Campaign SHIII: GWX3 GOLD, OLCII Gold, ACM-reloaded interface mod, SHIIIcmndr 3.2, Full Realism/DiD SHIII: LSH3 2015 Cold Waters with all bells and whistles Finally SHV but still unmodded and still a noob....

03-15-19, 01:18 PM	#1255
ThePrody not dead yet Join Date: May 2017 Location: Romania Posts: 193 Downloads: 130 Uploads: 1	Disable the bunker start mod and try again

03-16-19, 06:49 AM	#1256
GOZO Commander Join Date: Aug 2004 Location: Linkoping, Sweden Posts: 478 Downloads: 176 Uploads: 0	Black sea. Ok. Thnx !😊. Will try that Gozo __________________ SHIV:TMo 2.5, RSRD, SCAF OLC, Ralle's modpack SHIV: WDAD, Med Campaign SHIII: GWX3 GOLD, OLCII Gold, ACM-reloaded interface mod, SHIIIcmndr 3.2, Full Realism/DiD SHIII: LSH3 2015 Cold Waters with all bells and whistles Finally SHV but still unmodded and still a noob....

03-17-19, 07:38 AM	#1258
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Dibden Purlieu - Southampton Posts: 9,605 Downloads: 1123 Uploads: 0	Hi GOZO Please post your mod list JSGME How To Export Your Mod List To A Subsim Post > Pictorial Don't forget to check out my tutorials from my signature. Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

03-17-19, 04:16 PM	#1260
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Dibden Purlieu - Southampton Posts: 9,605 Downloads: 1123 Uploads: 0	Hi GOZO You have enabled additions that are not recognized as being a part of LSH3-2015 and that will be your problem. I do not recognize this mod? New Lorient v1 - LSH3-2015_BunkerStart What is this supplement? LSH3-2015 comes with a full working installed HSIE application which can be customized by the player. _LSH3-2015___Patch_HSIE-V16B1 Supplement to V16B1 (JSGME) Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode