Forcing aircraft to remain on the CV

Morgan · 05-07-06, 07:41 AM

I need your help. I'm working on a mission where I would like the Kitty Hawk carrier to not launch any aircrafts through the entire mission. Is there a way to force it to not launch any aircrafts. I know I could do it by "Add inflight aircraft" option (by adding all aircrafts inflight and setting probability of inclusion to 0), but since the CV has about 40-50 aircrafts on board, that would take a while. So anybody can help me, please?

Kapitan · 05-07-06, 04:01 PM

Might be able to script it so it doesnt launch aircraft not sure failing that i think you can remove the air craft.

LuftWolf · 05-07-06, 05:53 PM

Have you tried setting its tactic to "transit"?

MaHuJa · 05-07-06, 11:01 PM

If you open the mission file in notepad, you can change its complement of aircraft. I don't remember how, though. At worst, remove the line specifying which air loadout it has.

LuftWolf · 05-07-06, 11:07 PM

And while you're there... find the line for the sea state and set it to something like 9 or 10... then try something bigger.

Don't forget to set the windspeed at 10000kts!

Morgan · 05-08-06, 03:33 AM

Thanks very much, i'm going to try both.
I won't be able to choose "transit" tactics, because she's a group leader in this mission.

Micksp · 05-10-06, 04:26 AM

Dear Morgan,
You can also set the ROE for CV to Peacetime in the beginning by script. Later they can be changed to War after meating dessired criteria by triger. You can also use Flight Shedule option for career aircrafts.

Morgan · 05-13-06, 01:35 PM

Thank you Micksp! The ROE was peacetime at the beginning of the mission, but the CV's aircrafts took off sometimes. The flight schedule is a good idea, but it allows only 30 mins to be chosen, so after half an hour aircrafts would take off I think.
The solution with opening the mission in notepad worked, I only had to set the number of planes to 0.
Thanks everyone for the help!

Palindromeria · 05-14-06, 10:50 PM

i thought if you dont assign ANY aircraft to flight schedule none take off.

no ?

MaHuJa · 05-15-06, 12:04 PM

It just takes 60 minutes from they decide to launch until they're in the air.

By default, all planes are at alert 60.

Doc Savage · 05-18-06, 12:54 PM

I faced a similar problem when I wanted a FFG to not launch helos.
What I did was to place the helo in the air to begin with and then ran a "Remove Platform" script at mission start to remove it.
It didn't have anything to launch after that.
Should work with the CV as well...

LuftWolf · 05-18-06, 09:03 PM

Quote:

Originally Posted by Doc Savage

I faced a similar problem when I wanted a FFG to not launch helos.
What I did was to place the helo in the air to begin with and then ran a "Remove Platform" script at mission start to remove it.
It didn't have anything to launch after that.
Should work with the CV as well...

Couldn't you have also removed the helos from the FFG entirely at the mission editor loadout screen?

TLAM Strike · 05-18-06, 09:10 PM

Quote:

Originally Posted by Morgan

I know I could do it by "Add inflight aircraft" option (by adding all aircrafts inflight and setting probability of inclusion to 0), but since the CV has about 40-50 aircrafts on board, that would take a while.

Make one POI=0 Aircraft and then copy it a bunch of times would work. You might need to start over for each aircraft type but it should take a lot of time off the task.

Doc Savage · 05-18-06, 10:03 PM

Quote:

Originally Posted by LuftWolf

Quote:

Originally Posted by Doc Savage

I faced a similar problem when I wanted a FFG to not launch helos.
What I did was to place the helo in the air to begin with and then ran a "Remove Platform" script at mission start to remove it.
It didn't have anything to launch after that.
Should work with the CV as well...

Couldn't you have also removed the helos from the FFG entirely at the mission editor loadout screen?

It doesn't seem posible. I see a "Default Loadout" option with one helo and a "Loadout 1" option with two. Nothing with zero (this is an OHP)

Palindromeria · 05-19-06, 11:02 PM

Quote:

Originally Posted by MaHuJa

It just takes 60 minutes from they decide to launch until they're in the air.

By default, all planes are at alert 60.

wasnt aware of that
thanks

05-07-06, 07:41 AM	#1
Morgan Swabbie Join Date: Mar 2006 Location: Budapest Posts: 11 Downloads: 2 Uploads: 0	Forcing aircraft to remain on the CV I need your help. I'm working on a mission where I would like the Kitty Hawk carrier to not launch any aircrafts through the entire mission. Is there a way to force it to not launch any aircrafts. I know I could do it by "Add inflight aircraft" option (by adding all aircrafts inflight and setting probability of inclusion to 0), but since the CV has about 40-50 aircrafts on board, that would take a while. So anybody can help me, please?

05-07-06, 04:01 PM	#2
Kapitan Sub Test Pilot Join Date: Mar 2005 Location: UK + Canada Posts: 7,090 Downloads: 68 Uploads: 7	Might be able to script it so it doesnt launch aircraft not sure failing that i think you can remove the air craft. __________________ DONT FORGET if you like a post to nominate it by using the blue diamond Find out about Museum Ships here: https://www.museumships.us/ Flickr for all my pictures: https://www.flickr.com/photos/131313936@N03/ Navy general board articles: https://www.navygeneralboard.com/author/aegis/

05-07-06, 05:53 PM	#3
LuftWolf Ocean Warrior Join Date: May 2005 Location: Free New York Posts: 3,167 Downloads: 2 Uploads: 0	Have you tried setting its tactic to "transit"? __________________ LW

05-07-06, 11:01 PM	#4
MaHuJa Sonar Guy Join Date: Jan 2002 Location: 59.96156N 11.02255E Posts: 385 Downloads: 3 Uploads: 0	If you open the mission file in notepad, you can change its complement of aircraft. I don't remember how, though. At worst, remove the line specifying which air loadout it has. __________________ Teaching DW newbies how to climb the food chain.

05-07-06, 11:07 PM	#5
LuftWolf Ocean Warrior Join Date: May 2005 Location: Free New York Posts: 3,167 Downloads: 2 Uploads: 0	And while you're there... find the line for the sea state and set it to something like 9 or 10... then try something bigger. Don't forget to set the windspeed at 10000kts! __________________ LW

05-08-06, 03:33 AM	#6
Morgan Swabbie Join Date: Mar 2006 Location: Budapest Posts: 11 Downloads: 2 Uploads: 0	Thanks very much, i'm going to try both. I won't be able to choose "transit" tactics, because she's a group leader in this mission.

05-10-06, 04:26 AM	#7
Micksp Sailor man Join Date: Apr 2002 Location: Burgas, Bulgaria Posts: 50 Downloads: 31 Uploads: 0	Dear Morgan, You can also set the ROE for CV to Peacetime in the beginning by script. Later they can be changed to War after meating dessired criteria by triger. You can also use Flight Shedule option for career aircrafts.

05-13-06, 01:35 PM	#8
Morgan Swabbie Join Date: Mar 2006 Location: Budapest Posts: 11 Downloads: 2 Uploads: 0	Thank you Micksp! The ROE was peacetime at the beginning of the mission, but the CV's aircrafts took off sometimes. The flight schedule is a good idea, but it allows only 30 mins to be chosen, so after half an hour aircrafts would take off I think. The solution with opening the mission in notepad worked, I only had to set the number of planes to 0. Thanks everyone for the help!

05-14-06, 10:50 PM	#9
Palindromeria Planesman Join Date: Sep 2001 Location: Brooklyn NY Posts: 199 Downloads: 0 Uploads: 0	i thought if you dont assign ANY aircraft to flight schedule none take off. no ?

05-15-06, 12:04 PM	#10
MaHuJa Sonar Guy Join Date: Jan 2002 Location: 59.96156N 11.02255E Posts: 385 Downloads: 3 Uploads: 0	It just takes 60 minutes from they decide to launch until they're in the air. By default, all planes are at alert 60. __________________ Teaching DW newbies how to climb the food chain.

05-18-06, 12:54 PM	#11
Doc Savage Seaman Join Date: Feb 2006 Posts: 32 Downloads: 0 Uploads: 0	I faced a similar problem when I wanted a FFG to not launch helos. What I did was to place the helo in the air to begin with and then ran a "Remove Platform" script at mission start to remove it. It didn't have anything to launch after that. Should work with the CV as well...