FS9 Taming the Alpha/Virtavia Blackhawk.

ET2SN · 09-27-22, 06:18 PM

If landing the Blackhawk/Pavehawk in FS2004 is causing you to question your sanity, the problem is in the gear and scrape section of your Aircraft.cfg file.

Page down to the [contact_points] section and replace the POINT.X lines with the following:

point.0 = 1, -24.60, 0.00, -8.25, 5500, 0, 0.95, 90, .82, 1.3, 0.7, 0, 0, 2, 00, 300 ; tail wheel
point.1 = 1, 4.30, -4.35, -6.83, 2800, 1, 1.50, 0, .90, 1.3, 0.5, 0, 0, 3, 00, 300 ; left wheel
point.2 = 1, 4.30, 4.35, -6.83, 2800, 2, 1.50, 0, .90, 1.3, 0.5, 0, 0, 3, 00, 300 ; right wheel

point.3=2, 26.075, 0.0, 3.900, 10.0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0, 0, 5, 0, 0
point.4=2, 0.0, 26.250, 4.275, 10.0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0, 0, 6, 0, 0
point.5=2, 0.0, -26.250, 4.275, 10.0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0, 0, 9, 0, 0
point.6=2, -35.550, 1.0, 4.100, 10.0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0, 0, 9, 0, 0

point.7= 5, 0.00, 0.00, 0.00, 0, 0, 0.00, 0, 0.00, 0.00, 0.00, 0.20, 0.20, 0, 0, 0 //Artificial water rudder for animations

Just highlight and COPY the section above. Be SURE to right-click the .cfg file and OPEN WITH NOTEPAD. This is a raw text file.

Erase the old POINT lines then paste in the new ones from above and save. This also puts the tires in a better position on the ground if you're using a larger screen and higher resolutions.

09-27-22, 06:18 PM	#1
ET2SN Ocean Warrior Join Date: Oct 2017 Posts: 2,571 Downloads: 60 Uploads: 0	FS9 Taming the Alpha/Virtavia Blackhawk. If landing the Blackhawk/Pavehawk in FS2004 is causing you to question your sanity, the problem is in the gear and scrape section of your Aircraft.cfg file. Page down to the [contact_points] section and replace the POINT.X lines with the following: point.0 = 1, -24.60, 0.00, -8.25, 5500, 0, 0.95, 90, .82, 1.3, 0.7, 0, 0, 2, 00, 300 ; tail wheel point.1 = 1, 4.30, -4.35, -6.83, 2800, 1, 1.50, 0, .90, 1.3, 0.5, 0, 0, 3, 00, 300 ; left wheel point.2 = 1, 4.30, 4.35, -6.83, 2800, 2, 1.50, 0, .90, 1.3, 0.5, 0, 0, 3, 00, 300 ; right wheel point.3=2, 26.075, 0.0, 3.900, 10.0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0, 0, 5, 0, 0 point.4=2, 0.0, 26.250, 4.275, 10.0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0, 0, 6, 0, 0 point.5=2, 0.0, -26.250, 4.275, 10.0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0, 0, 9, 0, 0 point.6=2, -35.550, 1.0, 4.100, 10.0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0, 0, 9, 0, 0 point.7= 5, 0.00, 0.00, 0.00, 0, 0, 0.00, 0, 0.00, 0.00, 0.00, 0.20, 0.20, 0, 0, 0 //Artificial water rudder for animations Just highlight and COPY the section above. Be SURE to right-click the .cfg file and OPEN WITH NOTEPAD. This is a raw text file. Erase the old POINT lines then paste in the new ones from above and save. This also puts the tires in a better position on the ground if you're using a larger screen and higher resolutions.