SUBSIM Radio Room Forums

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)
-   SH5 Mods Workshop (https://www.subsim.com/radioroom/forumdisplay.php?f=249)
-   -   Wolves of Steel Black Screen (https://www.subsim.com/radioroom/showthread.php?t=218868)

MrGoTime 03-08-15 11:04 PM

Wolves of Steel Black Screen
 
Apologies if this has been addressed elsewhere. I followed directions on the Wolves of Steel 1.03 installation and whenever I start SH5, I get a black screen and seemingly a broken loop of music.

Anyone else see this issue and know how to fix it? Help is appreciated, thanks.

Echolot 03-09-15 01:50 AM

Just wait a little longer, it can take a few minutes at the first run.

:salute:

MrGoTime 03-09-15 12:13 PM

Well don't I feel foolish! That worked great.

Thanks! See you at sea!

barok129 06-28-18 11:28 PM

I did the exact same thing! Needed only to wait another 60 seconds or so!!
Thanks!!

:Kaleun_Salute:

THEBERBSTER 06-29-18 03:44 AM

A Warm Welcome To The Subsim Community > barok 129 where have you been hiding all these years?
Subsim <> Make A Donation <> See The Benefits <> Support The Community
SH3 – 4 - 5 Tutorials And Other Information Links In My Signature Below

Green_Alien 07-16-18 04:29 AM

I have the same problem. It occurs only with this mod, the base game works fine. Waiting doesn't solve it.

Some things I've tried:

Changing compatibility to win 7
Changing compatibility to ban DPI adjustment
Changing main.cfg as per this guy's pasting (resolution on ubisoft intro video still seems fine)
Changing that then to windowed mode
Running as administrator

THEBERBSTER 07-16-18 05:11 AM

A Warm Welcome To The Subsim Community > Green Alien
Subsim <> Make A Donation <> See The Benefits <> Support The Community
SH3 – 4 - 5 Tutorials And Other Information Links In My Signature Below

Post #5 Update SH5 From v1.0.5.0 To v1.2.0 Immediately After Installing > Pictorial

Make sure your gpu is setup correctly.
Post #239 Changing The Nvidia GPU Settings > Essential Settings > Pictorial > Missing pictures replaced

Try this fix.
Post #412 Override High DPI Scaling Behavior > Pictorial > Missing pictures replaced

Remember when the TWoS image disappears off the loading screen for the game to load to the main menu there is a time delay which maybe several minutes depending on your systems performance.
During this time you will not hear anything and will only see a black screen.

Other useful information and fixes.
Solving Problems In Windows 10 > Undo & Temporarily Prevent Driver Updates > Roll Back Driver < Remove & Replace Driver > Block Driver Update > How To Stop Automatic Driver Updates > Local Group Policy Editor > Registry > Keep Your Drivers Under Control > Internet Pictorial By MUD > Acknowledgement to hauanqua for finding this useful information.

Green_Alien 07-16-18 08:06 AM

The SH5 is updated properly and immediately
Not sure if changing Nvidia GPU settings is going to change anything if base game runs fine.
DPI override has been performed as noted earlier.


The HDD works for a while and then the screen stays black even after many minutes.

THEBERBSTER 07-16-18 10:17 AM

Hi GA
You should not need a compatibility mode with Windows 10 for SH5.


Check this out and trace your steps as to missing something that you should have done.
Pay special attention to the PDF installation instructions how to start your game before enabling mods.
Post #433 A Pictorial Step By Step Guide Through The Wolves Of Steel (TWOS) Installer > Pictorial

What are your systems specs?
With my SSD drive it takes 3 minutes 22 seconds from when the TWOS loding screen disappears to the main menu appearing.
With a mechanical Hard drive I suspect you are looking at over 5 minutes.

You could also have a look in Silent Hunter 5\data\Applications where you will find the Dgbview application.
Start this before using your SH5.exe and it will give you lists of what is happening as the game is loading.
If there is a problem then it should tell you what it is.

Another useful source of information is the Log file which you will find in the main menu.

Peter

Green_Alien 07-16-18 10:45 AM

Ah I forgot to delete the .cfg file. That fixed it and the game loaded. :)

Now I have a different problem - the speed and depth indicators are showing the number 0, even when I accelerate or dive down, and when I click on the left sidebar for commands like "periscope depth" "surface the boat" etc. it does nothing.

XenonSurf 07-16-18 11:37 AM

If you are on the bridge and click on 'periscope depth or 'dive' or other submerged commands it will do nothing, you need to be inside your sub.

Do not ALT-TAB out of the game because keyboard commands will cease to work or grafical oddities can happen (invisible crew, messed-up teleport etc.) If it happens, save & reload.

For the TWoS mod to work correctly your game folder must be a non-protected one and you need all executables start in 'Admin rights' mode. For not setting all that manually it's best to install game elsewhere than the default proposed Ubisoft folder, e.g. C:\games\SilentHunter5.
Also not sure, but you may run into keyboard or font display problems if your system is different than US or European language settings; in this case set US keyboard (or German, or European) in Windows or change the 'Regional settings' in Windows>System to match your SH5 install language.

Green_Alien 07-16-18 11:58 AM

I'm not on the bridge. Going to Persicope Depth, Diving etc. works for me in the base game though, even on surface. Here none of the buttons do anything.

Also, what worries me is that I don't know my depth or speed, the numerical indicators show straight 00, even though being on surface at least depth should list something like 5 - 6.

XenonSurf 07-16-18 12:04 PM

What are you playing? Stock game or TWoS or other mods? If you use mods please publish your JSGME modlist. Go into JSGME > Tasks > 'Export activated Modlist'; this will create a file in the MODS folder. Paste it here. OR:

If you use TWoS version before 2.2.6, re-install game, update to v.1.2.0 and install TWoS 2.2.6. It's made so that you won't do errors if you follow install instructions.

If you use the stock game, how did you install it before playing? You cannot install and play the game, too many bugs and malfunctions.

Aktungbby 07-16-18 12:07 PM

Welcome aboard!
 
Green_Alien!

Green_Alien 07-16-18 12:13 PM

Quote:

Originally Posted by XenonSurf (Post 2561450)
What are you playing? Stock game or TWoS or other mods? If you use mods please publish your JSGME modlist. Go into JSGME > Tasks > 'Export activated Modlist'; this will create a file in the MODS folder. Paste it here.
If you use the stock game, how did you install it before playing? You cannot install and play the game, too many bugs and malfunctions.


I am playing TWoS yes.

See here for the depth and speed readings: https://i.imgur.com/SWX1Zjh.jpg

The left bar is unresponsive.

The stock game lists both depth and speed readings responsively to actual speed and depth and takes the commands.

Only other mod I use is the one that colours ships on the map, which comes with TWoS.


All times are GMT -5. The time now is 08:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1995- 2024 Subsim®
"Subsim" is a registered trademark, all rights reserved.