There are problems with the widescreen GUI at LSH3. Whether it is related to the creators update is not safe.
The Creators Update does not actually contain anything that could cause these problems.
CCoM works with Ahnenerbes Widescreen GUI and Widescreen MaGui and LSH3 is based on CCoM.

Hi Harm
The default LSH3 widescreen mod works with no problems at all.
I have just had a Windows 10 update to v1603 and it is working fine.

I have had an email from LSH3 support that the latest Windows update Creator v1703 has caused a problem with the widescreen mod.
Until this is fixed it will delay LSH3-2017 being released.

LSH3 support do not have Windows 10 and I cannot presently help them until my system updates to Creator.

Microsoft is I believe currently updating those who purchased Windows 10 on systems and dvd with those who updated from Windows 7 to Windows 10 to be updated later.
Peter
https://s13.postimg.org/5shhdebs7/ls...oad_banner.gif

Hi Peter,

with v1603 the widescreen GUI works, with v1703 not.

You can download and install v1703, when you go to settings/update and security and signing on for the creators update. Click on the blue writing.
After confirming the privacy policy, you will receive the creators update.

As I said, Ahnenerbe's widescreen and MaGui work with CCoM under v1703. LSH3 V15 is based on CCoM.

Harm

Hi Harm
Interestingly, I found Ahnenerbe's wide screen mod never was fully wide screen with LSH3-2015, there was always a gap down the sides even though it was 1920 x 1080.
Does it work in full widescreen screen mode without the gaps now with Creator installed?
Peter

https://s13.postimg.org/5shhdebs7/ls...oad_banner.gif

Hi Peter,

unfortunately I do not know it. My Lenovo T520 has only a resolution of 1600x900 and the creators update can not be installed, the installation breaks with an error message. Ahnenerbes widescreen can be installed, but the compass is only a quarter on the screen.

But there is good news. Hauptmann from the LSH3 team has found a solution.

Here is his post from the forum of designmodproject.de

"Hi, Sorry for the english below...

First, keep in mind Windows Creators is still in beta/Developer preview. So your graphic driver is not probably up-to-date... at least from a Microsoft Point-of-view... Yet, some Manufacturers may provide an update for that upcoming upgrade. But given such updates from the manufacturer may not be fully certified/tested for build 1703, It should be best (for the time being) to rely on Microsoft graphic driver instead of the one from the manufacturer. Here how:

Procedure to upgrade manually the graphic driver issued by Microsoft:

1- go to "Control Panel" - "All Control Panel Items" - "Administrative Tools"
2- right-click on "Computer Management" and select "Run as Administrator"
3- You will see in the tree-view "Device Manager", click on it
4- In the tree-view select "Display Adapters", your graphic card should be listed under it.
5- Right-Click your graphic card and in the menu, select "Update Driver Software..."
6- A Dialog is displayed. Select "Search automatically for Updated Driver Software"
7- "Searching Online for software..."is displayed for a while with a progress bar
8- Windows may find a better driver than the one you had before your Win 10 upgrade.
9- Reboot the computer!
10- relaunch LSH3 with only the main mode and WS-GUI mod.
11- if the game starts to main menu screen all works fine


I have two (2) machines: First machine (ALPHA) with an AMD Radeon 290 R2 Graphic card, the second machine (BRAVO) has an Nvidia 750i graphic card + embedded Intel graphics card 4006.

RESULTS:
Both machines are running LSH3 V15 in WIDESCREEN (both WS-GUI and WS-OLC Flavours tested )

I got the blackScreen with the Nvidia card, which I solved with the procedure outlined before. Unlike many I'm also always going through "New Career", which write fresh config files under "My Documents" folder.

Note: d3d9.dll and d3d9.ini files are OK. They are not the cause of the black screen.

Cheers

Hauptmann"

A user from designmodprojekt has found out that following drivers for nvidia solved the problem.

378.92 20.3.2017
376.33 14.12.2017
352.63 29.4.2015

If you have a driver with 38x installed, you must downgrade to solve the problem.

As soon as I know something about the AMD drivers, I post it.

Harm

Hi Harm
Thanks for the very useful information.
I am in the middle of a patrol currently so I am going to wait until I dock and then update windows.
Incidentally my driver is one of the listed 376.33 14.12.2017
Peter
https://s13.postimg.org/5shhdebs7/ls...oad_banner.gif

What a beauty!
 

I finally have a new Asus PC and can now run Living Silent Hunter III 2015 Edition with all the bells and whistles activated. It is really impressive. Thanks to the LSH team for all your work. Really looking forward to your next release.:yeah:

Kelly621

Hi Kelly
Good to have you on board.:Kaleun_Salute:
Loads of help in my signature.
Peter
https://s13.postimg.org/5shhdebs7/ls...oad_banner.gif

Hi all

Thank you for your im portant information to the new Windows Updates (includig the new Grafik-Driver updates from Nvidia/Amd).

In fact: Since Microsoft release first (beta) Creators Update for W10 lots of players have problem now to start LSH3 with additional WS-GUI (Game load, sounds well but only black screen).
Since a view weeks i know also about problem by W7(!) in combination newest Grafik-Drivers as well!

Dear Harm,
the great widescreen GUI-Mods "Ahnenerbe" and "MaGUI" ar NOT comparable with the LSH3 widescreen GUI conception.

Both use other (older) d3d9.dll and both use differen d3d9.ini settings as LSH3. Only Ahnenerbe use the real HD res 1920x1080, great work but the one and important real scalling problem in game (Maps/Grids and stuff) still not solved yet.

Our goal is to mod the "whole" SH3 game conten "full scalable" up to 1920x1080! Hauptman works on it.

+++++++++++++

My advice to once who have unecpectet problems with WS now (game load, sounds OK but only black screen) is:

1. Deinstall the damn "W10 Creators update"
2. And/or reinstall an older but working Grafig-Driver (here Nvidia facts)

382.05 NO 4.5.2017
381.89 NO 25.4.2017
381.65 NO 6.4.2017
378.92 YES Der aktuellste der 70er Reihe 20.3.2017
376.33 YES 14.12.2016
352.63 YES Von Sieke getestet. 29.4.2015


Another hot hint is to change the (width) resollution from 1360px up to 1366px! Try this - change the:

1. Open "d3d9.ini" (file iclude in every LSH3 v15 WS GUI) in texteditor...
2. Change Line 12 "DisplayWidth=1360" to "DisplayWidth=1366"
3. Save and reactivate the WS Mod

Right now we know that this works by some of our tester!

++++++++++++++++++++

All in all, we need more information and more feedback from all who have this "MS update problem" right now!

In fact we cant release "LSH3 Edition 2017" before we dont know exactly what the problem is.

Thanx for all who give us newset informations about!

Best regards from Urmel :-)

Big Thank You Urmel !

:up:

Hi Urmel
Did not see my driver 376.53 in your list?
Peter
https://s13.postimg.org/5shhdebs7/ls...oad_banner.gif

Hey there everyone

I am new to the LSH Team trying to give you a bit of support as far as i can.

As long as your WS Mod is working with the driver everything is ok. Or do you have any issuse ?

A Warm Welcome To The Subsim Community > Kpt.Graubart
Subsim <> How To Donate <> See The Benefits <> Support The Community:salute:
I am still on W10 v1607 waiting to update to v1703.
Just finished 9th Patrol and docked in Brest.

https://s13.postimg.org/5shhdebs7/ls...oad_banner.gif

I did not say that. I've just pointed out that the widescreen GUIs work at CCoM and that LSH3 V15 is based on CCoM. No more and no less.

Does not seem to work for me with a Radeon RX470.

Since Windows upgraded non of my SH3 installs work, vanilla, GWX or LSH.
:mad: